Version 1.5.9 - Plugins Interface

The latest news about Gargoyle

Moderator: Moderators

User avatar
powerlogy
Posts: 67
Joined: Wed Aug 22, 2012 12:04 pm
Location: Turkey

Re: Version 1.5.9 - Plugins Interface

Post by powerlogy »

Keep up

ispyisail
Moderator
Posts: 5180
Joined: Mon Apr 06, 2009 3:15 am
Location: New Zealand

Re: Version 1.5.9 - Plugins Interface

Post by ispyisail »


ispyisail
Moderator
Posts: 5180
Joined: Mon Apr 06, 2009 3:15 am
Location: New Zealand

Re: Version 1.5.9 - Plugins Interface

Post by ispyisail »


User avatar
Krog
Posts: 47
Joined: Mon May 06, 2013 4:50 pm

Re: Version 1.5.9 - Plugins Interface

Post by Krog »

HI :D

WR-741ND V4 -Version 1.5.9 it seems its working fine

in client+ap

the default dbm is set in 27 dbm i need put more low??
TL-WR-741ND V4.20 -Version 1.9.X
TL-WA-701ND V1.2 - Version 1.9.X
TL-WA-701ND V2.1 - Version 1.9.X
TL-WR-741ND V4.22 X 3 -Version 1.9.X
TL-WR-841ND V8 -Version 1.9.X
TL-WA-901ND V3 - Version 1.9.X

trance89
Posts: 12
Joined: Tue May 07, 2013 3:58 am

Re: Version 1.5.9 - Plugins Interface

Post by trance89 »

Krog wrote:HI :D

WR-741ND V4 -Version 1.5.9 it seems its working fine

in client+ap

the default dbm is set in 27 dbm i need put more low??
i have a v2.4 741ND too and it's working fine with 1.5.9 as a wireless repeater for months now
27 dbm is the default value so leave it that way if you don't want smaller wifi coverage

User avatar
DoesItMatter
Moderator
Posts: 1373
Joined: Thu May 21, 2009 3:56 pm

Re: Version 1.5.9 - Plugins Interface

Post by DoesItMatter »

Krog wrote:HI :D

WR-741ND V4 -Version 1.5.9 it seems its working fine

in client+ap

the default dbm is set in 27 dbm i need put more low??
http://wireless.kernel.org/en/users/Documentation/iw

run the command

iw list

from the command line after you telnet/ssh into the router

Even though it shows 27dbm, the max output your router can
do is listed in that "iw list" command
:twisted: Soylent Green Is People! :twisted:
2x Asus RT-N16 = Asus 3.0.0.4.374.43 Merlin
2x Buffalo WZR-HP-G300NH V1 A0D0 = Gargoyle 1.9.x / LEDE 17.01.x
2x Engenius - ESR900 Stock 1.4.0 / OpenWRT Trunk 49400

trance89
Posts: 12
Joined: Tue May 07, 2013 3:58 am

Re: Version 1.5.9 - Plugins Interface

Post by trance89 »

mine (v2.4 rev) says this:
Frequencies:
* 2412 MHz [1] (27.0 dBm)
* 2417 MHz [2] (27.0 dBm)
* 2422 MHz [3] (27.0 dBm)
* 2427 MHz [4] (27.0 dBm)
* 2432 MHz [5] (27.0 dBm)
* 2437 MHz [6] (27.0 dBm)
* 2442 MHz [7] (27.0 dBm)
* 2447 MHz [8] (27.0 dBm)
* 2452 MHz [9] (27.0 dBm)
* 2457 MHz [10] (27.0 dBm)
* 2462 MHz [11] (27.0 dBm)
* 2467 MHz [12] (disabled)
* 2472 MHz [13] (disabled)
* 2484 MHz [14] (disabled)

User avatar
Krog
Posts: 47
Joined: Mon May 06, 2013 4:50 pm

Re: Version 1.5.9 - Plugins Interface

Post by Krog »

thanks DoesItMatter i gona to see who use tenel

trance89 who you make that to see the info?

well if is the same router i think is safe the 27dbm
TL-WR-741ND V4.20 -Version 1.9.X
TL-WA-701ND V1.2 - Version 1.9.X
TL-WA-701ND V2.1 - Version 1.9.X
TL-WR-741ND V4.22 X 3 -Version 1.9.X
TL-WR-841ND V8 -Version 1.9.X
TL-WA-901ND V3 - Version 1.9.X

User avatar
DoesItMatter
Moderator
Posts: 1373
Joined: Thu May 21, 2009 3:56 pm

Re: Version 1.5.9 - Plugins Interface

Post by DoesItMatter »

Krog wrote:thanks DoesItMatter i gona to see who use tenel

trance89 who you make that to see the info?

well if is the same router i think is safe the 27dbm
https://dev.openwrt.org/ticket/10034

Read that ticket, all the way at the bottom

WR741ND has max output of 17dbm (+ 3dmb for default antenna)

Even though it may show 27dbm, the max it will output is 17dbm
because that is a limitation of the hardware.

IF you have a consumer router - it is highly unlikely it will go
over 20dbm = 100mw

There are some that will output 1/2watt = 27dbm - but those are rare
The more wattage you put out, the hotter the device will run
:twisted: Soylent Green Is People! :twisted:
2x Asus RT-N16 = Asus 3.0.0.4.374.43 Merlin
2x Buffalo WZR-HP-G300NH V1 A0D0 = Gargoyle 1.9.x / LEDE 17.01.x
2x Engenius - ESR900 Stock 1.4.0 / OpenWRT Trunk 49400

User avatar
Krog
Posts: 47
Joined: Mon May 06, 2013 4:50 pm

Re: Version 1.5.9 - Plugins Interface

Post by Krog »

:D

i read it

thanks DoesItMatter for the info

100mw is ok the router reach is awesome

and is working smooth
TL-WR-741ND V4.20 -Version 1.9.X
TL-WA-701ND V1.2 - Version 1.9.X
TL-WA-701ND V2.1 - Version 1.9.X
TL-WR-741ND V4.22 X 3 -Version 1.9.X
TL-WR-841ND V8 -Version 1.9.X
TL-WA-901ND V3 - Version 1.9.X

Post Reply