Gargoyle Forum

jkemenade wrote:

jkemenade wrote:upgrade from 1.5.8 went smooth on TP-LINK 1043ND.
Except for one thing: can't connect with OpenVPN client anymore.

Tried to download the client-files again: ERROR: Client ID does not exist.

Resolved it the hard way: re-install v1.5.9 and manually entered all settings (as opposite to restore the backup from v1.5.8)

John

Yes, met the the same issue and resolved the same way, by restoring default settings.
Restoring settings from version 1.5.7 is not correct. Made everything manually or with files comparison and editing the default' ones.
there are many dfferences, not only OpenVPN.

[/quote]

Yes, met the the same issue and resolved the same way, by restoring default settings.
Restoring settings from version 1.5.7 is not correct. Made everything manually or with files comparison and editing the default' ones.
there are many dfferences, not only OpenVPN.[/quote]

read this

Eric wrote:This version implements a web interface for installing gargoyle plugins (for now mostly different UI themes) via the web interface. This makes it much easier to extend the core Gargoyle functionality.

New in 1.5.9:

• New Plugin Interface (System/Plugins)
• Bump OpenWrt version to Attitude Adjustment RC-1
• Multiple minor fixes for usb-storage implementation
• Fixes bug that can (sometimes) cause bandwidth monitor to reset if network restarts
• Fixes bug in bandwidth monitor display that can cause a single month to show up multiple times after a time-zone change
• Fixes bug in OpenVpn client mode when configured to use TCP

InvisibleMan1002 wrote:

SirLancelot1982 wrote:In every Gargolye version I install I use "Scheduled Reboot" function.

I set it every time to reboot my device:

Every week -> Wednesday -> XX:XX AM

Today after work I figured out that router is rebooted as I scheduled but without any WiFi. Even WiFi LED on the front panel of the device was not active.

I will try "Scheduled Reboot" with different settings. Could somebody test it too and write how it works on Gargoyle 1.5.9?

I have the same issue with my Buffalo WZR-HP-G300NH2.
I was able to get the WiFi turned back on by going to connection and changing the channel and saving changes.
Then it started back up.

Had the same issue here as well (WZR-HP-G300NH). I got mine working again by leaving it unplugged for about five minutes or so, and then plugging it back in. Resetting the router via the web interface did not work. Also, I was not able to restore my previous settings. After I tried, the router became unresponsive and I wound up having to use failsafe mode to get it going again.

Everything seems to be working ok now though, so no biggie.

Stupid question:

Where do we go to get plugins? I understand the feature is relatively new (at least in terms of the GUI) so I imagine there aren't many available.

Still, I thought I'd ask.

thormolecules wrote:Stupid question:

Where do we go to get plugins? I understand the feature is relatively new (at least in terms of the GUI) so I imagine there aren't many available.

Still, I thought I'd ask.

Has GUI on plugins.sh

Plugin Sources:
Name
attitude_adjustment
http://downloads.openwrt.org/attitude_a ... c/packages Preset
gargoyle
http://www.gargoyle-router.com/packages ... 1.6/ar71xx Preset

Add Name:
Add URL:

jkemenade wrote:Resolved it the hard way: re-install v1.5.9 and manually entered all settings (as opposite to restore the backup from v1.5.8)

John

Hi John could you test for me please see if you have same issue, thanks

yc3948 wrote:when you set "All Client Traffic" openvpn connected access internet through explorer should use openvpn Server public IP, it working fine on 1.5.5, but on 1.5.9 "All Client Traffic" still use your own public IP (same as set " Only Traffic Destined for Hosts Behind VPN")

"Allow Clients To Communicate With Each Other" alson not working, can't see other Clients on the LAN

[/quote]

Bajramo wrote:I want to ask the developers or the more experienced users.
My router is 1043ND v 1.8 using Gargoyle 1.5.9
While using Wireless N mode at 20 Mhz (150Mbit/s) i have no problems at all. If I use 40 Mhz (300Mbit/s) the wi-fi drops after day or two. I ssh to the router, bring down the wi-fi and then back up and it's working for 2-3 day's.

If i use the wi-fi at 20 Mhz I have no problems.

