Page 8 of 18
Re: Version 1.10.0 : New stable version with critical security fixes
Posted: Fri Nov 03, 2017 1:50 pm
by lucianor
The curl package dependency seems to be broken - not sure if related to the upgrade:
Code: Select all
root@Gargoyle:/usr/sbin# opkg update
Downloading package list for chaos_calmer_base source...
Package list for chaos_calmer_base downloaded successfully.
Downloading package list for gargoyle source...
Package list for gargoyle downloaded successfully.
Downloading package list for chaos_calmer_packages source...
Package list for chaos_calmer_packages downloaded successfully.
Downloading package list for chaos_calmer_telephony source...
Package list for chaos_calmer_telephony downloaded successfully.
Downloading package list for chaos_calmer_routing source...
Package list for chaos_calmer_routing downloaded successfully.
Downloading package list for chaos_calmer_management source...
Package list for chaos_calmer_management downloaded successfully.
root@Gargoyle:/usr/sbin# opkg install curl
ERROR: Dependency libpolarssl of package curl cannot be found, try updating your package lists
Re: Version 1.10.0 : New stable version with critical security fixes
Posted: Fri Nov 03, 2017 2:23 pm
by ispyisail
mine work on my C7, out of space?
Code: Select all
root@Gargoyle:~# opkg install curl
Preparing to install the following packages, which will require 136096 bytes:
curl, libcurl
Preparing to install package libcurl...
Downloading...
Downloaded libcurl successfully.
Installing libcurl...
Successfully installed libcurl.
Preparing to install package curl...
Downloading...
Downloaded curl successfully.
Installing curl...
Successfully installed curl.
Installation of packages successful.
root@Gargoyle:~#
Re: Version 1.10.0 : New stable version with critical security fixes
Posted: Sat Nov 04, 2017 3:38 pm
by themadsens
Thanks @ispyisail, that fixed it. I had to rig a serial port though to issue the 'firstboot' command
ispyisail wrote:I've had the same problem
failsafe / refalsh will fix the problem
If you are quick you should able to reset via GUI
Re: Version 1.10.0 : New stable version with critical security fixes
Posted: Sat Nov 04, 2017 4:51 pm
by ispyisail
Yeah...
Tip: Don't rush configuring your router. My hypothesis is clicking on Gargoyle UI screens or buttons before a previous process has finished can corrupt the gargoyle config requireing a re-flash or reset.
themadsens wrote:Thanks @ispyisail, that fixed it. I had to rig a serial port though to issue the 'firstboot' command
ispyisail wrote:I've had the same problem
failsafe / refalsh will fix the problem
If you are quick you should able to reset via GUI
Re: Version 1.10.0 : New stable version with critical security fixes
Posted: Tue Nov 07, 2017 6:40 pm
by arthng
Thanks for the update.
Upgraded wndr3700v4 and all is good.
Is the GUI snappier or am i imagining things?
Re: Version 1.10.0 : New stable version with critical security fixes
Posted: Wed Nov 08, 2017 9:03 am
by Cornholio
All good here.
Thanks for the update.
Re: Version 1.10.0 : New stable version with critical security fixes
Posted: Sat Nov 11, 2017 1:12 pm
by Naevus
vladtheodor wrote:No problems till now (1.10.0)
What's the secret?
When I try to flash sysupgrade (1043в1), the router hangs on the update and does nothing. If I restart the browser - everything stays on the old (1.9.2) firmware.
I try 3 various brousers.
Re: Version 1.10.0 : New stable version with critical security fixes
Posted: Sun Nov 12, 2017 1:46 pm
by kaminkehrer
Hello,
Thank you very much!
Works fine, as expected on my TP-Link WR1043ND v1.8
.
I use my TP-Link WR1043ND as WLAN AccessPoint.
Kind Regards
kaminkehrer
Re: Version 1.10.0 : New stable version with critical security fixes
Posted: Sun Nov 12, 2017 5:46 pm
by uysiquebien
TL-WR741ND v4 successfully upgraded, settings retained, everything OK. Thanks for your work.
Re: Version 1.10.0 : New stable version with critical security fixes
Posted: Sun Nov 12, 2017 9:21 pm
by snake218
Just updated C7 V2 with "preserve settings". all working, so far. 5gh and 40 MHZ bandwith, with previous modification of region and no scan option.
Or is a clean install recommended?