Version 1.5.2 & 1.4.5

The latest news about Gargoyle

Moderator: Moderators

kris87
Posts: 6
Joined: Thu Jun 02, 2011 8:48 am

Re: Version 1.5.2 & 1.4.5

Post by kris87 »

I'm using this 1.4.5 version of firmware on a TP-Link 741nd router and I have a problem with it.

I'm running an ftp server on my pc. I opened the port 21 in firewall and it works now from WAN, but doesn't work from LAN. My oc is connected to routher by wirelessly.

PS.: As I connect my pc to routher with an utp cable, it works from LAN too. Something is wrong with wifi...

frank604
Posts: 17
Joined: Thu Dec 01, 2011 1:01 am

Re: Version 1.5.2 & 1.4.5

Post by frank604 »

Quick question. I've been running 1.5.2 for 2 days or so. Wifi went down and the only msg out of place was xt_TCPMSS: bad length (40 bytes)
Repeating about 5 times. Is this the culprit and should I be concerned?

mini_fo: using base directory: /mini_fo: using storage directory: /over
ar71xx-wdt: enabling watchdog timer
br-lan: port 1(eth0.1) entering disable
device eth0 left promiscuous mode
device eth0.1 left promiscuous mode
br-lan: port 1(eth0.1) entering disable
eth1: link down
device eth0.1 entered promiscuous mode
device eth0 entered promiscuous mode
br-lan: port 1(eth0.1) entering forward
ar71xx: pll_reg 0xb8050014: 0x11110000
eth1: link up (1000Mbps/Full duplex)
device wlan0 entered promiscuous mode
br-lan: port 2(wlan0) entering forwardi
device wlan0 left promiscuous mode
br-lan: port 2(wlan0) entering disabled
device wlan0 entered promiscuous mode
br-lan: port 2(wlan0) entering forwardi
device wlan1 entered promiscuous mode
br-lan: port 3(wlan1) entering forwardi
device wlan1 left promiscuous mode
br-lan: port 3(wlan1) entering disabled
device wlan1 entered promiscuous mode
br-lan: port 3(wlan1) entering forwardi
xt_TCPMSS: bad length (40 bytes)
ath: Failed to stop TX DMA, queues=0x00
ath: DMA failed to stop in 10 ms AR_CR=
ath: Could not stop RX, we could be con
ath: Failed to stop TX DMA, queues=0x00
ath: DMA failed to stop in 10 ms AR_CR=
ath: Could not stop RX, we could be con
xt_TCPMSS: bad length (40 bytes)
xt_TCPMSS: bad length (40 bytes)
xt_TCPMSS: bad length (40 bytes)
xt_TCPMSS: bad length (40 bytes)
xt_TCPMSS: bad length (40 bytes)
xt_TCPMSS: bad length (40 bytes)
xt_TCPMSS: bad length (40 bytes)
root@Gargoyle:~#

mix
Posts: 292
Joined: Sun Feb 27, 2011 11:18 am

Re: Version 1.5.2 & 1.4.5

Post by mix »

I think the real error message is the failed to stop dma error which is so common on Atheros devices.
WRT54GL v1.1
Gargoyle 1.4.7

cosmo1t
Posts: 3
Joined: Sat Sep 10, 2011 1:22 pm

Re: Version 1.5.2 & 1.4.5

Post by cosmo1t »

wndr3700 no ext root, running 1.5.1
sysupgrade to 1.5.2

bricked.

had to tftp img file to it to get it up and running again

Dragon31337
Posts: 16
Joined: Sun Oct 30, 2011 10:14 am

Re: Version 1.5.2 & 1.4.5

Post by Dragon31337 »

I can't find TOR settings in 1.5.2 on my TPLINK 1043. =( WHY? It was there on 1.5.1.
TL-WR1043ND v1.8 - Gargoyle 1.5.8

Draak
Posts: 8
Joined: Thu Dec 29, 2011 4:52 pm

Re: Version 1.5.2 & 1.4.5

Post by Draak »

That's because "Tor is disabled on routers with less than 64MB of memory" for 1.5.2 and your has only 32MB.
Gargoyle 1.9.1 on Netgear WNDR3800

hnl_dk
Moderator
Posts: 408
Joined: Mon Aug 29, 2011 12:37 pm

Re: Version 1.5.2 & 1.4.5

Post by hnl_dk »

Dragon31337 wrote:I can't find TOR settings in 1.5.2 on my TPLINK 1043. =( WHY? It was there on 1.5.1.
There is not enough memory in the router... it should not have been enabled in 1.5.1. on your router.
If you wish, use a SWAP partition on a USB disc, then you should get enough memory to be able to enable TOR.
Router: TL-WR1043ND - Gargoyle 1.5.4
AP: TL-WR1043ND - Gargoyle 1.5.4

ispyisail
Moderator
Posts: 5180
Joined: Mon Apr 06, 2009 3:15 am
Location: New Zealand

Re: Version 1.5.2 & 1.4.5

Post by ispyisail »

If you wish, use a SWAP partition on a USB disc, then you should get enough memory to be able to enable TOR.
True

works well

Dragon31337
Posts: 16
Joined: Sun Oct 30, 2011 10:14 am

Re: Version 1.5.2 & 1.4.5

Post by Dragon31337 »

SO if I plug in an USB and make a swap file there - I'll get TOR options in the web admin?
TL-WR1043ND v1.8 - Gargoyle 1.5.8

hnl_dk
Moderator
Posts: 408
Joined: Mon Aug 29, 2011 12:37 pm

Re: Version 1.5.2 & 1.4.5

Post by hnl_dk »

Dragon31337 wrote:SO if I plug in an USB and make a swap file there - I'll get TOR options in the web admin?
Yes, if you make a SWAP partition on a flashkey or something like it, then you will be able to enable TOR.
Check this thread: http://www.gargoyle-router.com/phpbb/vi ... 9877#p9877
Router: TL-WR1043ND - Gargoyle 1.5.4
AP: TL-WR1043ND - Gargoyle 1.5.4

Post Reply