Page 1 of 2

1.12.0.x gargoyle-ispy 2020-March-02 06

Posted: Tue Mar 03, 2020 1:23 pm
by ispyisail
USE AT YOUR OWN RISK

WARNING: DO NOT PRESERVE SETTINGS

Now includes packages

1.12.0.x gargoyle-ispy 2020-March-02 06
Torrent
http://bit.ly/2VCnP5w

magnet:?xt=urn:btih:c4cbaeb90543d0ee2bdd84b8b008d6a03280414c&dn=1.12.0.x%20gargoyle-ispy%202020-March-02%2006.7z&tr=udp%3a%2f%2ftracker.openbittorrent.com%3a80&tr=udp%3a%2f%2fopen.demonii.com%3a1337&tr=udp%3a%2f%2ftracker.coppersurfer.tk%3a6969&tr=udp%3a%2f%2ftracker.leechers-paradise.org%3a6969&tr=udp%3a%2f%2ftracker.coppersurfer.tk%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.open-internet.nl%3a6969%2fannounce&tr=udp%3a%2f%2fallesanddro.de%3a1337%2fannounce&tr=udp%3a%2f%2f9.rarbg.to%3a2710%2fannounce

Routers
http://bit.ly/2IdF1Gw


Changelog
(see creation date for commit date)

https://github.com/ericpaulbishop/gargoyle/commits/1.12

Re: 1.12.0.x gargoyle-ispy 2020-March-02 06

Posted: Sat Mar 07, 2020 6:55 am
by ektus
Installed on a (previously) spare TL-WR1043ND V1, running as AP and wireless repeater. No problems so far.

Seeding the torrent, too :D

Re: 1.12.0.x gargoyle-ispy 2020-March-02 06

Posted: Mon Mar 23, 2020 2:43 am
by phgerin
I have a few reboots with this build, not sure what causing them. I can't see anything in the logs (for now).

WRT 1200ac

Re: 1.12.0.x gargoyle-ispy 2020-March-02 06

Posted: Tue Mar 24, 2020 3:54 am
by ektus
Uptime: 17 days, 14 hours, 11 minutes

So no, mine is stable. But it's being used as Wireless Repeater only, so it has very minor load.

Re: 1.12.0.x gargoyle-ispy 2020-March-02 06

Posted: Wed Mar 25, 2020 10:37 pm
by ispyisail
phgerin wrote:
Mon Mar 23, 2020 2:43 am
I have a few reboots with this build, not sure what causing them. I can't see anything in the logs (for now).

WRT 1200ac
reset your router

Re: 1.12.0.x gargoyle-ispy 2020-March-02 06

Posted: Wed Apr 01, 2020 3:12 am
by pmerrill
Just did an update to this latest one and noticed a couple of curiosities (btw, I did an upgrade but did NOT preserve settings)
Router is Archer C7 V2:
  • Wifi works fine but the activity leds no longer display
  • When I turned on QoS Download I noticed that the Congestion Control Status is blank. I remember in past releases it did show some info
Any ideas?

Re: 1.12.0.x gargoyle-ispy 2020-March-02 06

Posted: Wed Apr 01, 2020 5:41 am
by Lantis
Saving QOS again should fix the congestion control status being blank.

Re: 1.12.0.x gargoyle-ispy 2020-March-02 06

Posted: Wed Apr 01, 2020 6:09 pm
by pmerrill
Lantis wrote:
Wed Apr 01, 2020 5:41 am
Saving QOS again should fix the congestion control status being blank.
Hey Lantis, thanks for the suggestion but no luck. I've enabled, disabled, tried different browsers no luck. I'm an old Unix/ASM hack so I can login to the router via root was wondering if there is anything I can check in /etc that may indicate a problem?

It's also strange that while wifi works fine, the leds on the router no longer display activity. Is there some file I can check in /etc to see if there is a setting problem?

My only other approach is to do a backup, re-flash and then a restore and see if that "fixes" it.

Very strange to me.

Re: 1.12.0.x gargoyle-ispy 2020-March-02 06

Posted: Wed Apr 01, 2020 8:37 pm
by Lantis
Those stats not showing up are usually accompanied by log entries along the lines of "device IMQ0 does not exist"
Which indicates that the IMQ driver failed to start correctly.
Usually saving QOS again causes it to restart and therefore attempt to reinsert the driver.

I need to put some try, wait, fail code around the IMQ driver but I don't have a reliable way of making it fail to load so I can't test it.

Re: 1.12.0.x gargoyle-ispy 2020-March-02 06

Posted: Fri Apr 03, 2020 1:46 am
by phgerin
ispyisail wrote:
Wed Mar 25, 2020 10:37 pm
phgerin wrote:
Mon Mar 23, 2020 2:43 am
I have a few reboots with this build, not sure what causing them. I can't see anything in the logs (for now).

WRT 1200ac
reset your router
Disabling quotas fixed my crashes.