Gargoyle Forum

Lantis wrote:

b0xBR wrote:Installed this build today, running ok. The only bug i've found so far, the time is always UTC, 3 hours ahead of what i've configured (GMT-3). Anyway, thanks for the build.

Finally someone else notices!

The thing is even though you set the time it hasn't updated.
Did you try rebooting your router? that will probably fix it.
I know you can force the time to update by doing a "/etc/init.d/system restart"

yep, I used the command /usr/bin/set_kernel_timezone and fixed the time. Could you tell me if your cron is working properly? I'm trying to run znc at startup and it simply doesn`t load up. the command I'm using is /usr/bin/znc -r (yeah, I'm too lazy to run as normal user)

Cron works fine.

For running something at startup I'd use an init.d script instead.

Lantis wrote:Cron works fine.

For running something at startup I'd use an init.d script instead.

Yep, fixed init.d script and it's now working properly.

I found another bug: "Wireless Client Isolation" not work?.Extract the file is still the same after the restart (/var/run/hostapd_phy0.conf) and do not know if this is a good value: ap_isolate=1 (this value is still there)?

Im using this build on a TP-Link TL-WDR3600 V1.5 and i have noticed the web gui is slow at responding, Sometime it will timeout however 1.8.0 never used to do this.

Anyone eles notced?

francisuk1989 wrote:Im using this build on a TL-WDR3600 V1.5 and i have notced the web gui is slow at responding sometime it will timeout however 1.8.0 never used to do this.

Hi i have same router and web gui is nice and fast for me did you doo a cleen install?
If not may be try a firstboot.

tapper wrote:

francisuk1989 wrote:Im using this build on a TL-WDR3600 V1.5 and i have notced the web gui is slow at responding sometime it will timeout however 1.8.0 never used to do this.

Hi i have same router and web gui is nice and fast for me did you doo a cleen install?
If not may be try a firstboot.

When i went from 1.8.0 to this build just went into system > upgrade firmware then this builds firmware, Didnt do "Attempt to Preserve Settings"

Im going to try a firstboot later on as the kids are on there consoles.

Will report back later on.

i'm experiencing the slow ui as well. i don't think its a user error.

tapper wrote:try a firstboot.

Can confirm this is all working great, No slow GUI (As in the routers webpage)

+1 tapper

francisuk1989 wrote:

tapper wrote:try a firstboot.

Can confirm this is all working great, No slow GUI (As in the routers webpage)

+1 tapper

No probs mate