Version 1.4.1

[DoesItMatter]

Running on a D-Link DIR-601 A1

Upgraded from 1.4.0

No stability issues - solid connection here.

[hellbound1988]

open dns ddns is working ? I m using TL-WR941ND

[mrg666]

My TEW-652BRP V1.2 is happy with 1.4.1. I have restored the settings from 1.4.0 backup. WiFi connection is reliable. Thanks!

[TeOS]

Thanks for the awesome firmware!

I have a small bug to report. On the Firewall->QoS(Upload/Download) the Save Settings doesn't work.

Router: WNDR3700
Browsers: Chrome, Firefox, IE
OS: Windows 7

[raiko]

Thanks for the awesome firmware!

I have a small bug to report. On the Firmware->QoS(Upload/Download) the Save Settings doesn't work.

Router: WNDR3700
Browsers: Chrome, Firefox, IE
OS: Windows 7

I have the same issue with TL-WR1043ND.

[rt_rex]

Thanks for the awesome firmware!

I have a small bug to report. On the Firmware->QoS(Upload/Download) the Save Settings doesn't work.

Router: WNDR3700
Browsers: Chrome, Firefox, IE
OS: Windows 7

Same with fonera 2100

[mtsblogs]

No Wireless on WRT54GL.

Brand new unit, just arrived with Cisco firmware.

I upgraded to 1.4.1, all went OK.
Set it all up, with Wifi, WPA2, quotas, etc.
Works ok.

Saved the config file.

Took a second brand new router, with Cisco.
Upgraded to 1.4.1.
Used config file to restore (to the same settings for both)
Bang, no wifi. It says its enabled, but Cisco Logo is not lit and no WiFi network. Tried EVERYTHING i could possible think of.

Decided to reflash again, setup everything again maually like the first router - all works, WiFi comes on as required.


Then I decided to be clever and restored from the same file again. Wifi new settings picked up (IP changed for clients), but upon hard reboot - no wifi again.

[k1nd]

Router: TP-LINK TL-WR1043ND ver1.7
Config restored from backup? NO
Issue:
changes made to Connection > DHCP are not saved (stock on saving spinner)

Other than that, it works nicely!
Thank you for this great piece of software!

[mtsblogs]

My saga continues.
It seems that 1.4.1 just does not work with WRT54GLS, even without restore, as after the reboot WiFi would not come on, other times even LAN is not picked up. At that point i've changed to 192.168.10.x, added dns servers, WiFi is channel 5 with WPA2, quota and time zone are setup, as well as remote http access on 8080

I can email you my backup settings if it helps.

I rolled back to 1.3.9, known good version for my tasks and all three new routers are working perfectly, restored from 1.3.9 backup files.


Please do not think that I expect it to work or having a go, what you do is great and these two posts are for benefit of others if anything.

[NGowner]

I've noticed since 1.4.0 that the web monitoring list is empty, despite it being turned on for monitoring. Is anyone else seeing this, too?

I have it set to monitor a range of IP addresses (192.168.1.130-192.168.1.169). Although I have IP addresses assigned in that range, and I know they are accessing the WAN, nothing is showing up in the list.

[NG]Owner