Page 16 of 18
Re: Version 1.11.0 : Based on OpenWrt 18.06
Posted: Mon May 27, 2019 1:29 am
by ispyisail
Try it out
don't like it downgrade
Re: Version 1.11.0 : Based on OpenWrt 18.06
Posted: Mon Jun 10, 2019 2:12 am
by ViBE
i noticed something, not sure it is a bug or not. if i remotely try to check out DLNA status the interface redirects me to the local area. for example:
Code: Select all
mygargoyleddns.address.com/minidlna.sh
then click on DLNA status button
is this a normal behaviour?
Re: Version 1.11.0 : Based on OpenWrt 18.06
Posted: Mon Jun 10, 2019 2:30 am
by Lantis
Not quite a bug, but not great behaviour either.
I've fixed it now, thanks for reporting.
https://github.com/ericpaulbishop/gargo ... b9eda962f0
Re: Version 1.11.0 : Based on OpenWrt 18.06
Posted: Mon Jun 10, 2019 2:45 am
by ViBE
Re: Version 1.11.0 : Based on OpenWrt 18.06
Posted: Sun Jul 07, 2019 12:47 pm
by joaomconde
after upgrading my archer c7 v2 from 10 to 11, i get broken 2.4ghz wireless. 5ghz works, ethernet works. 2.4ghz connected devices say connected but cant connect to the internet. any suggestions?
Re: Version 1.11.0 : Based on OpenWrt 18.06
Posted: Sun Jul 07, 2019 3:13 pm
by ispyisail
joaomconde wrote:after upgrading my archer c7 v2 from 10 to 11, i get broken 2.4ghz wireless. 5ghz works, ethernet works. 2.4ghz connected devices say connected but cant connect to the internet. any suggestions?
Gargoyle factory reset
you preserved setting on upgrade or used a backup file?
Re: Version 1.11.0 : Based on OpenWrt 18.06
Posted: Mon Jul 08, 2019 3:10 pm
by joaomconde
ispyisail wrote:
Gargoyle factory reset
you preserved setting on upgrade or used a backup file?
No preserved setting, no backup file used. Already factory reset, same problem.. ive tried everything, am out of ideas, any help would be greatly appreciated
Re: Version 1.11.0 : Based on OpenWrt 18.06
Posted: Mon Jul 08, 2019 3:15 pm
by ispyisail
joaomconde wrote:ispyisail wrote:
Gargoyle factory reset
you preserved setting on upgrade or used a backup file?
No preserved setting, no backup file used. Already factory reset, same problem.. ive tried everything, am out of ideas, any help would be greatly appreciated
try
viewtopic.php?f=14&t=12065
or
go back to 1.10 to confirm the problem is with 1.11 and not something else?
Re: Version 1.11.0 : Based on OpenWrt 18.06
Posted: Thu Jul 11, 2019 12:19 am
by skaox
Hi,
I have a tl-wr1043nd v1 and I've tried the 1.11.0 (February 2019) and 1.11.X (July 2019) version.
Device Configuration (Gateway) - Internet / WAN (Static IP Wireless) - Wireless Mode (Client).
Just want to report two problems I have with both versions :
System -> USB Storage -> Use Disk As External Root (Extroot)
After reboot no more wireless until I disable Extroot.
Connection -> Ping Watchdog -> Action : Reboot
If I powerdown the internet box no reboot and gargoyle gui (uhttpd) is completely bugged.
That's all for the moment ; A big THANK YOU for this new version.
Re: Version 1.11.0 : Based on OpenWrt 18.06
Posted: Sat Jul 13, 2019 7:58 am
by romain
Hi all,
I recently upgraded to 1.11.0 from rc4 and the only issue I had is that it turned on QoS as part of the upgrade. I was getting terrible speeds compared to rc4 (100x to 150x speed loss) which were thankfully solved by just disabling both QoS features.
I have no use for those anyways.
Thanks for the hard work !