Page 1 of 3

Gargoyle-ispy 2014-July-28.7z

Posted: Mon Jul 28, 2014 2:00 am
by ispyisail
USE AT YOU OWN RISK

Gargoyle-ispy 2014-July-28.7z
http://goo.gl/DmLuMC

Bump OpenWrt to r41503

Plus other stuff

Re: Gargoyle-ispy 2014-July-28.7z

Posted: Mon Jul 28, 2014 3:37 am
by tapper
Thanks mate. I installed on my TP-Link WR1043ND v2.1 all is good.
I cant wate for Gargoyle on my WD N750 it's grate with openwrt but its not the same as Gargoyle for me imo

Re: Gargoyle-ispy 2014-July-28.7z

Posted: Mon Jul 28, 2014 2:00 pm
by scrmtrey
Nice. Will update my wr1043nd ASAP , later this week.

Also it would be great if you could post release notes or changes , more than just version. :)


Thanks for your work.

Re: Gargoyle-ispy 2014-July-28.7z

Posted: Mon Jul 28, 2014 3:11 pm
by ispyisail

Re: Gargoyle-ispy 2014-July-28.7z

Posted: Mon Jul 28, 2014 5:55 pm
by gio25
Something for the TL-941ND v5?

Re: Gargoyle-ispy 2014-July-28.7z

Posted: Fri Aug 01, 2014 3:52 am
by Sobol
Updated to this version, strange warning (never listed in dmesg before):
[81287.980000] ------------[ cut here ]------------
[81287.980000] WARNING: at /home/user/gargoyle/ar71xx-src/build_dir/linux-ar71xx_generic/compat-wireless-2014-05-22/net/mac80211/rx.c:3372 0x80e1f210()
[81288.000000] Rate marked as an HT rate but passed status->rate_idx is not an MCS index [0-76]: 79 (0x4f)
[81288.010000] Modules linked in: ppp_mppe sha1_generic ecb crypto_blkcipher cryptomgr aead crypto_hash fuse qcserial option usb_wwan ums_usbat ums_sddr55 ums_sddr09 ums_karma ums_jumpshot ums_isd200 ums_freecom ums_datafab ums_cypress ums_alauda sierra_net(O) sierra(O) usbserial usblp usbnet cdc_acm ath79_wdt ledtrig_usbdev ledtrig_netdev xt_set(O) ip_set_list_set(O) ip_set_hash_netport(O) ip_set_hash_netiface(O) ip_set_hash_net(O) ip_set_hash_ipportnet(O) ip_set_hash_ipportip(O) ip_set_hash_ipport(O) ip_set_hash_ip(O) ip_set_bitmap_port(O) ip_set_bitmap_ipmac(O) ip_set_bitmap_ip(O) ip_set(O) ebt_among ebt_802_3 nfnetlink xt_IMQ imq ipt_weburl ipt_webmon ipt_timerange nf_nat_tftp nf_conntrack_tftp nf_nat_snmp_basic nf_conntrack_snmp nf_nat_sip nf_conntrack_sip nf_nat_pptp nf_conntrack_pptp nf_nat_h323 nf_conntrack_h323 nf_nat_proto_gre nf_conntrack_proto_gre nf_nat_amanda nf_conntrack_amanda nf_conntrack_broadcast nf_nat_irc nf_conntrack_irc nf_nat_ftp nf_conntrack_ftp xt_iprange xt_HL xt_hl xt_ecn ipt_ECN xt_CLASSIFY xt_time xt_tcpmss xt_statistic xt_mark xt_length xt_DSCP xt_dscp xt_string xt_layer7 xt_quota xt_pkttype xt_physdev xt_owner ipt_bandwidth ipt_REDIRECT ipt_NETMAP ipt_MASQUERADE iptable_nat nf_nat xt_recent xt_helper xt_connmark xt_connbytes pptp pppoe xt_conntrack xt_CT xt_NOTRACK iptable_raw xt_state nf_conntrack_ipv4 nf_defrag_ipv4 nf_conntrack pppox ipt_REJECT xt_TCPMSS ipt_LOG xt_comment xt_multiport xt_mac xt_limit iptable_mangle iptable_filter ip_tables nfsd nfs msdos ip_gre gre tun ppp_async ppp_generic slhc vfat fat lockd sunrpc hfsplus ath9k(O) ath9k_common(O) ath9k_hw(O) ath(O) nls_utf8 nls_koi8_r nls_iso8859_2 nls_iso8859_15 nls_iso8859_13 nls_iso8859_1 nls_cp866 nls_cp852 nls_cp850 nls_cp775 nls_cp437 nls_cp1251 nls_cp1250 mac80211(O) ts_fsm ts_bm ts_kmp crc_ccitt exportfs cfg80211(O) compat(O) arc4 aes_generic usb_storage ohci_hcd ehci_hcd sd_mod ext4 jbd2 mbcache usbcore usb_common scsi_mod nls_base crc16 crypto_algapi ledtrig_timer ledtrig_default_on leds_gpio gpio_button_hotplug(O)
[81288.190000] Call Trace:[<802798c8>] 0x802798c8
[81288.190000] [<802798c8>] 0x802798c8
[81288.190000] [<80071aec>] 0x80071aec
[81288.200000] [<80e1f210>] 0x80e1f210
[81288.200000] [<80071ba0>] 0x80071ba0
[81288.210000] [<80e1f210>] 0x80e1f210
[81288.210000] [<80de53e0>] 0x80de53e0
[81288.210000] [<801e0694>] 0x801e0694
[81288.220000] [<80096eec>] 0x80096eec
[81288.220000] [<8007c720>] 0x8007c720
[81288.220000] [<80ecc60c>] 0x80ecc60c
[81288.230000] [<80de6758>] 0x80de6758
[81288.230000] [<80162534>] 0x80162534
[81288.230000] [<80de3e14>] 0x80de3e14
[81288.240000] [<80076bd0>] 0x80076bd0
[81288.240000] [<800770f4>] 0x800770f4
[81288.240000] [<80077300>] 0x80077300
[81288.250000] [<800a85a0>] 0x800a85a0
[81288.250000] [<80077534>] 0x80077534
[81288.250000] [<800631cc>] 0x800631cc
[81288.260000] [<800922c4>] 0x800922c4
[81288.260000] [<800633a0>] 0x800633a0
[81288.270000] [<800952f0>] 0x800952f0
[81288.270000] [<800a8240>] 0x800a8240
[81288.270000] [<80064c08>] 0x80064c08
[81288.280000] [<800633c0>] 0x800633c0
[81288.280000] [<802e88b0>] 0x802e88b0
[81288.280000] [<8030e888>] 0x8030e888
[81288.290000] [<802e80dc>] 0x802e80dc
[81288.290000]
[81288.290000] ---[ end trace a13c482b78bf0253 ]---

