Version 1.5.9 - Plugins Interface

The latest news about Gargoyle

Moderator: Moderators

yc3948
Posts: 164
Joined: Sat Sep 10, 2011 1:04 am

Re: Version 1.5.9 - Plugins Interface

Post by yc3948 »

I think it only for old free account otherwise will have many report here.
FireVortex wrote:
yc3948 wrote: Do you know when No-IP make this change? And it only affect free hosts(No-IP Free) or affect all hosts? Because my hosts( No-IP Plus) working fine until now. Thanks
Sorry, I've no idea. Plus, I only have a Free Account :( (created few years ago) and I don't/can't test it with a Plus Account.
Buffalo WZR-HP-G300NH2 DD-WRT v24SP2-MULTI (10/31/11) std
Buffalo WZR-HP-G300NH Gargoyle 1.5.9+1f082daf
Linksys WRT54GL Gargoyle 1.4.4
TP-Link TL-WR1043ND Gargoyle 1.5.9+1f082daf

pmerrill
Posts: 290
Joined: Wed Feb 15, 2012 8:23 pm

Re: Version 1.5.9 - Plugins Interface

Post by pmerrill »

Thought I would pass this information on about 1.5.9.

I flashed my new TP-Link WDR4300 from stock firmware, so not an upgrade from 1.5.8.

Thus far, the system has been rock solid, it's been up for 5 days, 18 hours, no problems with wireless, no problems with wired connections. I do use:
  • OpenDNS
  • Firewall restrictions on a schedule
  • QoS for VoIP operations
but have not used the USB ports, TOR nor OpenVPN.

The ONLY problem I have thus far, with no solution, is my xBox will not connect wirelessly to the router.

I'm wondering whether some of the problems experienced thus far can be attributed to upgrades between 1.5.8 and 1.5.9? Perhaps a revert to stock followed by a 1.5.9 install may fix some of the problems?

Overall, except for the xBox problem which I suspect is really an OpenWRT problem, Gargoyle 1.5.9 is great!
Paul
Gargoyle 1.11.x on TP-Link Archer C7 V2 H/W

pmerrill
Posts: 290
Joined: Wed Feb 15, 2012 8:23 pm

Re: Version 1.5.9 - Plugins Interface

Post by pmerrill »

One possible issue I see in my dmesg for 1.5.9 is:
[346121.820000] net_ratelimit: 54 callbacks suppressed
[346121.820000] nf_conntrack: table full, dropping packet.
[346122.010000] nf_conntrack: table full, dropping packet.
[346122.180000] nf_conntrack: table full, dropping packet.
[346122.280000] nf_conntrack: table full, dropping packet.
[346122.290000] nf_conntrack: table full, dropping packet.
[346122.300000] nf_conntrack: table full, dropping packet.
[346122.300000] nf_conntrack: table full, dropping packet.
[346122.310000] nf_conntrack: table full, dropping packet.
[346122.310000] nf_conntrack: table full, dropping packet.
[346122.320000] nf_conntrack: table full, dropping packet.

What's this and are there any setting I can adjust to get rid of it if it's a problem?
Paul
Gargoyle 1.11.x on TP-Link Archer C7 V2 H/W

yousaf465
Posts: 49
Joined: Mon Nov 26, 2012 5:19 am

Re: Version 1.5.9 - Plugins Interface

Post by yousaf465 »

m0ved.
Last edited by yousaf465 on Sat Jan 26, 2013 10:02 pm, edited 1 time in total.

pbix
Developer
Posts: 1373
Joined: Fri Aug 21, 2009 5:09 pm

Re: Version 1.5.9 - Plugins Interface

Post by pbix »

Folks who feel they are having problems with any version of Gargoyle are well advised to make their own posts in the appropriate forum section.

The news post is not the proper place to report a problem or request help.
Linksys WRT1900ACv2
Netgear WNDR3700v2
TP Link 1043ND v3
TP-Link TL-WDR3600 v1
Buffalo WZR-HP-G300NH2
WRT54G-TM

ruslan
Posts: 1
Joined: Fri Feb 01, 2013 3:27 am

Re: Version 1.5.9 - Plugins Interface

Post by ruslan »

Hello. Using TP-Link 1043WR with Gargoyle v1.5.9
Have a problem then using FTP: after uploading file to ftp from any device (tested on pc and phone), file succesfully uploads to ftp folder (size matches), but afterwards I can't open this file or download it. The only thing that I can do with it - delete.
Using CIFS, I can't open this file too, only delete.
What am I doing wrong?

lceron80
Posts: 113
Joined: Sun Jul 24, 2011 3:42 pm

Re: Version 1.5.9 - Plugins Interface

Post by lceron80 »

ruslan wrote:Hello. Using TP-Link 1043WR with Gargoyle v1.5.9
Have a problem then using FTP: after uploading file to ftp from any device (tested on pc and phone), file succesfully uploads to ftp folder (size matches), but afterwards I can't open this file or download it. The only thing that I can do with it - delete.
Using CIFS, I can't open this file too, only delete.
What am I doing wrong?
i was having the same issue, seems to be permissions related. check out my post. i had to revert back to 1.5.8 to fix issues. which ftp program are you using? if you are using filezilla you can check file properties and you'll see that you don't have permissions to open or do anything else with the file after you've uploaded through ftp.

my post

http://www.gargoyle-router.com/phpbb/vi ... ons#p16421
1x wndr3700v4 exp. 1.9.x
1x wndr3800 exp. 1.9.x
1x wndr4300v1 exp. 1.9.x
1x wndrmacv2 exp. 1.9.x

behappy
Posts: 84
Joined: Thu Mar 31, 2011 5:06 pm

Re: Version 1.5.9 - Plugins Interface

Post by behappy »

lceron80 wrote:
ruslan wrote:Hello. Using TP-Link 1043WR with Gargoyle v1.5.9
Have a problem then using FTP: after uploading file to ftp from any device (tested on pc and phone), file succesfully uploads to ftp folder (size matches), but afterwards I can't open this file or download it. The only thing that I can do with it - delete.
Using CIFS, I can't open this file too, only delete.
What am I doing wrong?
i was having the same issue, seems to be permissions related. check out my post. i had to revert back to 1.5.8 to fix issues. which ftp program are you using? if you are using filezilla you can check file properties and you'll see that you don't have permissions to open or do anything else with the file after you've uploaded through ftp.

my post

http://www.gargoyle-router.com/phpbb/vi ... ons#p16421
Hi guys,

I had probl. w. vsftpd too. Solved by update the opkg from http://ecco.selfip.net/gargoyle-pl/atti ... /packages/

The package http://ecco.selfip.net/gargoyle-pl/atti ... ar71xx.ipk

Some thing wrong in the vsftpd template from 1.5.9 build!

Cezary
Posts: 135
Joined: Thu Sep 11, 2008 12:57 pm
Location: Poland
Contact:

Re: Version 1.5.9 - Plugins Interface

Post by Cezary »

File permissions in template. I've sent fix to repo: https://github.com/obsy/gargoyle/commit ... c7ab1ea0a3

r2d2
Posts: 1
Joined: Sat Feb 02, 2013 12:48 pm

Re: Version 1.5.9 - Plugins Interface

Post by r2d2 »

Hi i have question,have plans to include transmission package to plugins ?!

Post Reply