Re: Gargoyle 1.11.0 Release Candidate 5
Posted: Wed Feb 06, 2019 5:41 pm
A forum to discuss the Gargoyle web interface for Openwrt
https://www.gargoyle-router.com/phpbb/
thanks. thats pretty simplify things.
"3. Select all Gargoyle packages and dependencies from the Administration menu (hint, there is more to be found than what is just shown initially, you may need to enable other dependencies first)"Lantis wrote:1. make custom
2. Select ipq40xx target
3. Select all Gargoyle packages and dependencies from the Administration menu (hint, there is more to be found than what is just shown initially, you may need to enable other dependencies first)
4. Exit and save config, then quit the build
5. Grab .config file from custom-src/.config and save it as targets/ipq40xx...../config. Add the other files as required to create a valid target
6. make clean
7. make FULL_BUILD=true ipq40xx
https://www.gargoyle-router.com/wiki/do ... umentation
https://openwrt.org/docs/guide-develope ... uildsystem
https://openwrt.org/docs/guide-user/add ... uild-guide
I con't find ipq40xx either ?ipq40xx target
Please try the image at http://lantisproject.com/gargoyle_custom/turris-omnia/RomanHK wrote:I used initramfs from here: https://downloads.openwrt.org/releases/ ... mfs.tar.gz . It's just about mediating uploading and flash gargoyle_1.11.x-mvebu-cortexa9-turris-omnia-sysupgrade.img.gz . Perhaps the current version of OpenWrt is sufficient.Lantis wrote:f2fs is possibly the only one that wouldn’t let it boot properly.
Including ath9/10k are both quite big for the sake of a single target.
If it works I may need to split it into a new target profile.
The main issue appears to be the initramfs.
f2fs is the default OpenWrt file system on this router.
I fed it with the command: mkfs.ext4 /dev/loop0 and reboot, so the configuration was saved correctly (ext4 but not suitable for flash).
ath9 / 10k is inevitable for wireless network operation (it would be an additional manual installation via opkg, but it would have to be a permanent storage with the current kernel). The directory https://downloads.openwrt.org/releases/ ... -a9_vfpv3/ has already changed and so opkg can not be used.
If this helps, I did not use the gargoyle_1.11.x-mvebu-cortexa9-turris-omnia-kernel.bin file - the flash did without this file.
Wow, perfect +1. On the functional page, everything is fine. Result:Lantis wrote:
Please try the image at http://lantisproject.com/gargoyle_custom/turris-omnia/
I have included ath9k + ath10k, as well as some other pre-requisite files.
I have also corrected the corrupted medkit file which should now work properly.
You will probably have no memory (V1 only has 32MB of RAM!)qzzipc wrote:I'm upgrade my TP-Link TL-WR1043N/ND v1 from 1.10 to 1.11 for the first time and i'm not very happy about the adblock plugin.
Code: Select all
wget -qO- --no-check-certificate "https://github.com/StevenBlack/hosts/raw/master/hosts" | awk -v r="$ENDPOINT_IP4" '{sub(/^0.0.0.0/, r)} $0 ~ "^"r' > /tmp/block.build.list