Version 1.5.8 - USB Storage with FTP

The latest news about Gargoyle

Moderator: Moderators

jkemenade
Posts: 21
Joined: Mon Nov 12, 2012 4:15 am

Re: Version 1.5.8 - USB Storage with FTP

Post by jkemenade »

Is it possible to manually change the generated UDP configs to deal with the subtle TCP bug? If so, what files and what change?

don't feel confident in building my own firmware but would like to have OpenVPN over TCP

John

jkemenade
Posts: 21
Joined: Mon Nov 12, 2012 4:15 am

Re: Version 1.5.8 - USB Storage with FTP

Post by jkemenade »

solved; changed in the .conf and .ovpn files udp to tcp and it worked.

Dragon31337
Posts: 16
Joined: Sun Oct 30, 2011 10:14 am

Re: Version 1.5.8 - USB Storage with FTP

Post by Dragon31337 »

Is there an option to enable FTP to be accessible from internet?
I'm ready to modify config files via telnet, I just don't know what should I tweak.
TL-WR1043ND v1.8 - Gargoyle 1.5.8

Eric
Site Admin
Posts: 1443
Joined: Sat Jun 14, 2008 1:14 pm

Re: Version 1.5.8 - USB Storage with FTP

Post by Eric »

Dragon31337: Not in 1.5.8, but I just implemented this and it is there if you build from source or wait for 1.5.9.

Dev_BR
Posts: 87
Joined: Fri Jan 27, 2012 6:55 am

Re: Version 1.5.8 - USB Storage with FTP

Post by Dev_BR »

Is there any plans to support mikrotik routerboards ?

hlfstephen
Posts: 5
Joined: Thu Aug 18, 2011 1:52 pm

Re: Version 1.5.8 - USB Storage with FTP

Post by hlfstephen »

Thanks for Eric's good job! But I have to say that my tplink wr741n v1 drops when I download using bt for several minites. Will you fix it?

Dev_BR
Posts: 87
Joined: Fri Jan 27, 2012 6:55 am

Re: Version 1.5.8 - USB Storage with FTP

Post by Dev_BR »

hlfstephen wrote:Thanks for Eric's good job! But I have to say that my tplink wr741n v1 drops when I download using bt for several minites. Will you fix it?
Could it be a max connection limit overflow ?

User avatar
SirLancelot1982
Posts: 20
Joined: Wed Feb 08, 2012 4:01 pm

Re: Version 1.5.8 - USB Storage with FTP

Post by SirLancelot1982 »

After no response on this forum about my bricked TL-WR1043ND router goes to TP-LINK Service.

After Gargoyle 1.5.8 flash my printer EPSON Stylus DX7450 prints nothing plugged into routers USB port. I back to TP-LINK Firmware directly from Gargoyle 1.5.8 and my router blinks leds all the time and get no response with any described methods of unbrick.

Earlier versions of Gargoyle makes directly upgrade into TP-LINK Firmware correctly. I have tried this on Gargoyle 1.4.7, 1.5.7 and never bricked earlier my router. Please look on 1.5.8 version to bring back this option in next Gargoyle versions.
---

Best Regards

SirLancelot1982

#---#
ROUTER: TP-LINK TL-WR1043ND
HW: 1.8
SW: Gargoyle 1.5.8
#---#

Jeah
Posts: 5
Joined: Fri Nov 16, 2012 11:14 am

Re: Version 1.5.8 - USB Storage with FTP

Post by Jeah »

Rapsody wrote:Hi,

Device Name:Gargoyle
Gargoyle Version:1.5.8
Model:TP-Link TL-WR1043N/ND v1
Device Configuration:Gateway

Connect via: PPPOE
Reconnect mode: Connect on demand 5 minutes

Not connecting to the network. If i choose Keep Alive it works.
IS there any way to setup to a working configuration "connect on demand" ?

Hi,

Device Name:Gargoyle
Gargoyle Version:1.5.8
Model:TP-Link TL-WR1043N/ND v1
Device Configuration:Gateway

Connect via: PPPOE
Reconnect mode: Connect on demand 5 minutes

Not connecting to the network. If i choose Keep Alive it works.
IS there any way to setup to a working configuration "connect on demand" ?

Also i cannot install miniDlna. Error:
Only have 684kb available on filesystem /overlay, pkg libffmpeg-mini needs 704

On 1.4.7 version i can install it.

Thanks
Thanks
yes! that is a bug

User avatar
DoesItMatter
Moderator
Posts: 1373
Joined: Thu May 21, 2009 3:56 pm

Re: Version 1.5.8 - USB Storage with FTP

Post by DoesItMatter »

hlfstephen wrote:Thanks for Eric's good job! But I have to say that my tplink wr741n v1 drops when I download using bt for several minites. Will you fix it?
You are probably overloading your router

Goto Firewall options and set max connections = 2048

Set TCP/UDP timeouts to 300 or maybe even 150

Apply those and reboot the router.
:twisted: Soylent Green Is People! :twisted:
2x Asus RT-N16 = Asus 3.0.0.4.374.43 Merlin
2x Buffalo WZR-HP-G300NH V1 A0D0 = Gargoyle 1.9.x / LEDE 17.01.x
2x Engenius - ESR900 Stock 1.4.0 / OpenWRT Trunk 49400

Post Reply