I just want to mention that I have a cordless phone next to the router. Can that be a problem?

I would like to have the opinion of Eric or some of the developers. Thanks

Still no answer about my problem, please once again.

yc3948 wrote:

jkemenade wrote:Resolved it the hard way: re-install v1.5.9 and manually entered all settings (as opposite to restore the backup from v1.5.8)

John

Hi John could you test for me please see if you have same issue, thanks

yc3948 wrote:when you set "All Client Traffic" openvpn connected access internet through explorer should use openvpn Server public IP, it working fine on 1.5.5, but on 1.5.9 "All Client Traffic" still use your own public IP (same as set " Only Traffic Destined for Hosts Behind VPN")

"Allow Clients To Communicate With Each Other" alson not working, can't see other Clients on the LAN

[/quote]

I'm not John but have the same issue with public IP.
As I understand there is no route to Internet through your private router (Gargoyle) when OpenVPN is connected.
Check yours routes with Net Swiss Tool. When OpenVPN is connected your traffic goes through default gateway which is still primary connection gateway.

Iface Destination Gateway Flags RefCnt Use Metric Mask MTU Window IRTT
ccmni0 213.87.0.1 0.0.0.0 5 0 0 0 255.255.255.255 0 0 0
ccmni0 172.29.41.221 0.0.0.0 5 0 0 0 255.255.255.255 0 0 0
ccmni0 213.87.1.1 0.0.0.0 5 0 0 0 255.255.255.255 0 0 0
tun0 192.168.1.0 10.8.0.1 3 0 0 0 255.255.255.0 0 0 0
tun0 10.8.0.0 0.0.0.0 1 0 0 0 255.255.255.0 0 0 0
ccmni0 172.29.0.0 0.0.0.0 1 0 0 0 255.255.0.0 0 0 0
ccmni0 0.0.0.0 172.29.41.221 3 0 0 0 0.0.0.0 0 0 0

Through Gargoyle gateway goes traffic only to your local Gargoyle subnet (192.168.1.0 in my case)

do you know how to fix it?

7PBHChD wrote:

yc3948 wrote:

jkemenade wrote:Resolved it the hard way: re-install v1.5.9 and manually entered all settings (as opposite to restore the backup from v1.5.8)

John

Hi John could you test for me please see if you have same issue, thanks

yc3948 wrote:when you set "All Client Traffic" openvpn connected access internet through explorer should use openvpn Server public IP, it working fine on 1.5.5, but on 1.5.9 "All Client Traffic" still use your own public IP (same as set " Only Traffic Destined for Hosts Behind VPN")

"Allow Clients To Communicate With Each Other" alson not working, can't see other Clients on the LAN

I'm not John but have the same issue with public IP.
As I understand there is no route to Internet through your private router (Gargoyle) when OpenVPN is connected.
Check yours routes with Net Swiss Tool. When OpenVPN is connected your traffic goes through default gateway which is still primary connection gateway.

Iface Destination Gateway Flags RefCnt Use Metric Mask MTU Window IRTT
ccmni0 213.87.0.1 0.0.0.0 5 0 0 0 255.255.255.255 0 0 0
ccmni0 172.29.41.221 0.0.0.0 5 0 0 0 255.255.255.255 0 0 0
ccmni0 213.87.1.1 0.0.0.0 5 0 0 0 255.255.255.255 0 0 0
tun0 192.168.1.0 10.8.0.1 3 0 0 0 255.255.255.0 0 0 0
tun0 10.8.0.0 0.0.0.0 1 0 0 0 255.255.255.0 0 0 0
ccmni0 172.29.0.0 0.0.0.0 1 0 0 0 255.255.0.0 0 0 0
ccmni0 0.0.0.0 172.29.41.221 3 0 0 0 0.0.0.0 0 0 0

Through Gargoyle gateway goes traffic only to your local Gargoyle subnet (192.168.1.0 in my case)[/quote]

1. you need to set WAN first before using plugins , and need a reboot while themes installed ,then you can enjoy themes!

2. pppoe bug since 1.5.8 not fixed yet . I still cant use pppoe Reconnect Mode by "Connect on demand"