Page 10 of 18

Re: Version 1.11.0 : Based on OpenWrt 18.06

Posted: Wed Mar 13, 2019 3:38 am
by Lantis
No, your data has become corrupted. Or at least, that's typically what has occurred.

Re: Version 1.11.0 : Based on OpenWrt 18.06

Posted: Fri Mar 15, 2019 7:34 pm
by ghorvath
Thanks for this version! I successfully updated 1.11.X RC5 on a Youku YK1.

There is a new issue with the wireless (don't remember having it for RC5, didn't test for that, though). If I copy some big files through wireless from one local machine to another local machine, then after some undeterministic time (usually seconds, could be hours) two things happen: wireless breaks (machines connecting via wireless will keep the wireless connection, but won't see any other local machine, not even the router) and the router is not distributing the internet to any of the local machines, anymore (no matter if they connected via cable or wireless). Those machines that are connected to the router by cable can see each other and the router, so I can use one to login into the router and reboot it, which usually solves the issue until the next wireless bulk transfer. Sometimes multiple reboots are needed.

Did anyone experience a similar issue? Should I give some more specifics about my router/setup to help debugging this issue? If yes, then what?

Thanks!

Re: Version 1.11.0 : Based on OpenWrt 18.06

Posted: Fri Mar 15, 2019 8:27 pm
by RomanHK
Lantis wrote:
lesbinary wrote: "About" page shows "2008-2016" instead of "2008-2019"
Thanks, this is fixed in the code for future versions
I've found one historical site yet, can you fix it?
https://www.gargoyle-router.com/about.php

Thank you in advance.

Re: Version 1.11.0 : Based on OpenWrt 18.06

Posted: Fri Mar 15, 2019 9:05 pm
by Lantis
No I can’t

Re: Version 1.11.0 : Based on OpenWrt 18.06

Posted: Fri Mar 15, 2019 10:21 pm
by snake218
Reinstalled clean version of v1.11.0 and still getting "broken" intermittent wifi connection after a couple of hours. Getting the same problem with RC5. Had to revert to 1.10.0. Archer C7 v2.

Re: Version 1.11.0 : Based on OpenWrt 18.06

Posted: Sat Mar 16, 2019 7:45 am
by RomanHK
snake218 wrote:Reinstalled clean version of v1.11.0 and still getting "broken" intermittent wifi connection after a couple of hours. Getting the same problem with RC5. Had to revert to 1.10.0. Archer C7 v2.
Can you better describe how it behaves? is it just a problem in WiFi or even LAN? You may have the same problem as me:
viewtopic.php?f=14&t=11829&start=110#p51805

Re: Version 1.11.0 : Based on OpenWrt 18.06

Posted: Sat Mar 16, 2019 3:45 pm
by ispyisail
snake218 wrote:Reinstalled clean version of v1.11.0 and still getting "broken" intermittent wifi connection after a couple of hours. Getting the same problem with RC5. Had to revert to 1.10.0. Archer C7 v2.
Did you "preserve settings" or use a "back up file" on upgrade?

Re: Version 1.11.0 : Based on OpenWrt 18.06

Posted: Sat Mar 16, 2019 4:21 pm
by RomanHK
ispyisail wrote:
snake218 wrote:Reinstalled clean version of v1.11.0 and still getting "broken" intermittent wifi connection after a couple of hours. Getting the same problem with RC5. Had to revert to 1.10.0. Archer C7 v2.
Did you "preserve settings" or use a "back up file" on upgrade?
+1

it also occurred to me. Before, he wrote that he had no problems.
1. Either used a backup file?
2. or only having a problem with WiFi?
3. or exceed 4096 connections?
They must specify the problem more closely.

Re: Version 1.11.0 : Based on OpenWrt 18.06

Posted: Sun Mar 17, 2019 7:29 am
by Renegade18
ispyisail wrote:
Renegade18 wrote:Sorry but now i see ... TL-WR941ND is not supported on 1.11.0 ?
correct, 4MB routers are too small now, 8MB are getting suspect also........
No any chance for version 1.11.0 on TL-WR941ND (small version with basic options) ?

Re: Version 1.11.0 : Based on OpenWrt 18.06

Posted: Sun Mar 17, 2019 3:06 pm
by snake218
RomanHK wrote:
ispyisail wrote:
snake218 wrote:Reinstalled clean version of v1.11.0 and still getting "broken" intermittent wifi connection after a couple of hours. Getting the same problem with RC5. Had to revert to 1.10.0. Archer C7 v2.
Did you "preserve settings" or use a "back up file" on upgrade?
+1

it also occurred to me. Before, he wrote that he had no problems.
1. Either used a backup file?
2. or only having a problem with WiFi?
3. or exceed 4096 connections?
They must specify the problem more closely.
1. Didn't preserve settings, no backup used.
2. Wifi signal is ok, but connection to the internet drops
3. Didn't touch that setting

my problem could be memory related? I recently upgrade my internet connection from 10mb to 30mb, a lot of clients connect simultaneously to my network(around 15-20 max 30 clients). The problem is not with the wifi signal, but the connection. Downgrade to 1.10.0 and experience same issue once. The only solution is reboot the router. The problem maybe related to 30mb connection like i said before. Any advice? Do i change connection limits setting?