Re: Gargoyle-ispy 2014-July-28.7z
Posted: Mon Aug 11, 2014 10:29 pm
https://dev.openwrt.org/changeset/41952 plsispyisail wrote: Bump OpenWrt to r41503
Gargoyle Forum
A forum to discuss the Gargoyle web interface for Openwrt
https://www.gargoyle-router.com/phpbb/
Gargoyle-ispy 2014-July-28.7z
Page 2 of 3
Re: Gargoyle-ispy 2014-July-28.7z
Posted: Tue Aug 12, 2014 12:41 am
That patch will only effect OpenWRT trunk. These builds from ispyisail will still be using OpenWRT Attitude Adjustment because that's the OpenWRT branch Gargoyle is built with.out of rules wrote: https://dev.openwrt.org/changeset/41952 pls
Will need to wait and see if it gets back ported to Attitude Adjustment branch.
Re: Gargoyle-ispy 2014-July-28.7z
Posted: Tue Aug 12, 2014 5:48 am
TrueThat patch will only effect OpenWRT trunk. These builds from ispyisail will still be using OpenWRT Attitude Adjustment because that's the OpenWRT branch Gargoyle is built with.
This week some time Eric is about to do a final build against AA
Then onto BB
Re: Gargoyle-ispy 2014-July-28.7z
Posted: Wed Aug 13, 2014 5:59 pm
i am sorry for asking this here but i thought i'd try dd-wrt before trying your new release and now that i want to go back i am stuck.. whenever i flash any gargoyle bin it just restarts and back to the same firmware,
no firmware can be flashed from gui and the recovery window is too narrow i cannot successfully flash with tftp. could this be nvram problem?
or is there a bin i can use to go back to gargoyle please???
my quota is being abused and the people in my network is out of control i need to get back that easy-to-configure quota limit.
thank you.
no firmware can be flashed from gui and the recovery window is too narrow i cannot successfully flash with tftp. could this be nvram problem?
or is there a bin i can use to go back to gargoyle please???
my quota is being abused and the people in my network is out of control i need to get back that easy-to-configure quota limit.
thank you.
Re: Gargoyle-ispy 2014-July-28.7z
Posted: Thu Aug 14, 2014 11:30 am
First go to stock firmware. Than flash gargoyle.
Re: Gargoyle-ispy 2014-July-28.7z
Posted: Thu Aug 14, 2014 4:13 pm
i tried but nothing works, after flash i still get dd-wrt @_@
its so weird i used to switch between the two no problems via gui
its so weird i used to switch between the two no problems via gui
Re: Gargoyle-ispy 2014-July-28.7z
Posted: Thu Aug 14, 2014 11:25 pm
You know you probably have to take Stock can cut down the bin file? There is a thread from memory on dd-wrt that has all the "back to stock" files as an attachment.
Re: Gargoyle-ispy 2014-July-28.7z
Posted: Fri Aug 15, 2014 4:57 am
I once faced this problem too. Everytime I tried to upgrade new firmware when using DD-WRT, it came back after reboot. Even webrevert images DD-WRT provides didn't work.
I solved this problem by using SCP to copy firmware image (beware, sometimes you need to use stripped image, depends on router) to /tmp folder on router. Then I issued this command (image.bin is name of the firmware file I uploaded):
After that I finally managed to get back to factory firmware.
This could probably also solved using TFTP.
I solved this problem by using SCP to copy firmware image (beware, sometimes you need to use stripped image, depends on router) to /tmp folder on router. Then I issued this command (image.bin is name of the firmware file I uploaded):
Code: Select all
mtd -r write /tmp/image.bin linuxThis could probably also solved using TFTP.
Re: Gargoyle-ispy 2014-July-28.7z
Posted: Fri Aug 15, 2014 12:21 pm
Is it possible to have ipv6 DHCP on local network ? With gargoyle AA or BB later ?
Re: Gargoyle-ispy 2014-July-28.7z
Posted: Fri Aug 15, 2014 12:57 pm
When will be the first BB gargoyle version online ? Cant wait.ispyisail wrote:TrueThat patch will only effect OpenWRT trunk. These builds from ispyisail will still be using OpenWRT Attitude Adjustment because that's the OpenWRT branch Gargoyle is built with.
This week some time Eric is about to do a final build against AA
Then onto BB
