Gargoyle 1.11.0 Release Candidate 4

Want to share your OpenWrt / Gargoyle knowledge? Implemented a new feature? Let us know here.

Moderator: Moderators

Lantis
Moderator
Posts: 4962
Joined: Mon Jan 05, 2015 5:33 am
Location: Australia

Gargoyle 1.11.0 Release Candidate 4

Postby Lantis » Sun Nov 18, 2018 7:33 am

Gargoyle 1.11.0 Release Candidate 4
This version *should* become the final 1.11.0 if testing comes back ok (with some minor changes). There is still currently no ETA on the final release of 1.11.0, which is why i'm providing this build now.

You are recommended to NOT preserve settings when upgrading to this build. You do so at your own risk.

http://lantisproject.com/gargoyle_1.11.x_rc4/
Alix - now included as part of x86
AR71XX - Available
Atheros - Available
BRCM47xx - Available
Mvebu - Available
Ramips - Available
x86 - Available

Packages are included in the above links and can be added as repositories to the Plugins page. It is important that you add both the normal repository and the kernelspecific repository. It is also important that you only add the repository for the profile that your router is built for. If you are unsure, you can check the Plugins page to see.

Devices with 4MB of flash memory are now not supported.
**IMPORTANT**
Devices with 8MB of flash have had their firmwares stripped to the bare minimum to allow them to be continued to be supported. It is recommended that after installing, you plug in a USB stick, format it, and set it up for use with Gargoyle either as an external plugin_root or as extroot. You can then reinstall the missing functionality from the plugin repository.
New plugins that you may wish to install are:
- plugin-gargoyle-ddns
- plugin-gargoyle-qos
- plugin-gargoyle-upnp
- plugin-gargoyle-usb-storage-full
- plugin-gargoyle-wol

Changes since 1.11.0 RC3

Code: Select all

* Stop Gargoyle from forgetting which base plugins i has installed, preventing further plugin installation
* Add kernel specific packages (kmods and the like) to build output. Can be added as a new repo


Changes since 1.10.0

Code: Select all

* Update to Openwrt 18.06 branch (Kernels 4.14.68 and 4.9.125)
* Add x86 profile
* Fixes to Samba network sharing
* Fixes to Tor (server config)
* Timezone changes (add Iran, rearrange Brazil, realign Turkey, fix regional server pools not updating)
* Fix button handlers for Archer series routers
* Add Quad9 DNS
* Fix Connection -> Basic page for devices with no wireless capabilities
* Add custom month bandwidth monitor (for aligning to ISP billing date)
* Fixes to restrictions module (not working on a single IP and not whitelisting URLs)
* Rework of OpenVPN config handling (certificates can now be permanently revoked. Disabled certificates will not be able to be connected with, but can be reinstated). Also add ability to generate single .ovpn file as config. Add new config options to assist mobile devices. Default cipher updated to more secure version
* New QoS default ruleset as per forum input
* QOSMON v2.3 with improved handling of dropped pings, smoother control algorithm and more user information displayed. Button added to reset the Fair Link Limit back to initial values
* Fixes to custom MAC Address setting not sticking
* Various GUI updates and cleanups
* Update DDNS Cloudflare configuration to handle new upstream API (you need to install a Gargoyle plugin to enable this now)
* Add HTTPS sniffing capabilities to Web URL Monitor and Restrictions sections
* New Theme "Flat Blue"
* Layer7 functionality disabled throughout firmware (it may return later...)
* Add GeoIP wifi country setting to GUI (with very specific conditions. You may only set this setting ONCE, and some users may never see this option if they do not meet certain regulatory requirements)
* Changes to Connected Hosts page (shows guests and upstream client connections separately)
* Allow filtering of Connection List page
* Translation updates for many languages
* Major effort to reduce firmware size to maintain smaller device compatibility (sorry, 4MB devices are not salvageable!)
* Fix WOL list being filled with unreachable entries
* Fixed email plugin not working
* Fix WOL list being filled with unreachable entries
* Changed startup order of minidlna and usb_storage to try to prevent minidlna not finding external media directories
* Update ramips default profile to 1.11.x codebase
* Separate usb-storage into 2 plugins. The "noshare" variant does not include SMB/CIFS/NFS/FTP support. To regain these, install plugin-gargoyle-usb-storage-full
* Separate DDNS into a plugin
* Separate QoS into a plugin. This also removes the ability to "throttle" quotas, leaving only the option to fully block devices once reaching the quota. This functionality can be restored by installing plugin-gargoyle-qos
* Separate WOL into a plugin
* Separate UPnP support into a plugin
* Update Atheros target to 1.11.x
* Update Alix target to 1.11.x (and merge with x86 as a new "alix" subprofile
* Fix plugins not showing up in menus on default installation
* x86 targets should now auto configure their Ethernet switches
* Switch to a single SSL library to reduce firmware size
* Rework small profiles to be even smaller, allowing us to support more devices
* Much much more!



