Page 7 of 13
Re: Version 1.5.7 -- OpenWRT "Attitude Adjustment"
Posted: Mon Oct 01, 2012 1:25 am
by DoesItMatter
Dik0j wrote:Plaese, someone, tell me, what about wr1043nd, how this new firmware works on it?
i am afraid to flash it after last time (problem with password on 1.5.6)....
You should be able to flash 1.5.7 from 1.5.6 via the GUI
BUT - you CANNOT preserver settings - you HAVE to reset to defaults.
If you want to use 1.5.7 - safest way would be download the
firmware, then reset your router to defaults, then go ahead and
flash 1.5.7 and again UN-CHECK the Attempt to preserve settings
Once 1.5.7 is going - you can re-configure everything fresh
DO NOT load an old config file - reconfigure everything.
Re: Version 1.5.7 -- OpenWRT "Attitude Adjustment"
Posted: Mon Oct 01, 2012 2:32 am
by Dik0j
DoesItMatter wrote:Dik0j wrote:Plaese, someone, tell me, what about wr1043nd, how this new firmware works on it?
i am afraid to flash it after last time (problem with password on 1.5.6)....
You should be able to flash 1.5.7 from 1.5.6 via the GUI
BUT - you CANNOT preserver settings - you HAVE to reset to defaults.
If you want to use 1.5.7 - safest way would be download the
firmware, then reset your router to defaults, then go ahead and
flash 1.5.7 and again UN-CHECK the Attempt to preserve settings
Once 1.5.7 is going - you can re-configure everything fresh
DO NOT load an old config file - reconfigure everything.
I need to know HOW IT WORKS ON 1043ND)))
Re: Version 1.5.7 -- OpenWRT "Attitude Adjustment"
Posted: Mon Oct 01, 2012 6:49 am
by Corthalis
Why don't you TRY IT YOURSELF? If you don't like it then downgrade back to 1.5.6 and restore your old settings.
Re: Version 1.5.7 -- OpenWRT "Attitude Adjustment"
Posted: Mon Oct 01, 2012 8:30 am
by Slacker
Dik0j wrote:
I need to know HOW IT WORKS ON 1043ND)))
Working fine on a 1043nd 1.7, save for the small glitches reported earlier in the thread, which you should've read prior to posting.
Re: Version 1.5.7 -- OpenWRT "Attitude Adjustment"
Posted: Mon Oct 01, 2012 7:27 pm
by Dev_BR
0% CPU load ?
Connections:940/4096
CPU Load Averages:0.00 / 0.02 / 0.08 (1/5/15 minutes)
Re: Version 1.5.7 -- OpenWRT "Attitude Adjustment"
Posted: Tue Oct 02, 2012 5:25 am
by Dik0j
Corthalis wrote:Why don't you TRY IT YOURSELF? If you don't like it then downgrade back to 1.5.6 and restore your old settings.
I afraid of problems...
It is better for me to ask some one before doing this thing.
If it is not difficult for u, tell me what problems will i have on my device...
Re: Version 1.5.7 -- OpenWRT "Attitude Adjustment"
Posted: Tue Oct 02, 2012 5:48 am
by Dragon31337
sorry, I did not get the thing. Will the updater set default settings when I update to 1.5.7? from web interface. Or I have to do it manually before the flashing?
Re: Version 1.5.7 -- OpenWRT "Attitude Adjustment"
Posted: Tue Oct 02, 2012 6:44 am
by Dragon31337
Hm. Does anyone know why 12.09 disappeared from openwrt.org?
http://downloads.openwrt.org/attitude_adjustment/
Isn't it because of "attitude adjustment" instability?
Re: Version 1.5.7 -- OpenWRT "Attitude Adjustment"
Posted: Tue Oct 02, 2012 3:47 pm
by DoesItMatter
https://forum.openwrt.org/viewtopic.php?id=39117&p=3
See that page
OpenWRT had a huge RAID failure - they are undergoing recovery.
Attitude Adjustment is VERY stable from all the wireless testing
I have done with multiple Atheros radio devices - solid signal,
good transfer rate, and good up-time too.
Re: Version 1.5.7 -- OpenWRT "Attitude Adjustment"
Posted: Tue Oct 02, 2012 5:22 pm
by pmerrill
Any feedback on the Netgear 3700v2 performance and stability using V1.5.7? Should I wait for the final release? I'm really interested in wifi stability and range in the hopes it will improve over 1.4.6