Page 30 of 33
Re: Adblock Plugin
Posted: Thu Sep 24, 2020 4:19 am
by Lantis
Right, which I would consider an old version as far as development goes.
Yes there hasn't been any official releases, but there is plenty of community releases.
Re: Adblock Plugin
Posted: Sat Oct 03, 2020 10:44 am
by morglum
Lantis wrote: ↑Sat May 30, 2020 8:06 pm
Because the list you're looking to add is relatively small (10-15 addresses ) you can just add them manually in the GUI to the blacklist. This will automatically include them with all other ad sites it loads during regular operation.
There's only 3 sections in the GUI, block, black and white. Hopefully that clarifies.
Thanks for the reply !
I'm not sure where in the GUI the block/black/white lists are.
I've looked in Firewall/Adblock and System/Plugins
(sorry for super delay, this is stuff I do on out-of-town family computer) so I just got back to it.)
Re: Adblock Plugin
Posted: Sat Oct 03, 2020 11:36 am
by morglum
morglum wrote: ↑Sat Oct 03, 2020 10:44 am
Lantis wrote: ↑Sat May 30, 2020 8:06 pm
Because the list you're looking to add is relatively small (10-15 addresses ) you can just add them manually in the GUI to the blacklist. This will automatically include them with all other ad sites it loads during regular operation.
There's only 3 sections in the GUI, block, black and white. Hopefully that clarifies.
Thanks for the reply !
I'm not sure where in the GUI the block/black/white lists are.
I've looked in Firewall/Adblock and System/Plugins
(sorry for super delay, this is stuff I do on out-of-town family computer) so I just got back to it.)
never mind, I was using an old version of gargoyle. after updating the firmware I can see the lists in firewall/adblock
Re: Adblock Plugin
Posted: Sat Oct 03, 2020 11:58 am
by morglum
edit: the plugin doesnt work for me.
I have a WDR3600 v1.5
I have installed the plugin, enabled the plugin, updated the blocklist, saved the settings and rebooted the modem.
then I visit the test page in incognito mode and I see the ads from
www.googleadservices.com
troubleshooting:
I have only 672Kb free according to the GUI: "Root Drive 960.000 kBytes Total, 672.000 kBytes Free"
I don't have any files named /etc/block.hosts
here is my available space (not much)
root@Gargoyle:/# df -h
Filesystem Size Used Available Use% Mounted on
/dev/root 5.5M 5.5M 0 100% /rom
tmpfs 61.1M 212.0K 60.9M 0% /tmp
/dev/mtdblock3 960.0K 288.0K 672.0K 30% /overlay
overlayfs:/overlay 960.0K 288.0K 672.0K 30% /
tmpfs 512.0K 0 512.0K 0% /dev
any help would be greatly appreciated.
cheers
Re: Adblock Plugin
Posted: Sat Oct 03, 2020 4:30 pm
by RomanHK
You may need to make manual corrections according to my post:
viewtopic.php?p=57172#p57172
Re: Adblock Plugin
Posted: Tue Oct 06, 2020 5:51 am
by lollapalooza
morglum wrote: ↑Sat Oct 03, 2020 11:58 am
troubleshooting:
I have only 672Kb free according to the GUI: "Root Drive 960.000 kBytes Total, 672.000 kBytes Free"
I don't have any files named /etc/block.hosts
As of now, the block.hosts file is about 480 K in size.
File is located in /plugin_root/adblock/
As RomanHK also said, you might try editing the
/usr/lib/adblock/runadblock.sh file.
You need to replace line 105 and 106 with the following ones:
Code: Select all
wget -qO- --no-check-certificate https://winhelp2002.mvps.org/hosts.txt| awk -v r="$ENDPOINT_IP4" '{sub(/^0.0.0.0/, r)} $0 ~ "^"r' > /tmp/block.build.list
wget -qO- --no-check-certificate "https://adaway.org/hosts.txt"|awk -v r="$ENDPOINT_IP4" '{sub(/^127.0.0.1/, r)} $0 ~ "^"r' >> /tmp/block.build.list
Re: Adblock Plugin
Posted: Tue Oct 13, 2020 4:53 pm
by morglum
block.hosts was empty, but replacing lines 105 and 106 and running "update lists" filled it.
thanks!!
Re: Adblock Plugin
Posted: Tue Jan 26, 2021 9:46 pm
by taz-kun
How do I make it work? I install it but it doesn't block the ads.
Re: Adblock Plugin
Posted: Wed Jan 27, 2021 12:50 am
by taz-kun
dnsmasq without leasing, failing.
It is normal?
Re: Adblock Plugin
Posted: Wed Jan 27, 2021 4:00 am
by lollapalooza
taz-kun wrote: ↑Tue Jan 26, 2021 9:46 pm
How do I make it work? I install it but it doesn't block the ads.
You have to enable it and then update the list.
If it still does not work, check previous messages in this thread.