gargoyle-ispy 2015-December-18 06:33.torrent

[ispyisail]

USE AT YOUR OWN RISK

gargoyle-ispy 2015-December-18 06:33.torrent
https://goo.gl/uhwFXp

Routers
https://goo.gl/xtHJBa

bump CC revision

add some updates to dev-utils that never got added back to the repo

Bump dosfstools to 3.0.28 and fix Makefile


Use "iwinfo" instead of "iwconfig"
on smaller devices we removed wireless tools which took away "iwconfig" and broke the hosts page on the GUI.
we still have "iw" and "iwinfo" available to us.
similar changes will need to be made for the madwifi case however i do not have any devices to play with.

Update overview.sh
Fix wireless status on overview due to removal of iwconfig.


Bug and cosmetic fixes
Fix for a bug that was pointed out by forum user charlie regarding file
permissions.

Wrong path fix

[tapper]

Thanks for the build flashed my wdr 3600 and all is ok.

[phgerin]

Is there a way to fix SNMPD reporting speed only every 15 secs ?

There is a discussion about this on the openwrt forum, but no solution : https://forum.openwrt.org/viewtopic.php?id=57007

mini-snmpd has not the problem but its not available in version 1.9.

This build seems ok on wdr3600

[Krog]

i test the strength of the wifi in the wdr3600 it sucks someone have notice that?

whit the lastest gargoyle firmwares 1.8.1 1.9

in the original firmware the wifi reach go far away whit gargoyle the far of the signal are a lame

that strage i have anothers router whit gargoyle and the signal are fine in terms of strength

[ispyisail]

i test the strength of the wifi in the wdr3600 it sucks someone have notice that?

whit the lastest gargoyle firmwares 1.8.1 1.9

in the original firmware the wifi reach go far away whit gargoyle the far of the signal are a lame

that strage i have anothers router whit gargoyle and the signal are fine in terms of strength

change channel?

[scrmtrey]

Range on WDR3600 is really poor, because the power of chip is low.

Old wr1043nd has superior range VS wdr3600.


But one thing you can do, is to change channel to 144 (5ghz) or higher (it has higher output power on the chip).

For 2.4ghz it is "ok".

[-KAPMA-]

Hello!
The same problem that I have described here
Only now even worse, I can not get access to the Internet at 941nd.
I understand the only problem I have? But why then all is well on the 1.8.0.
Thx!

[scrmtrey]

Just renew ip from modem (in gargoyle gui).

[nworbnhoj]

Hello!
The same problem that I have described here
Only now even worse, I can not get access to the Internet at 941nd.
I understand the only problem I have? But why then all is well on the 1.8.0.
Thx!

Odd! Bad cable maybe? or plugged into the disabled WAN port?

[-KAPMA-]

We are talking about Wi-Fi bridge
As I have said on version 1.8.0 it works, since 1.9.0+ no longer working.
I can then send any reports?
Let me know.