Page 12 of 15
Re: Version 1.5.8 - USB Storage with FTP
Posted: Mon Nov 12, 2012 10:04 am
by jkemenade
Is it possible to manually change the generated UDP configs to deal with the subtle TCP bug? If so, what files and what change?
don't feel confident in building my own firmware but would like to have OpenVPN over TCP
John
Re: Version 1.5.8 - USB Storage with FTP
Posted: Mon Nov 12, 2012 10:26 am
by jkemenade
solved; changed in the .conf and .ovpn files udp to tcp and it worked.
Re: Version 1.5.8 - USB Storage with FTP
Posted: Tue Nov 13, 2012 1:00 pm
by Dragon31337
Is there an option to enable FTP to be accessible from internet?
I'm ready to modify config files via telnet, I just don't know what should I tweak.
Re: Version 1.5.8 - USB Storage with FTP
Posted: Tue Nov 13, 2012 2:23 pm
by Eric
Dragon31337: Not in 1.5.8, but I just implemented this and it is there if you build from source or wait for 1.5.9.
Re: Version 1.5.8 - USB Storage with FTP
Posted: Tue Nov 13, 2012 3:39 pm
by Dev_BR
Is there any plans to support mikrotik routerboards ?
Re: Version 1.5.8 - USB Storage with FTP
Posted: Thu Nov 15, 2012 4:38 am
by hlfstephen
Thanks for Eric's good job! But I have to say that my tplink wr741n v1 drops when I download using bt for several minites. Will you fix it?
Re: Version 1.5.8 - USB Storage with FTP
Posted: Thu Nov 15, 2012 5:15 am
by Dev_BR
hlfstephen wrote:Thanks for Eric's good job! But I have to say that my tplink wr741n v1 drops when I download using bt for several minites. Will you fix it?
Could it be a max connection limit overflow ?
Re: Version 1.5.8 - USB Storage with FTP
Posted: Thu Nov 15, 2012 6:19 am
by SirLancelot1982
After no response on this forum about my bricked TL-WR1043ND router goes to TP-LINK Service.
After Gargoyle 1.5.8 flash my printer EPSON Stylus DX7450 prints nothing plugged into routers USB port. I back to TP-LINK Firmware directly from Gargoyle 1.5.8 and my router blinks leds all the time and get no response with any described methods of unbrick.
Earlier versions of Gargoyle makes directly upgrade into TP-LINK Firmware correctly. I have tried this on Gargoyle 1.4.7, 1.5.7 and never bricked earlier my router. Please look on 1.5.8 version to bring back this option in next Gargoyle versions.
Re: Version 1.5.8 - USB Storage with FTP
Posted: Fri Nov 16, 2012 11:21 am
by Jeah
Rapsody wrote:Hi,
Device Name:Gargoyle
Gargoyle Version:1.5.8
Model:TP-Link TL-WR1043N/ND v1
Device Configuration:Gateway
Connect via: PPPOE
Reconnect mode: Connect on demand 5 minutes
Not connecting to the network. If i choose Keep Alive it works.
IS there any way to setup to a working configuration "connect on demand" ?
Hi,
Device Name:Gargoyle
Gargoyle Version:1.5.8
Model:TP-Link TL-WR1043N/ND v1
Device Configuration:Gateway
Connect via: PPPOE
Reconnect mode: Connect on demand 5 minutes
Not connecting to the network. If i choose Keep Alive it works.
IS there any way to setup to a working configuration "connect on demand" ?
Also i cannot install miniDlna. Error:
Only have 684kb available on filesystem /overlay, pkg libffmpeg-mini needs 704
On 1.4.7 version i can install it.
Thanks
Thanks
yes! that is a bug
Re: Version 1.5.8 - USB Storage with FTP
Posted: Fri Nov 16, 2012 12:05 pm
by DoesItMatter
hlfstephen wrote:Thanks for Eric's good job! But I have to say that my tplink wr741n v1 drops when I download using bt for several minites. Will you fix it?
You are probably overloading your router
Goto Firewall options and set max connections = 2048
Set TCP/UDP timeouts to 300 or maybe even 150
Apply those and reboot the router.