Gargoyle Forum

USE AT YOUR OWN RISK

WARNING: DO NOT PRESERVE SETTINGS

Now includes packages

Gargoyle 1.11.x to the Openwrt 18.06.4 tag.

1.11.0.x gargoyle-ispy 2019-July-06 11
Torrent
http://bit.ly/2xCcOno

magnet:?xt=urn:btih:dea40071f1a6f9e386236075553f565ef603bfee&dn=1.11.0.x%20gargoyle-ispy%202019-July-06%2011.7z&tr=udp%3a%2f%2ftracker.openbittorrent.com%3a80&tr=udp%3a%2f%2fopen.demonii.com%3a1337&tr=udp%3a%2f%2ftracker.coppersurfer.tk%3a6969&tr=udp%3a%2f%2ftracker.leechers-paradise.org%3a6969&tr=udp%3a%2f%2ftracker.coppersurfer.tk%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.open-internet.nl%3a6969%2fannounce&tr=udp%3a%2f%2fallesanddro.de%3a1337%2fannounce&tr=udp%3a%2f%2f9.rarbg.to%3a2710%2fannounce

Routers
http://bit.ly/2YISY5W


Changelog
(see creation date for commit date)

https://github.com/ericpaulbishop/gargo ... its/master

Just loaded on an Archer C7 v2 & running smooth. Thank you to everyone for the continued hard work for mere mortals like me

Upgraded WRT1200AC from 1.11.0 yesterday (With preserving settings. Yes, I' aware about possible issues).

So far so good.
Many thanks.

stevencox wrote:Just loaded on an Archer C7 v2 & running smooth. Thank you to everyone for the continued hard work for mere mortals like me

Second that. Just upgraded my C7 V2 all running well. I preserved settings from a June release and it worked fine, no problems either.

Just installed this on my first Linksys WRT32X

easy to install and so far so good.

Going in production network, fingers crossed.

I had problems setting up the wireless config


I first tried setting up the config all in one go but it failed a couple of times

I found that if I set it up bit by bit it worked OK. (vs the whole config at once)

No action required but reporting just in case somebody else experiences the same thing.

TP-Link TL-WDR3600 v1

The TP-Link TL-WDR3600 v1 has problems with plugins and creating USB root drive.

Need to create a better report but this is just a summary for now.

I'm going to reflash and start again. (for a better report)

The problems started when trying to unmount the USB drive then format, then it got worse from there.

GL.iNet GL-AR150

When trying to set wifi up I get this message



I didn't get this message on my other routers?

router is connected to the internet

There's a logic error in the country check which can return undefined.
It's low priority on my list but needs to be fixed.
Only some people see the error and you can't force it to occur.

If they are all hardwired there should really be no issues. It doesn't make sense. The LAN is basically an open network.