Gargoyle Forum

USE AT YOUR OWN RISK

gargoyle-ispy 2016-May-12 09:22.torrent
https://goo.gl/Yo1gyK

magnet:?xt=urn:btih:08a23dc52cb75d8a91c4ca7cd96dd5c2264c773c&dn=gargoyle-ispy%202016-May-12%2009_22.7z&tr=udp%3a%2f%2ftracker.openbittorrent.com%3a80&tr=udp%3a%2f%2fopen.demonii.com%3a1337&tr=udp%3a%2f%2ftracker.coppersurfer.tk%3a6969&tr=udp%3a%2f%2ftracker.leechers-paradise.org%3a6969

Routers
https://goo.gl/TPH2VN


revert latest updates to IMQ patch, they are consistently causing kernel crashes for simple quota QoS rules


in IMQ, we can safely move definition of destructor as suggested in patch, but removal of else clause that is part of that patch is clearly a serious problem, so add back just the part of the patch that updates the destructor definition earlier than before

This should fix quotas which limited speed without using QOS. Should no longer crash

I tried these builds a few months back and ran into a few issues (one 1043ND bricked - now given to a friend who will try his hand at flashing via serial) but a quick read says that people are finding these newer builds OK.

I was wondering if anyone had any experience with the TP-Link TL-WR842ND v2.3? I've got one here and I see that there isn't supported by official builds yet, and I'd like to give it a go since it's a reasonably affordable router with 8MB flash. I see that these builds are available though. Happy to wait if it's not quite stable yet though.

Lastly, thanks for all your hard work. Gargoyle has certainly revived a lot of my older routers.

I'll send you a PM. you are 100% correct that it should be supported.

i just got this regarding the ddns issues,


Sun May 15 23:16:30 2016 local5.info qosmon[8836]: starting socketfd = 5, statusfd = 4
Sun May 15 23:16:31 2016 user.info syslog: Successfully retrieved local ip from url: http://checkmyip.com
Sun May 15 23:16:31 2016 daemon.err uhttpd[1872]: Aborted
Sun May 15 23:16:31 2016 daemon.err uhttpd[1872]: cat: can't open '/var/last_ddns_updates/ddns_1': No such file or directory
Sun May 15 23:16:32 2016 daemon.info ddns_gargoyle[8895]: Forcing update:
Sun May 15 23:16:32 2016 daemon.info ddns_gargoyle[8895]: service provider=no-ip.com
Sun May 15 23:16:32 2016 daemon.info ddns_gargoyle[8895]: domain=wndr.no-ip.org
Sun May 15 23:16:32 2016 daemon.info ddns_gargoyle[8895]: Successfully retrieved local ip from url: http://checkmyip.com
Sun May 15 23:16:32 2016 daemon.info ddns_gargoyle[8895]: local IP = 172.91.2.131
Sun May 15 23:16:32 2016 daemon.info ddns_gargoyle[8895]: remote IP cannot be determined
Success

When you login to no-ip, is the correct ip shown?
I don't think that error matters

the ips do not match. so why does the ddns setup just causes a hanging after you save the settings after adding services...

Can you pm me your settings? I can't make it crash.
You don't have to share your password if you're uncomfortable with that. I just need to see what's different.

so far good results with is build.

Haven't tried all features though, just the basics

Router
ubnt rspro

I've confirmed an issue with DDNS causing an interface hang, but can't figure out why yet.