Page 2 of 3

Re: gargoyle-ispy 2015-November-18 08:37.torrent

Posted: Tue Nov 24, 2015 8:31 pm
by Lantis
https://github.com/lantis1008/gargoyle/ ... 1a19ecc917

Would love if someone would give this a look over and spot any mistakes.
If anyone wanted to give it a test that would be good too.

The main usage case i haven't been able to test is:
- single band wireless (no 5ghz)
- dual band wireless, without 802.11N on either band (does this exist?)


The configs that get written seem good, i didn't test bridge mode because people are still complaining that it isn't working properly anyway?

Re: gargoyle-ispy 2015-November-18 08:37.torrent

Posted: Wed Nov 25, 2015 3:58 am
by nworbnhoj
Lantis wrote:https://github.com/lantis1008/gargoyle/ ... 1a19ecc917
Thats a lotta code!
I scp these 3 files directly into my WDR3600 and I see
2.4GHz Disabled, B+G, B+G+N with 20MHz, 40MHz above & below
5GHz Disabled, A, A+N with 20MHz, 40MHz above & below
I ran some superficial tests on a variety of wifi combinations.
There were no overt failures :-)

Re: gargoyle-ispy 2015-November-18 08:37.torrent

Posted: Wed Nov 25, 2015 4:57 am
by ispyisail
when you are ready i'll push a build

Re: gargoyle-ispy 2015-November-18 08:37.torrent

Posted: Wed Nov 25, 2015 5:10 am
by Lantis
I have a HUGE presentation to make tomorrow, so maybe tomorrow afternoon I'll push it to Eric and let him take a look. If anyone will pick up on my stupidity it will be him lol.

Re: gargoyle-ispy 2015-November-18 08:37.torrent

Posted: Wed Nov 25, 2015 9:49 am
by ralhabsi
The build seems to run faster than 1.7.2.
I copied the 3 files to my WDR3600 router. There seems to be a bug. All the options are visible but once I reselect the options the page is displayed correctly. I will try to Restore Default Configuration later and see if the bug exists.

Wireless Bridge/Repeater options are visible
Image

Other connect via type options are visible
Image

Re: gargoyle-ispy 2015-November-18 08:37.torrent

Posted: Wed Nov 25, 2015 2:20 pm
by nworbnhoj
ralhabsi wrote:There seems to be a bug. All the options are visible but once I reselect the options the page is displayed correctly.
Probably because one of the new fields was not defined in your installation and it caused a browser error (try firefox - tools - webdeveloper - debugger). I saw a similar thing but I thought for a different reason (my copy error). It may be that a variable has not been initialised on properly on a new installation - or it may be be simply because we roughly inserted the files into a working installation and did not reboot

Re: gargoyle-ispy 2015-November-18 08:37.torrent

Posted: Wed Nov 25, 2015 3:32 pm
by Lantis
Yep that happens when one of the new variables isn't defined.
I'd suggest clear cache and reload.

Re: gargoyle-ispy 2015-November-18 08:37.torrent

Posted: Sat Nov 28, 2015 11:01 pm
by darkfibre
I've noticed a few people on here are running the WRT1900AC.
I have set up one with 1.9.0 (For someone else) and its running ok.
I will be doing some work on it shortly and have 2 questions.

1.9.0 or 1.9.x recomendations please.
And can a config from 1.9.0 go straight back into 1.9.x?

Thanks.

Re: gargoyle-ispy 2015-November-18 08:37.torrent

Posted: Sun Nov 29, 2015 12:21 am
by Lantis
configs are compatible.

i'd recommend my personal build available at http://lantisproject.com/gargoyle_mvebu/
which has the latest version of the wifi driver which is significantly more stable. It also includes the GUI changes discussed above.

Re: gargoyle-ispy 2015-November-18 08:37.torrent

Posted: Sun Nov 29, 2015 12:26 am
by darkfibre
Thanks for that... Will give it a go..

Safe to restore config from 1.9.0?