Page 1 of 6

[BROKEN] Gargoyle 1.11.0 Release Candidate 3

Posted: Sun Nov 11, 2018 3:05 am
by Lantis
Gargoyle 1.11.0 Release Candidate 3
This version *should* become the final 1.11.0 if testing comes back ok (with some minor changes). There is still currently no ETA on the final release of 1.11.0, which is why i'm providing this build now.

You are recommended to NOT preserve settings when upgrading to this build. You do so at your own risk.

http://lantisproject.com/gargoyle_1.11.x_rc3/
Alix - now included as part of x86
AR71XX - Available
Atheros - Available
BRCM47xx - Available
Mvebu - Available
Ramips - Available
x86 - Available

Packages are included in the above links and can be added as repositories to the Plugins page.

Devices with 4MB of flash memory are now not supported.
**IMPORTANT**
Devices with 8MB of flash have had their firmwares stripped to the bare minimum to allow them to be continued to be supported. It is recommended that after installing, you plug in a USB stick, format it, and set it up for use with Gargoyle either as an external plugin_root or as extroot. You can then reinstall the missing functionality from the plugin repository.
New plugins that you may wish to install are:
- plugin-gargoyle-ddns
- plugin-gargoyle-qos
- plugin-gargoyle-upnp
- plugin-gargoyle-usb-storage-full
- plugin-gargoyle-wol

Changes since 1.11.0 RC2

Code: Select all

* Update Atheros target to 1.11.x
* Update Alix target to 1.11.x (and merge with x86 as a new "alix" subprofile
* Fix plugins not showing up in menus on default installation
* x86 targets should now auto configure their Ethernet switches
Changes since 1.10.0

Code: Select all

* Update to Openwrt 18.06 branch (Kernels 4.14.68 and 4.9.125)
* Add x86 profile
* Fixes to Samba network sharing
* Fixes to Tor (server config)
* Timezone changes (add Iran, rearrange Brazil, realign Turkey, fix regional server pools not updating)
* Fix button handlers for Archer series routers
* Add Quad9 DNS
* Fix Connection -> Basic page for devices with no wireless capabilities
* Add custom month bandwidth monitor (for aligning to ISP billing date)
* Fixes to restrictions module (not working on a single IP and not whitelisting URLs)
* Rework of OpenVPN config handling (certificates can now be permanently revoked. Disabled certificates will not be able to be connected with, but can be reinstated). Also add ability to generate single .ovpn file as config. Add new config options to assist mobile devices. Default cipher updated to more secure version
* New QoS default ruleset as per forum input
* QOSMON v2.3 with improved handling of dropped pings, smoother control algorithm and more user information displayed. Button added to reset the Fair Link Limit back to initial values
* Fixes to custom MAC Address setting not sticking
* Various GUI updates and cleanups
* Update DDNS Cloudflare configuration to handle new upstream API (you need to install a Gargoyle plugin to enable this now)
* Add HTTPS sniffing capabilities to Web URL Monitor and Restrictions sections
* New Theme "Flat Blue"
* Layer7 functionality disabled throughout firmware (it may return later...)
* Add GeoIP wifi country setting to GUI (with very specific conditions. You may only set this setting ONCE, and some users may never see this option if they do not meet certain regulatory requirements)
* Changes to Connected Hosts page (shows guests and upstream client connections separately)
* Allow filtering of Connection List page
* Translation updates for many languages
* Major effort to reduce firmware size to maintain smaller device compatibility (sorry, 4MB devices are not salvageable!)
* Fix WOL list being filled with unreachable entries
* Fixed email plugin not working
* Fix WOL list being filled with unreachable entries
* Changed startup order of minidlna and usb_storage to try to prevent minidlna not finding external media directories
* Update ramips default profile to 1.11.x codebase
* Separate usb-storage into 2 plugins. The "noshare" variant does not include SMB/CIFS/NFS/FTP support. To regain these, install plugin-gargoyle-usb-storage-full
* Separate DDNS into a plugin
* Separate QoS into a plugin. This also removes the ability to "throttle" quotas, leaving only the option to fully block devices once reaching the quota. This functionality can be restored by installing plugin-gargoyle-qos
* Separate WOL into a plugin
* Separate UPnP support into a plugin
* Switch to a single SSL library to reduce firmware size
* Rework small profiles to be even smaller, allowing us to support more devices
* Much much more!

This build is provided as is in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details.

Re: Gargoyle 1.11.0 Release Candidate 3

Posted: Sun Nov 11, 2018 4:06 am
by Sgt-Greco
Thanks Lantis for all your hardwork.

If upgrading from RC2, do you still recommend to NOT preserve settings?

Re: Gargoyle 1.11.0 Release Candidate 3

Posted: Sun Nov 11, 2018 4:32 am
by Lantis
If you had menu issues with RC2, I’d not preserve.
If you had no issues, then preserving it should be ok.

Re: Gargoyle 1.11.0 Release Candidate 3

Posted: Sun Nov 11, 2018 5:22 am
by swasti
thank you! will try it later!
swasti

Re: Gargoyle 1.11.0 Release Candidate 3

Posted: Sun Nov 11, 2018 5:27 am
by Sgt-Greco
1043ND v.4
I preserved settings, upgraded from RC2.
I've also added

Code: Select all

http://lantisproject.com/gargoyle_1.11.x_rc3/ar71xx/default/
as plugin source.

Everything fine.

Re: Gargoyle 1.11.0 Release Candidate 3

Posted: Sun Nov 11, 2018 11:54 am
by swasti
updated vom RC1 to RC3. Settings not preserved but restored after upgrade.
All fine!

thanks

Re: Gargoyle 1.11.0 Release Candidate 3

Posted: Sun Nov 11, 2018 2:32 pm
by rseiler
Sgt-Greco wrote:

Code: Select all

http://lantisproject.com/gargoyle_1.11.x_rc3/ar71xx/default/[/quote]
Did that, but when I go to install a plugin (any of them, seemingly), it seems to install but actually doesn't. This seems vaguely familiar.

Maybe this is the problem. Look at this item, for example, for this build (all of the space requirements seem way high, not just this one):

Email notifications for Gargoyle (with SSL support)

Version: 2.0-2
Status: Not Installed
Required Disk Space: 3.828 MBytes

Now look at it for 1.10:

Email notifications for Gargoyle (with SSL support)

Version: 2.0-2
Status: Not Installed
Required Disk Space: 199.424 kBytes

wndrmacv2 (128MB RAM, 16MB flash)
Root Drive 4.938 MBytes Total, 4.602 MBytes Free

Re: Gargoyle 1.11.0 Release Candidate 3

Posted: Sun Nov 11, 2018 2:42 pm
by Sgt-Greco
there must be something wrong with the plugin sizes. Huge files.

Re: Gargoyle 1.11.0 Release Candidate 3

Posted: Sun Nov 11, 2018 3:45 pm
by Lantis
Make sure you drop the trailing slash from the repository link when adding it.

Can you provide a log after trying to install?
Plugin sizes include any missing dependencies which might be big depending what they are.

Re: Gargoyle 1.11.0 Release Candidate 3

Posted: Sun Nov 11, 2018 3:52 pm
by rseiler
No trailing slash used here.

Where is the log? I'm so used to using the plugin to access the log, but of course....