Page 4 of 6
Re: Version 1.5.3 & 1.4.6
Posted: Sat Feb 11, 2012 9:03 am
by sabrewulf
luddite wrote:Hi I just upgraded from 1.3.3 to 1.5.3 via the web interface and everything worked perfectly.
I imported the backup config and that was also perfect.
As far as I can tell everything works except the USB Storage.
The page loads in the web interface but there nothing there.
See below.
Anything I need to do? I have tried rebooting. I dont want to do a reset but I guess I will have to if needed....
Thanks for continually making this better.
The backup config doesn't seem to be compatible. I went from 1.5.2 to 1.5.3 and I had the same problem. After restoring from my backup.
Only way I could fix it was to re-flash and re-config manually
Re: Version 1.5.3 & 1.4.6
Posted: Sat Feb 11, 2012 6:49 pm
by luddite
sabrewulf wrote:
Code: Select all
config 'rule'
option 'name' 'TRANSMISSION_PORT_TCP'
option 'src' 'wan'
option 'proto' 'tcp'
option 'dest_port' '58499'
option 'target' 'ACCEPT'
config 'rule'
option 'name' 'TRANSMISSION_PORT_UDP'
option 'src' 'wan'
option 'proto' 'udp'
option 'dest_port' '58499'
option 'target' 'ACCEPT'
Am I looking at this wrong?
think you missing one line from each rule.
option 'src_dport' '58499'
also I could be wrong, you dont need
option 'target' 'ACCEPT'[/quote]
Good pickup: yes that fixed it
Re: Version 1.5.3 & 1.4.6
Posted: Sat Feb 11, 2012 6:51 pm
by luddite
sabrewulf wrote:
The backup config doesn't seem to be compatible. I went from 1.5.2 to 1.5.3 and I had the same problem. After restoring from my backup.
Only way I could fix it was to re-flash and re-config manually
Damn - re-flash? Or just a simple reset?
Re: Version 1.5.3 & 1.4.6
Posted: Sun Feb 12, 2012 10:00 am
by Adri
luddite wrote:sabrewulf wrote:
The backup config doesn't seem to be compatible. I went from 1.5.2 to 1.5.3 and I had the same problem. After restoring from my backup.
Only way I could fix it was to re-flash and re-config manually
Damn - re-flash? Or just a simple reset?
'reset to factory defaults' should be enough.
Then you'll have to reconfigure everything manually.
Re: Version 1.5.3 & 1.4.6
Posted: Sun Feb 12, 2012 11:39 am
by Wisse
Reporting in after successful upgrade from OpenWrt to Gargoyle (v1.4.6) on WRT160nl.
So far so good.
Re: Version 1.5.3 & 1.4.6
Posted: Thu Feb 16, 2012 3:52 am
by luddite
Adri wrote:luddite wrote:sabrewulf wrote:
'reset to factory defaults' should be enough.
Then you'll have to reconfigure everything manually.
ok-will do. so boring...
oh well. thanks.
Re: Version 1.5.3 & 1.4.6
Posted: Tue Feb 21, 2012 2:15 pm
by simpat1zq
I have an old WRT54G Version 2 router. Will Gargoyle router work with that?
Re: Version 1.5.3 & 1.4.6
Posted: Tue Feb 21, 2012 4:42 pm
by diskers
I can confirm that the csv bug is also on 1.5.3 but anyway only on the local network. Tried to get to the log from outside without any success.
Re: Version 1.5.3 & 1.4.6
Posted: Wed Feb 22, 2012 8:32 pm
by mix
simpat1zq wrote:I have an old WRT54G Version 2 router. Will Gargoyle router work with that?
Yeah it should work fine. If you are still using the stock firmware, use gargoyle_1.4.6-wrt54g-squashfs.bin, if you are running dd-wrt or tomato, you can use the .trx file.
Re: Version 1.5.3 & 1.4.6
Posted: Thu Feb 23, 2012 5:55 am
by Dude_Virus
I was able to successfully install the 1.4.6 on my wndr3700v2 ..but today when i tried to use the sysupgrade.bin file to upgrade to 1.5.3 it doesnt work.the upgrade process started and then it shows on screen tht upgrade complete, rebooting and its stuck on tht screen since the past 30 min...the progress circle is also stuck
Any help as to how to resolve this....i have let the router he on the same screen and havent rebooted or done a factory reset...should i try that