This build is provided as is in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details.
Routers: Various ar71xx/mvebu/x86-64
http://lantisproject.com/downloads/gargoyle_ispyisail.php for the latest releases

Waterspuwer
Posts: 32
Joined: Mon Nov 12, 2018 6:04 am

Re: Gargoyle 1.11.0 Release Candidate 4

Postby Waterspuwer » Sun Nov 18, 2018 11:24 am

Did anything change from the previous RC4 build?
This one:
1.11.X (Built 20181112-1204 git@e1a5c094)

ispyisail
Moderator
Posts: 4599
Joined: Mon Apr 06, 2009 3:15 am
Location: New Zealand

Re: Gargoyle 1.11.0 Release Candidate 4

Postby ispyisail » Sun Nov 18, 2018 2:18 pm

If you are unsure, you can check the Plugins page to see.


Where is this?

example for x86 we need to add both
Image

Image

Code: Select all

http://lantisproject.com/gargoyle_1.11.x_rc4/x86/default_kernelspecific/


Code: Select all

http://lantisproject.com/gargoyle_1.11.x_rc4/x86/default/

rseiler
Posts: 179
Joined: Sun Dec 15, 2013 12:31 am

Re: Gargoyle 1.11.0 Release Candidate 4

Postby rseiler » Sun Nov 18, 2018 3:44 pm

Looking good so far on wndrmacv2. For anyone needing the plugin path for ar71xx....

Code: Select all

http://lantisproject.com/gargoyle_1.11.x_rc4/ar71xx/default

Lantis
Moderator
Posts: 4962
Joined: Mon Jan 05, 2015 5:33 am
Location: Australia

Re: Gargoyle 1.11.0 Release Candidate 4

Postby Lantis » Sun Nov 18, 2018 3:57 pm

rseiler wrote:Looking good so far on wndrmacv2. For anyone needing the plugin path for ar71xx....

Code: Select all

http://lantisproject.com/gargoyle_1.11.x_rc4/ar71xx/default


Except that your device is usb_large.
Routers: Various ar71xx/mvebu/x86-64
http://lantisproject.com/downloads/gargoyle_ispyisail.php for the latest releases

Lantis
Moderator
Posts: 4962
Joined: Mon Jan 05, 2015 5:33 am
Location: Australia

Re: Gargoyle 1.11.0 Release Candidate 4

Postby Lantis » Sun Nov 18, 2018 3:58 pm

ispyisail wrote:
If you are unsure, you can check the Plugins page to see.


Where is this?

example for x86 we need to add both
Image

Image

Code: Select all

http://lantisproject.com/gargoyle_1.11.x_rc4/x86/default_kernelspecific/


Code: Select all

http://lantisproject.com/gargoyle_1.11.x_rc4/x86/default/


Note the final entry on your plugin configuration page. It shows ar71xx default.
This is an easy way to tell what you need to add.
Routers: Various ar71xx/mvebu/x86-64
http://lantisproject.com/downloads/gargoyle_ispyisail.php for the latest releases

rseiler
Posts: 179
Joined: Sun Dec 15, 2013 12:31 am

Re: Gargoyle 1.11.0 Release Candidate 4

Postby rseiler » Sun Nov 18, 2018 4:16 pm

Lantis wrote:Except that your device is usb_large.

OK, and I see that's a different path, but how does it make a difference?

ispyisail
Moderator
Posts: 4599
Joined: Mon Apr 06, 2009 3:15 am
Location: New Zealand

Re: Gargoyle 1.11.0 Release Candidate 4

Postby ispyisail » Sun Nov 18, 2018 5:52 pm

Note the final entry on your plugin configuration page. It shows ar71xx default.
This is an easy way to tell what you need to add.


Thanks for the tip

Image

I'm posting for other people who aren't sure, I wasn't.

Lantis
Moderator
Posts: 4962
Joined: Mon Jan 05, 2015 5:33 am
Location: Australia

Re: Gargoyle 1.11.0 Release Candidate 4

Postby Lantis » Sun Nov 18, 2018 7:53 pm

rseiler wrote:
Lantis wrote:Except that your device is usb_large.

OK, and I see that's a different path, but how does it make a difference?


There is a chance that the kernel is compiled slightly differently between the two versions, and therefore modules which rely on the kernel (or dig deep into it) may operate in unexpected ways.
The kernel has a checksum calculated against it, and each kernel module is compiled to check for this before being allowed to install.
This would show up as plugins not being able to be installed.
Routers: Various ar71xx/mvebu/x86-64
http://lantisproject.com/downloads/gargoyle_ispyisail.php for the latest releases

Waterspuwer
Posts: 32
Joined: Mon Nov 12, 2018 6:04 am

Re: Gargoyle 1.11.0 Release Candidate 4

Postby Waterspuwer » Mon Nov 19, 2018 8:45 am

I'm unable to remove 1.10 from plugin list after adding 1.11-rc4 path:

Image

My router now has this uptime
5 days, 3 hours, 51 minutes
It's been solid as a rock with the last RC4 build (what changed with this new RC4 build?).

Wi-Fi channel settings are still semi broken though. Wi-Fi will not turn on after reboot on 'higher' channels. See RC3 thread for the details.


Return to “Show / Tell / Contribute”

Who is online

Users browsing this forum: No registered users and 2 guests