Page 4 of 5

Re: How too install and use DNSCrypt with Gargoyle

Posted: Sun Apr 28, 2019 1:01 am
by CBx86
I dont find a good DNSCrypt proxy for me, but i find a test:
https://rootcanary.org/test.html

:D

Re: How too install and use DNSCrypt with Gargoyle

Posted: Mon Apr 29, 2019 12:29 pm
by CBx86
For adventurers:

I installed dnscrypt v2. Use a external usb.
https://github.com/jedisct1/dnscrypt-pr ... on-OpenWRT

I get a loop. dnsmasq send to dnscrypt who send to dnsmasq...

:|

Will search for help on openwrt forum.

Re: How too install and use DNSCrypt with Gargoyle

Posted: Mon Apr 29, 2019 5:25 pm
by RomanHK
It works for me. You will have a problem with RAM or storage (the program still downloads data from the net). Try to perform the extroot and convert the entire root to an external repository. Also see if you have enough RAM (enter free with ssh).

Re: How too install and use DNSCrypt with Gargoyle

Posted: Mon Apr 29, 2019 8:32 pm
by CBx86
I see on my attempts, got a nice amount of resources (processor and RAM).

In the loop dnssec send to dnscrypt and crypt back to dnssec until tcp and udp limit.

If want see:
https://pastebin.com/ksEWNfKd

The router survive with free RAM (40%), disk space i dont remember.

I will try extroot, to do a new-and-totally clean attempt (all default).

Let´s see. :)

Re: How too install and use DNSCrypt with Gargoyle

Posted: Tue Apr 30, 2019 1:32 am
by RomanHK
This line is suspicious to me:

Code: Select all

tcp        0      0 127.0.0.53:53           0.0.0.0:*               LISTEN      5980/dnscrypt-proxy
This is a line from the dnscrypt-proxy.toml file:

Code: Select all

listen_addresses = ['127.0.0.1:5300']
Did you change the IP and port in the dnscrypt-proxy.toml file?

Re: How too install and use DNSCrypt with Gargoyle

Posted: Tue Apr 30, 2019 3:56 am
by CBx86
Yeap. I changed to 127.0.0.53:53.
Will try roll back to 127.0.0.1:5300
Thanks!

Re: How too install and use DNSCrypt with Gargoyle

Posted: Tue Apr 30, 2019 3:30 pm
by CBx86
Reflash the router, all default. Clean installation, no qos, nothing customized.

1.11.X (Built 20190426-2024 git@ddc7c0ba)

Using 127.0.0.1.

Same loop. I will give a time on this.

Must have other factor who i cant see.

Dnscrypt V1 works nice!

Many Thanks! :D

Re: How too install and use DNSCrypt with Gargoyle

Posted: Thu Apr 29, 2021 1:22 am
by taz-kun
How do I make it work? leave the steps please

Re: How too install and use DNSCrypt with Gargoyle

Posted: Thu Apr 29, 2021 2:48 am
by Lantis
Did you read the first post..?

Re: How too install and use DNSCrypt with Gargoyle

Posted: Thu Apr 29, 2021 1:19 pm
by taz-kun
Yeah I can't make it work

it says to use this src / gz exopenwrthttp: //exopenwrt.and.in.net/attitude_ad ... x / packages but it doesn't install the opkg it can't find...