WRT Series Switch Boot partition from SSH
Moderator: Moderators
WRT Series Switch Boot partition from SSH
Are there equivalent Gargoyle commands to the Openwrt ones to tell the router to boot into the alternate partition on reboot instead of doing the 3xswitch on ?
Re: WRT Series Switch Boot partition from SSH
I assume this is specific to the wrt1x00ac/s series?
If it works on openwrt it should work here.
Can you please refresh my memory on the particular commands?
If it works on openwrt it should work here.
Can you please refresh my memory on the particular commands?
http://lantisproject.com/downloads/gargoyle_ispyisail.php for the latest releases
Please be respectful when posting. I do this in my free time on a volunteer basis.
Please be respectful when posting. I do this in my free time on a volunteer basis.
Re: WRT Series Switch Boot partition from SSH
the commands are fw_printenv boot_part (th check which parition is active) and fw_setenv boot_part to set the partition to boot into - they weren't working for me yesterday when I was having problems loading dd-wrt on one of the partitions. Have reflashed gargoyle to both partitions this evening and the commands now work again.