gargoyle-ispy 2015-April-20 05:38.torrent

Want to share your OpenWrt / Gargoyle knowledge? Implemented a new feature? Let us know here.

Moderator: Moderators

nworbnhoj
Posts: 916
Joined: Mon Jul 21, 2014 10:08 am
Location: Australia
Contact:

Re: gargoyle-ispy 2015-April-20 05:38.torrent

Post by nworbnhoj »

Thanks djt_nz :-)
euwdr3600 wrote:Flash this one from March-26 build without preserving settings on my Tl-WDR3600. So far so good!
Great! But why did I get such a different result (above)? :?
  • I started with Gargoyle 1.6.2 on my TL-WDR3600-v1.5
  • flashed over ethernet (not preserve settings) with gargoyle_1.7.x-ar71xx-generic-tl-wdr3600-v1-squashfs-sysupgrade from ispyisail (above)
  • set password & timezone
  • could not set up 3G WAN connection (above)
Weird - maybe I will have another try....

[UPDATE] Nope :-( same result. And getting back to 1.6.2 has been a bit of a mission (flash OK; pwd & timezone OK; load settings -> brick; manual config OK)
Can you help someone else get Gargoyle up and running?
TL-WDR3600 : Gargoyle 1.9.0 : NBN FixedWireless
TL-WR1043ND-V2 : Gargoyle 1.8.0 : 3G Huawei E160E

scrmtrey
Posts: 102
Joined: Wed May 14, 2014 2:25 am

Re: gargoyle-ispy 2015-April-20 05:38.torrent

Post by scrmtrey »

You should go back to stock first. Than to 1.7.x.
wdr3600 v1.5 @ Latest ispyisail build

doug_porsche
Posts: 75
Joined: Fri Aug 16, 2013 3:59 pm

Re: gargoyle-ispy 2015-April-20 05:38.torrent

Post by doug_porsche »

Updated, preserving settings from 1.7.x -> this release.
up for two days, no issues!

Thanks
NETGEAR WNDR3700v4 or an old Soup can with string. So hard to tell these days.

pmerrill
Posts: 290
Joined: Wed Feb 15, 2012 8:23 pm

Re: gargoyle-ispy 2015-April-20 05:38.torrent

Post by pmerrill »

What's the main benefits between the latest release and 1.6.2? 1.6.2 has been performing nicely for me except for a couple of minor points:
> Range is ok but I think it's better with stock
> Getting dual channel n to work seems to be troublesome. I can get some of my devices to connect at 270mbits on stock but can't seem to get more than 70-135 mbits on Gargoyle

Going back to stock is not an option because the stock firewall is crap and gargoyle's is excellent. I can't even set up the rules I have with stock and they are not that complicated.

I'm running a TP-Link TL-WDR4300 v1.
Paul
Gargoyle 1.11.x on TP-Link Archer C7 V2 H/W

marrco
Posts: 47
Joined: Fri Dec 26, 2014 1:00 pm

Re: gargoyle-ispy 2015-April-20 05:38.torrent

Post by marrco »

looking though the logs i found one small error: Tue Apr 21 09:25:37 2015 kern.err kernel: [57838.290000] overlayfs: ERROR - failed to whiteout 'S85webmon_gargoyle'

and ik'm still not 100% sure plugins work fine. I had to reflash and re-install because first time one plugin didn't register, and connecting via ssh i found some issues. When i installed plugins in a different order everything worked fine, so i'll do more testing here.

Evzen
Posts: 16
Joined: Tue Mar 10, 2015 7:03 pm

Re: gargoyle-ispy 2015-April-20 05:38.torrent

Post by Evzen »

Flashed from stock to TP-Link TL-WDR4300 v1, but even after disabling bwmon, no way to get full speed on my 240Mbit cable...
I get 170Mbit max.

Barrier Breaker is definitely a dead-end for highspeed lines :(
UPC broadband 240/20 Mbit
TP-LINK TL-WDR4300 v1.7

ispyisail
Moderator
Posts: 5180
Joined: Mon Apr 06, 2009 3:15 am
Location: New Zealand

Re: gargoyle-ispy 2015-April-20 05:38.torrent

Post by ispyisail »

from the wiki
Router Performance

Your router has a CPU and that CPU has a limit on how much data is can process per second. Almost nothing written on this page will be true if you are trying to exceed the limitations of your router. Quoting Clint Eastwood “A man needs to know his limitations” so know your router's limitations. When you are exceeding your throughput limitation you will see “CPU Load Averages” on the Status screen approach 1.0 and strange unexplained things happening.

This will happen somewhere between 10Mbps and 500Mbps depending on your router and what Gargoyle features you are using. To use Gargoyle you must reduce the download/upload link speeds on your QoS pages so that your CPU never gets near the 1.0 limit even under fully saturated conditions.

Bandwidth monitoring and QoS are the two features that take the most processing for your router. If you turn them off you will get more through put but of course you will lose many of the reasons you are trying to use Gargoyle.

Don't complain on the forum that your router's native firmware gives you better throughput than Gargoyle firmware does. With Gargoyle you are getting features and stability which you do not have with your native firmware. If you cannot achieve the speeds you want get a faster router.

pmerrill
Posts: 290
Joined: Wed Feb 15, 2012 8:23 pm

Re: gargoyle-ispy 2015-April-20 05:38.torrent

Post by pmerrill »

I second ispyisail's comments. I went from a tp-link 1043nd to a tp-link wdr 4300 and there is a big difference in throughput. However, I remember something mentioned that indicated AA was faster than BB for the same configuration, even for a really basic configuration (no firewall rules, no QoS, etc).

Here's a couple of links.
https://forum.openwrt.org/viewtopic.php?id=45864
https://forum.openwrt.org/viewtopic.php?id=52524

It appears that there is a 10% performance hit (ish).

I'm not sure if the very latest versions of BB are any better. Can anyone confirm?
Paul
Gargoyle 1.11.x on TP-Link Archer C7 V2 H/W

Lantis
Moderator
Posts: 6735
Joined: Mon Jan 05, 2015 5:33 am
Location: Australia

Re: gargoyle-ispy 2015-April-20 05:38.torrent

Post by Lantis »

The point of this build is that it back ports the speed fixes from the latest Trunk builds to Gargoyle.

It's still a limitation however, both cpu speed and a few other bottle necks (bwmon etc).
http://lantisproject.com/downloads/gargoyle_ispyisail.php for the latest releases
Please be respectful when posting. I do this in my free time on a volunteer basis.

Evzen
Posts: 16
Joined: Tue Mar 10, 2015 7:03 pm

Re: gargoyle-ispy 2015-April-20 05:38.torrent

Post by Evzen »

It's well known that TL-WR4300 is powerful enough - even without HW NAT! - to handle 240Mbit WAN->LAN throughput.
And it's also known that even TL-WR1043v1 should handle that...

That rather alibistic If you cannot achieve the speeds you want get a faster router. statement is becoming quite obsolete with nowadays routers.
How old is that page, BTW?
Please don't get me wrong, I'm not complaining, just discussing.

As I see it, the whole situation is rather about developers not having their own Internet connections fast enough, so that they would face the problem on their own.
You never really care about a problem until it gets your own problem...
UPC broadband 240/20 Mbit
TP-LINK TL-WDR4300 v1.7

Post Reply