Page 1 of 1

Gargoyle-ispy 2014-January-01.7z

Posted: Thu Jan 02, 2014 5:25 am
by ispyisail
USE AT YOUR OWN RISK

Happy New Year

Gargoyle-ispy 2014-January-01.7z
http://goo.gl/jfwuUo

Bump Gargoyle

Re: Gargoyle-ispy 2014-January-01.7z

Posted: Thu Jan 02, 2014 9:50 am
by tapper
Hi mate happy new year! Thanks for the bins. Is there any notable changes? As i have a lot on so wood like to no if it's worth testing. mite have to wait til i get board lol do you no if-how safe it will be to test on a e3000 or should i just stick to my wrt160nl?

Re: Gargoyle-ispy 2014-January-01.7z

Posted: Thu Jan 02, 2014 11:50 pm
by ispyisail
plugin usb-storage

miniupnpd

switchinfo: add tplink tl-wr841n v8

switchinfo: add tplink tl-wr740/741 v4

fix display of proper keysize for blowfish cyphers in openvpn client config

plus other stuff

Re: Gargoyle-ispy 2014-January-01.7z

Posted: Sun Jan 05, 2014 6:28 am
by pomah
Had the following issue on 1043:

Jan 5 11:23:26 tp1043 kern.err kernel: [517574.760000] ath: phy0: Failed to stop TX DMA, queues=0x100!
Jan 5 11:23:27 tp1043 kern.err kernel: [517575.720000] ath: phy0: Failed to stop TX DMA, queues=0x100!
Jan 5 11:23:28 tp1043 kern.err kernel: [517577.130000] ath: phy0: Failed to stop TX DMA, queues=0x100!
Jan 5 11:23:29 tp1043 kern.err kernel: [517578.070000] ath: phy0: Failed to stop TX DMA, queues=0x100!
Jan 5 11:23:30 tp1043 kern.err kernel: [517579.010000] ath: phy0: Failed to stop TX DMA, queues=0x100!
Jan 5 11:23:31 tp1043 kern.err kernel: [517579.970000] ath: phy0: Failed to stop TX DMA, queues=0x100!
Jan 5 11:23:32 tp1043 kern.err kernel: [517580.920000] ath: phy0: Failed to stop TX DMA, queues=0x100!
Jan 5 11:23:33 tp1043 kern.err kernel: [517581.870000] ath: phy0: Failed to stop TX DMA, queues=0x100!
Jan 5 11:23:34 tp1043 kern.err kernel: [517582.820000] ath: phy0: Failed to stop TX DMA, queues=0x100!
Jan 5 11:23:35 tp1043 kern.err kernel: [517583.770000] ath: phy0: Failed to stop TX DMA, queues=0x100!
Jan 5 11:23:37 tp1043 kern.err kernel: [517585.170000] ath: phy0: Failed to stop TX DMA, queues=0x100!
Jan 5 11:23:37 tp1043 kern.err kernel: [517586.120000] ath: phy0: Failed to stop TX DMA, queues=0x100!
Jan 5 11:23:38 tp1043 kern.err kernel: [517587.060000] ath: phy0: Failed to stop TX DMA, queues=0x100!
Jan 5 11:23:39 tp1043 kern.err kernel: [517588.020000] ath: phy0: Failed to stop TX DMA, queues=0x100!
Jan 5 11:23:40 tp1043 kern.err kernel: [517588.970000] ath: phy0: Failed to stop TX DMA, queues=0x100!
Jan 5 11:23:41 tp1043 kern.err kernel: [517589.930000] ath: phy0: Failed to stop TX DMA, queues=0x100!
Jan 5 11:23:42 tp1043 kern.err kernel: [517590.870000] ath: phy0: Failed to stop TX DMA, queues=0x100!
Jan 5 11:23:43 tp1043 kern.err kernel: [517591.830000] ath: phy0: Failed to stop TX DMA, queues=0x100!
Jan 5 11:23:46 tp1043 kern.err kernel: [517594.180000] ath: phy0: Failed to stop TX DMA, queues=0x100!
Jan 5 11:23:47 tp1043 kern.err kernel: [517595.440000] ath: phy0: Failed to stop TX DMA, queues=0x100!
Jan 5 11:23:47 tp1043 kern.err kernel: [517595.920000] ath: phy0: Failed to stop TX DMA, queues=0x100!
Jan 5 11:23:48 tp1043 kern.err kernel: [517596.860000] ath: phy0: Failed to stop TX DMA, queues=0x100!
Jan 5 11:23:49 tp1043 kern.err kernel: [517597.820000] ath: phy0: Failed to stop TX DMA, queues=0x100!
Jan 5 11:23:51 tp1043 kern.err kernel: [517599.230000] ath: phy0: Failed to stop TX DMA, queues=0x100!
Jan 5 11:23:52 tp1043 kern.err kernel: [517600.170000] ath: phy0: Failed to stop TX DMA, queues=0x100!
Jan 5 11:23:52 tp1043 kern.err kernel: [517601.110000] ath: phy0: Failed to stop TX DMA, queues=0x100!
Jan 5 11:23:53 tp1043 kern.err kernel: [517602.070000] ath: phy0: Failed to stop TX DMA, queues=0x100!

The wifi went down and then 1 min later came back up.

Re: Gargoyle-ispy 2014-January-01.7z

Posted: Mon Jan 06, 2014 5:39 pm
by pieterb
I also had problems with wifi and continuous reboots on a Netgear WNDR3700. I tried:
iw dev wlan0 set power_save off
(found on https://bugzilla.kernel.org/show_bug.cgi?id=56301 and will see if that fixes the problems.

I also noticed the admin screens on https are not visible using latest version of Chrome. It works fine on Firefox.

Wireless speeds seems to be improved quite a lot. Switching on/off wifi using wifitoggle works fine, see
http://wiki.openwrt.org/toh/netgear/wnd ... he.buttons