Version 1.5.5: OpenVPN

The latest news about Gargoyle

Moderator: Moderators

g12345
Posts: 10
Joined: Tue Mar 06, 2012 9:09 pm

Re: Version 1.5.5: OpenVPN

Postby g12345 » Thu Jun 28, 2012 4:25 pm

Has anyone been able to get an OpenVPN server to work on this version? My issue is that if I choose VPN server in the GUI, I cannot save the configuration, I hit the save changes button and it doesn't do anything and will not turn the OpenVPN server on at all. I can configure a client just fine just not the server (which is what I need of course). Anyone had this issue? Is there something I need to do command line or anything like that? I got it to turn on once after doing a settings reset, it took 8 minutes and said it generated the key pairs, but it did not function at all and trying to make any changes to the config and I had the same issue with the save button not doing anything. I am using a WNDR3700v1 router, everything else works great but was really looking forward to VPN support. Any suggestions?

sco77
Posts: 43
Joined: Tue Nov 09, 2010 7:28 pm

Re: Version 1.5.5: OpenVPN

Postby sco77 » Fri Jun 29, 2012 8:56 am

Has the CPU load display been changed in any way? mine seems to show high values, I thought before 0.90 = 90% ?? .. but now if I run a speed test and pull in 80+ Mbps and check the load it goes upto 2.0 or higher.

lceron80
Posts: 104
Joined: Sun Jul 24, 2011 3:42 pm

Re: Version 1.5.5: OpenVPN

Postby lceron80 » Fri Jun 29, 2012 3:29 pm

you should try this

Post by lceron80 » Wed Jun 27, 2012 6:56 pm
yep i used mtd -r erase rootfs_data

it solved many issues i was having after upgrading. im not seeing any cpu load in my wndr3800...
1x wndr3700v4 exp. 1.9.x
1x wndr3800 exp. 1.9.x
1x wndr4300v1 exp. 1.9.x
1x wndrmacv2 exp. 1.9.x

User avatar
DoesItMatter
Moderator
Posts: 1373
Joined: Thu May 21, 2009 3:56 pm

Re: Version 1.5.5: OpenVPN

Postby DoesItMatter » Sat Jun 30, 2012 12:39 am

Wild Rat & Victor

Read this page:

http://linuxwireless.org/en/developers/Regulatory/CRDA

You won't find much tinkering help with the regulatory settings

OpenWRT does have some info on how you can "tweak" them though

I still have a copy of the tweaked "regulatory.bin" file if anyone needs it

PM me though, I'm not going to attach it to this post.

Sco77 - the more features added to the firmware, the more cpu load
imposed on the router. So yes, it is conceivable that, depending what
you have running/configured, that CPU load will increase
:twisted: Soylent Green Is People! :twisted:
2x Asus RT-N16 = Asus 3.0.0.4.374.43 Merlin
2x Buffalo WZR-HP-G300NH V1 A0D0 = Gargoyle 1.9.x / LEDE 17.01.x
2x Engenius - ESR900 Stock 1.4.0 / OpenWRT Trunk 49400

Draak
Posts: 8
Joined: Thu Dec 29, 2011 4:52 pm

Re: Version 1.5.5: OpenVPN

Postby Draak » Sat Jun 30, 2012 9:15 am

lceron80: Thanks for that!
Gargoyle 1.9.1 on Netgear WNDR3800

grtitan
Posts: 17
Joined: Sat Jun 30, 2012 2:48 pm

Re: Version 1.5.5: OpenVPN

Postby grtitan » Sat Jun 30, 2012 3:03 pm

hello Eric and fellow members.

First, thanks so much for your hard work with this great firmware.

I have a Netgear WNDR3700v2 and after upgrading to 1.5.5, i cannot do any changes to the OpenVPN settings.

Same as g12345, when i click on save settings, nothing happens.

any advice is greatly appreciated.

Cezary
Posts: 130
Joined: Thu Sep 11, 2008 12:57 pm
Location: Poland
Contact:

Re: Version 1.5.5: OpenVPN

Postby Cezary » Sun Jul 01, 2012 2:49 am

Make sure, that you have openvpn and openvpn-easy-rsa installed from gargoyle's repo (in version 2.1.4), not from backfire. Common mistake is install openvpn-easy-rsa in wrong version, without gargoyle specific files.

Dude_Virus
Posts: 13
Joined: Thu Feb 23, 2012 2:38 am

Re: Version 1.5.5: OpenVPN

Postby Dude_Virus » Sun Jul 01, 2012 3:02 am

Guys i desperately need help..i installed the 1.5.5 and again even after providing the wan ip etc in the router, i am not getting internet...the wan light stays off without any internet connection. My setup is a static wired connection and i have entered all the details properly. But after saving the settings it does not detect the connection. I can confirm that the wan port is fine as on the stock firmware the router works fine and it detects the internet connection. This confirms that there is no mac address blocking by my modem. I have even power cycled the modem...any information as to how to resolve this.

grtitan
Posts: 17
Joined: Sat Jun 30, 2012 2:48 pm

Re: Version 1.5.5: OpenVPN

Postby grtitan » Sun Jul 01, 2012 2:24 pm

Cezary wrote:Make sure, that you have openvpn and openvpn-easy-rsa installed from gargoyle's repo (in version 2.1.4), not from backfire. Common mistake is install openvpn-easy-rsa in wrong version, without gargoyle specific files.



Thanks for the info, Cezary, but sadly, i have no idea as to how to do any of that.

All i did was upgrade to 1.5.5 from 1.4.7, using the GUI.

I used this file:gargoyle_1.5.5-ar71xx-wndr3700v2-squashfs-sysupgrade.bin

No where in here i saw any reference for those packages.

Can you please point me in the right direction?

Thanks!

ispyisail
Moderator
Posts: 4194
Joined: Mon Apr 06, 2009 3:15 am
Location: New Zealand

Re: Version 1.5.5: OpenVPN

Postby ispyisail » Mon Jul 02, 2012 5:32 am

My OpenVPN work perfect to my knowledge

ubnt RSpro to TP-Link TL-WR1043ND v1-1.8


Return to “News”

Who is online

Users browsing this forum: No registered users and 8 guests