Re: Gargoyle-ispy 2014-July-28.7z

Posted: Sat Aug 02, 2014 5:25 pm
by scrmtrey
After one day wifi slow down to 5mbps. Previous version works fine even after 14 days. Really sad.

Probably will go back to previous version.

Re: Gargoyle-ispy 2014-July-28.7z

Posted: Mon Aug 04, 2014 12:41 am
by Sobol
Problem with error "ath: phy0: Failed to stop TX DMA" at TL-WR1043ND v.1 also isn't resolved - there is same errors after update to 2014-July-28 version, but as I see it can be expected in hight traffic time and low traffic times :
[94400.070000] ath: phy0: Failed to stop TX DMA, queues=0x008!
[94400.990000] ath: phy0: Failed to stop TX DMA, queues=0x008!
[94570.770000] ath: phy0: Failed to stop TX DMA, queues=0x00c!
[94720.070000] ath: phy0: Failed to stop TX DMA, queues=0x008!
[94872.540000] ath: phy0: Failed to stop TX DMA, queues=0x008!
[95135.090000] ath: phy0: Failed to stop TX DMA, queues=0x008!
[95767.100000] ath: phy0: Failed to stop TX DMA, queues=0x004!
[95769.970000] ath: phy0: Failed to stop TX DMA, queues=0x004!
[96029.960000] ath: phy0: Failed to stop TX DMA, queues=0x004!
[96030.170000] ath: phy0: Failed to stop TX DMA, queues=0x004!
[96098.770000] ath: phy0: Failed to stop TX DMA, queues=0x004!
[96099.490000] ath: phy0: Failed to stop TX DMA, queues=0x004!
[96115.980000] ath: phy0: Failed to stop TX DMA, queues=0x004!
[96163.090000] ath: phy0: Failed to stop TX DMA, queues=0x104!
[96271.620000] ath: phy0: Failed to stop TX DMA, queues=0x004!
[96279.410000] ath: phy0: Failed to stop TX DMA, queues=0x004!
[96358.660000] ath: phy0: Failed to stop TX DMA, queues=0x004!
[96402.490000] ath: phy0: Failed to stop TX DMA, queues=0x004!
[96509.910000] ath: phy0: Failed to stop TX DMA, queues=0x004!
[96526.600000] ath: phy0: Failed to stop TX DMA, queues=0x004!
[96613.130000] ath: phy0: Failed to stop TX DMA, queues=0x004!
[96677.430000] ath: phy0: Failed to stop TX DMA, queues=0x004!
[96691.560000] ath: phy0: Failed to stop TX DMA, queues=0x004!
[96693.820000] ath: phy0: Failed to stop TX DMA, queues=0x004!
[96694.330000] ath: phy0: Failed to stop TX DMA, queues=0x004!
[96810.140000] ath: phy0: Failed to stop TX DMA, queues=0x004!
[96841.170000] ath: phy0: Failed to stop TX DMA, queues=0x004!
[96847.930000] ath: phy0: Failed to stop TX DMA, queues=0x004!
[96858.690000] ath: phy0: Failed to stop TX DMA, queues=0x004!
[96870.380000] ath: phy0: Failed to stop TX DMA, queues=0x004!
[106371.980000] ath: phy0: Failed to stop TX DMA, queues=0x008!
[202525.820000] ath: phy0: Failed to stop TX DMA, queues=0x004!
Thinking about downgrade to previous version.

Re: Gargoyle-ispy 2014-July-28.7z

Posted: Mon Aug 04, 2014 8:45 am
by scrmtrey
Yes, the same as before june 15, june 15 version works awesome.

Re: Gargoyle-ispy 2014-July-28.7z

Posted: Mon Aug 11, 2014 1:21 am
by robnitro
How do you exactly build it?
Git clone, and then ./build.sh "target" or in your case all of them?
I did a build but it was odd, a lot of things said undefined in the web interface!