Version 1.12.0 : New stable version

The latest news about Gargoyle

Moderator: Moderators

RomanHK
Posts: 644
Joined: Sat May 04, 2013 4:18 pm
Location: Czech Republik

Re: Version 1.12.0 : New stable version

Post by RomanHK »

SirWeazel wrote:
Sun Apr 19, 2020 2:06 pm
I've looked for the newer iSpyiSail's builds, but I didn't see any newer 1.12 versions. Maybe I'm looking in the wrong place. I've used them before, but all I see is everything built for 1.11 in 2019. I looked in the forums, but I could just be having a "moment" and missing the obvious. Thanks for your help. Everyone here is doing work!
Here: viewtopic.php?f=14&t=12339 ;)
Turris Omnia with Gargoyle 1.12.0
Linksys WRT3200ACM with Gargoyle 1.12.0
TL-WR1043ND v2 with Gargoyle 1.10.0

SirWeazel
Posts: 7
Joined: Sat Feb 24, 2018 11:55 pm

Re: Version 1.12.0 : New stable version

Post by SirWeazel »

Thank you.

ViBE
Posts: 154
Joined: Sun Apr 19, 2015 6:58 pm

Re: Version 1.12.0 : New stable version

Post by ViBE »

if i try to install the USB Printer Support the router cannot do it. the log says:
Sat Jun 6 16:30:23 2020 daemon.err uhttpd[6647]: ERROR: Dependency kmod-usb-printer of package plugin-gargoyle-usb-printer cannot be found, try updating your package lists
it happens on my Xiaomi Mi Router 3G.

Lantis
Moderator
Posts: 5624
Joined: Mon Jan 05, 2015 5:33 am
Location: Australia

Re: Version 1.12.0 : New stable version

Post by Lantis »

ViBE wrote:
Sat Jun 06, 2020 10:36 am
if i try to install the USB Printer Support the router cannot do it. the log says:
Sat Jun 6 16:30:23 2020 daemon.err uhttpd[6647]: ERROR: Dependency kmod-usb-printer of package plugin-gargoyle-usb-printer cannot be found, try updating your package lists
it happens on my Xiaomi Mi Router 3G.
Change the OpenWrt sources to https in /etc/opkg.conf
http://lantisproject.com/downloads/gargoyle_ispyisail.php for the latest releases
Please be respectful when posting. I do this in my free time on a volunteer basis.

ViBE
Posts: 154
Joined: Sun Apr 19, 2015 6:58 pm

Re: Version 1.12.0 : New stable version

Post by ViBE »

Lantis wrote:
Sat Jun 06, 2020 7:02 pm
ViBE wrote:
Sat Jun 06, 2020 10:36 am
if i try to install the USB Printer Support the router cannot do it. the log says:
Sat Jun 6 16:30:23 2020 daemon.err uhttpd[6647]: ERROR: Dependency kmod-usb-printer of package plugin-gargoyle-usb-printer cannot be found, try updating your package lists
it happens on my Xiaomi Mi Router 3G.
Change the OpenWrt sources to https in /etc/opkg.conf
still not working :/

zarubkin_as
Posts: 1
Joined: Thu Jul 23, 2020 8:10 am

Re: Version 1.12.0 : New stable version

Post by zarubkin_as »

I have an issue with upgrading from 1.11.0 to 1.12.0 on my TP-Link tl842n v1 router. I downloaded a sysupgrade.bin file for my model, renamed it to "sysupgrade.bin", and tried to update via GUI without preserving settings.

The router rebooted after a while, but all my settings were in place and the reported firmware version is still 1.11.0. Did anyone encounter this issue? How would I upgrade the firmware properly?

RomanHK
Posts: 644
Joined: Sat May 04, 2013 4:18 pm
Location: Czech Republik

Re: Version 1.12.0 : New stable version

Post by RomanHK »

zarubkin_as wrote:
Thu Jul 23, 2020 8:13 am
I have an issue with upgrading from 1.11.0 to 1.12.0 on my TP-Link tl842n v1 router. I downloaded a sysupgrade.bin file for my model, renamed it to "sysupgrade.bin", and tried to update via GUI without preserving settings.

The router rebooted after a while, but all my settings were in place and the reported firmware version is still 1.11.0. Did anyone encounter this issue? How would I upgrade the firmware properly?
This may be due to insufficient RAM.
1. Clear all settings.
2. Download this Gargoyle (1.12.0) firmware: https://www.gargoyle-router.com/downloa ... pgrade.bin
3. Upload the new firmware.

P.S. Do not connect any USB device. This is to disable the start of USB support services and daemons.
Turris Omnia with Gargoyle 1.12.0
Linksys WRT3200ACM with Gargoyle 1.12.0
TL-WR1043ND v2 with Gargoyle 1.10.0

teray0n
Posts: 1
Joined: Fri Jul 24, 2020 9:25 am

Re: Version 1.12.0 : New stable version

Post by teray0n »

Hey i have stumbled upon your firmware which i enjoy very much. However it would be awesome to see this kept up to date with more plugins and updated kernel. I like your gui setup very much and the ease of use. I would like to see more channel numbers for 2.4/5G wifi for use in north america.
But other then these things great work. Good luck on bringing this firmware to the forefront its worth the time to persue.

cheer's

Post Reply