Version 1.5.2 & 1.4.5

[hnl_dk]

TL-WR1043ND V1.8?

yep, 1.8

Thx bro, could u keep update

1.8 is the hardware version of the router.
What hardware version do you have?

[hnl_dk]

Thank you Eric, I have just now made the upgrade.
http://www.gargoyle-router.com/phpbb/vi ... 9758#p9758

[frank604]

Working very well on my wndr3700v2. Had a strange wifi dropping connection on some devices on 1.5.1 but haven't had that happen yet on the 1.5.2

I hear that the final backfire 10.03.1 works great on this router as well. It has proven itself so far.

[lceron80]

sysupgrade went smoothly on my wndr3700v1
1. it reset my settings to defaults
2. i noticed more memory being used from around 22% to 27%

[hnl_dk]

sysupgrade went smoothly on my wndr3700v1
1. it reset my settings to defaults
2. i noticed more memory being used from around 22% to 27%

1. The upgrade script of Gargoyle erases the configuration automaticly, when you try to upgrade (the router even tells you, when you upgrade).
If you make this change, will you not loose the settings you have entered on the website (except the devicename): http://www.gargoyle-router.com/phpbb/vi ... f=7&t=2042
But always remember to make a backup of your settings.
2. If it is 1.5.2 that you are trying, could it be Tor... You can try to disable it in the Connection submenu.

[lceron80]

thanks for the sysupgrade info on the defaulting(did not know that). i don't have Tor enabled so maybe it is some new features that are taking up space in the memory. Tor takes up way more memory in my 3700. i have enabled it in the previous build just for testing but disabled it because of the memory hogging. anyway thanks for the great firmware and responses to my comments. this gets better and better with every release...

[damkov]

I've upgraded WR1043ND v1.8 from 1.4.1 to 1.5.2 without problems. Router is up & running like a charm. I wonder where are to options to enable swap & tor? I haven't found them in the web GUI..?? Before upgrade I've made "Reset to default configuration" using GUI.

I have two Ext4 partitions (one for swap) on external USB drive. I've enabled 128MB swap file using CLI on partition sda1:

Code: Select all

# dd if=/dev/zero of=/tmp/usb_mount/dev_sda1/swap count=131072
# mkswap /tmp/usb_mount/dev_sda1/swap
# swapon /tmp/usb_mount/dev_sda1/swap

After that a new text "Virtual memory" is displayed in GUI status page. But when the router reboots swap partition is no longer enabled - I have to enable it with "swapon" command.

How to enable swap automatically??

Thanks & happy 2012!!

[hnl_dk]

...
How to enable swap automatically??

I think it is only going to work, if you make a SWAP partition on your HDD, instead of a SWAP file.

[ispyisail]

I've upgraded WR1043ND v1.8 from 1.4.1 to 1.5.2 without problems. Router is up & running like a charm. I wonder where are to options to enable swap & tor? I haven't found them in the web GUI..?? Before upgrade I've made "Reset to default configuration" using GUI.

I have two Ext4 partitions (one for swap) on external USB drive. I've enabled 128MB swap file using CLI on partition sda1:

Code: Select all

# dd if=/dev/zero of=/tmp/usb_mount/dev_sda1/swap count=131072
# mkswap /tmp/usb_mount/dev_sda1/swap
# swapon /tmp/usb_mount/dev_sda1/swap

After that a new text "Virtual memory" is displayed in GUI status page. But when the router reboots swap partition is no longer enabled - I have to enable it with "swapon" command.

How to enable swap automatically??

Thanks & happy 2012!!

Mine auto loads fine

http://www.gargoyle-router.com/wiki/dok ... =swap_file

no need to manually run

Code: Select all

# dd if=/dev/zero of=/tmp/usb_mount/dev_sda1/swap count=131072
# mkswap /tmp/usb_mount/dev_sda1/swap
# swapon /tmp/usb_mount/dev_sda1/swap

[jaykumar2001]

Does this release fixes issue with no config save for Dlink DIR-300 routers?

http://www.gargoyle-router.com/phpbb/vi ... f=6&t=1273

http://www.gargoyle-router.com/phpbb/vi ... f=6&t=1305