Gargoyle Forum

USE AT YOUR OWN RISK

gargoyle-ispy 2016-February-09 22:05.torrent
https://goo.gl/EF7VjM


magnet:?xt=urn:btih:16018385661a978c07f5f5921b1fe81e7bde4ab1&dn=gargoyle-ispy%202016-February-09%2022_05.7z&tr=udp%3a%2f%2ftracker.openbittorrent.com%3a80&tr=udp%3a%2f%2fopen.demonii.com%3a1337&tr=udp%3a%2f%2ftracker.coppersurfer.tk%3a6969&tr=udp%3a%2f%2ftracker.leechers-paradise.org%3a6969


Routers
https://goo.gl/E7woDT


Fix temperature display for WRT1900ACv2

Fix for populate network.wan.device for proto qmi|ncm

Remove Tor dependence on L7
This removes the dependence of Tor on L7 and solves the router stability
issues discussed in issue #427

ispyisail wrote:magnet:?xt=urn:btih:16018385661a978c07f5f5921b1fe81e7bde4ab1&dn=gargoyle-ispy%202016-February-09%2022_05.7z&tr=udp%3a%2f%2ftracker.openbittorrent.com%3a80&tr=udp%3a%2f%2fopen.demonii.com%3a1337&tr=udp%3a%2f%2ftracker.coppersurfer.tk%3a6969&tr=udp%3a%2f%2ftracker.leechers-paradise.org%3a6969

Perfect

finally!!
will try it

EDIT:
everything seems to work just fine on wr841n. thank you

Thanks for the new build.

Tests very good.

Default SSID has changed to 'OpenWrt'. I like 'Gargoyle' better

I still have problems with package kmod-usb-net-cdc-ether so I cannot get my Huawei E3372 hilink modem to work with TP-WDR3600.

ispyisail wrote:Remove Tor dependence on L7
This removes the dependence of Tor on L7 and solves the router stability
issues discussed in issue #427

BTW the L7 stability issue still impacts QoS+L7 rules discussed in the prior @ispyisail build

On my routers new build work well, only I can't setup country region to higher wifi channel - uci set wireless.@wifi-device[0].country=PL notting hapens - still I have only 9 channel to choice

n8b wrote: I still have problems with package kmod-usb-net-cdc-ether so I cannot get my Huawei E3372 hilink modem to work with TP-WDR3600.

Code: Select all

root@Gargoyle:~# gpkg install kmod-usb-net-cdc-ether --force-depends
ERROR: Dependency kernel (= 3.18.20-1-7bed08fa9c06eb8089e82c200340ec66) of package kmod-usb-net-cdc-ether is installed,
                but has incompatible version 3.18.23-1-223e3fdd27db9122f3c52a76cf3816a1 and is marked as 'hold'

Hi n8b,
this is the expected behavior, because this kernel module is not compiled and therefore not part of this version. If you want to implement this module right now, you have to compile Gargoyle by yourself.

yabba235 wrote:On my routers new build work well, only I can't setup country region to higher wifi channel - uci set wireless.@wifi-device[0].country=PL notting hapens - still I have only 9 channel to choice

Did you reboot the router after?

Can we load this with Preserve Settings? Currently have the Jan 25 version loaded.

jd45321 wrote:Can we load this with Preserve Settings? Currently have the Jan 25 version loaded.

Yes - I believe preserve setting will work OK from Jan25 to Feb09