Version 1.5.3 & 1.4.6

The latest news about Gargoyle

Moderator: Moderators

sabrewulf
Posts: 5
Joined: Sun Mar 20, 2011 10:53 pm

Re: Version 1.5.3 & 1.4.6

Post by sabrewulf »

luddite wrote:Hi I just upgraded from 1.3.3 to 1.5.3 via the web interface and everything worked perfectly.

I imported the backup config and that was also perfect.

As far as I can tell everything works except the USB Storage.

The page loads in the web interface but there nothing there.

See below.

Image

Anything I need to do? I have tried rebooting. I dont want to do a reset but I guess I will have to if needed....

Thanks for continually making this better.
The backup config doesn't seem to be compatible. I went from 1.5.2 to 1.5.3 and I had the same problem. After restoring from my backup.

Only way I could fix it was to re-flash and re-config manually :(

luddite
Posts: 12
Joined: Thu Apr 21, 2011 8:29 pm

Re: Version 1.5.3 & 1.4.6

Post by luddite »

sabrewulf wrote:

Code: Select all

config 'rule'
        option 'name' 'TRANSMISSION_PORT_TCP'
        option 'src' 'wan'
        option 'proto' 'tcp'
        option 'dest_port' '58499'
        option 'target' 'ACCEPT'

config 'rule'
        option 'name' 'TRANSMISSION_PORT_UDP'
        option 'src' 'wan'
        option 'proto' 'udp'
        option 'dest_port' '58499'
        option 'target' 'ACCEPT'
Am I looking at this wrong?
think you missing one line from each rule.

option 'src_dport' '58499'

also I could be wrong, you dont need option 'target' 'ACCEPT'[/quote]

Good pickup: yes that fixed it :-)

luddite
Posts: 12
Joined: Thu Apr 21, 2011 8:29 pm

Re: Version 1.5.3 & 1.4.6

Post by luddite »

sabrewulf wrote:
The backup config doesn't seem to be compatible. I went from 1.5.2 to 1.5.3 and I had the same problem. After restoring from my backup.

Only way I could fix it was to re-flash and re-config manually :(
Damn - re-flash? Or just a simple reset?

Adri
Posts: 46
Joined: Wed Jul 20, 2011 4:03 am

Re: Version 1.5.3 & 1.4.6

Post by Adri »

luddite wrote:
sabrewulf wrote:
The backup config doesn't seem to be compatible. I went from 1.5.2 to 1.5.3 and I had the same problem. After restoring from my backup.

Only way I could fix it was to re-flash and re-config manually :(
Damn - re-flash? Or just a simple reset?
'reset to factory defaults' should be enough.
Then you'll have to reconfigure everything manually.

Wisse
Posts: 37
Joined: Wed Aug 10, 2011 6:19 am

Re: Version 1.5.3 & 1.4.6

Post by Wisse »

Reporting in after successful upgrade from OpenWrt to Gargoyle (v1.4.6) on WRT160nl.
So far so good.

luddite
Posts: 12
Joined: Thu Apr 21, 2011 8:29 pm

Re: Version 1.5.3 & 1.4.6

Post by luddite »

Adri wrote:
luddite wrote:
sabrewulf wrote: 'reset to factory defaults' should be enough.
Then you'll have to reconfigure everything manually.
ok-will do. so boring...

oh well. thanks.

simpat1zq
Posts: 6
Joined: Thu Nov 17, 2011 9:26 pm

Re: Version 1.5.3 & 1.4.6

Post by simpat1zq »

I have an old WRT54G Version 2 router. Will Gargoyle router work with that?

diskers
Posts: 13
Joined: Sun Nov 06, 2011 7:48 am

Re: Version 1.5.3 & 1.4.6

Post by diskers »

I can confirm that the csv bug is also on 1.5.3 but anyway only on the local network. Tried to get to the log from outside without any success.

mix
Posts: 292
Joined: Sun Feb 27, 2011 11:18 am

Re: Version 1.5.3 & 1.4.6

Post by mix »

simpat1zq wrote:I have an old WRT54G Version 2 router. Will Gargoyle router work with that?
Yeah it should work fine. If you are still using the stock firmware, use gargoyle_1.4.6-wrt54g-squashfs.bin, if you are running dd-wrt or tomato, you can use the .trx file.
WRT54GL v1.1
Gargoyle 1.4.7

Dude_Virus
Posts: 13
Joined: Thu Feb 23, 2012 2:38 am

Re: Version 1.5.3 & 1.4.6

Post by Dude_Virus »

I was able to successfully install the 1.4.6 on my wndr3700v2 ..but today when i tried to use the sysupgrade.bin file to upgrade to 1.5.3 it doesnt work.the upgrade process started and then it shows on screen tht upgrade complete, rebooting and its stuck on tht screen since the past 30 min...the progress circle is also stuck

Any help as to how to resolve this....i have let the router he on the same screen and havent rebooted or done a factory reset...should i try that

Post Reply