Gargoyle Forum

Posted: **Fri Nov 02, 2018 8:55 am**

My WRT32X wont update either with or without preserving settings - just bombs straight back as a reboot (no failed reboot/partition switching)

Posted: **Fri Nov 02, 2018 9:43 am**

ok swapped partitions and upgraded from 080918 version and that worked fine

Posted: **Fri Nov 02, 2018 10:53 am**

This version bricked my Archer C20 v1 router (flashed factory.bin from factory web interface)

Can someone help me?

Posted: **Fri Nov 02, 2018 11:34 am**

ramips/youku-yk1 seems to work fine. I preserved settings, don't see any problems, yet.

Posted: **Fri Nov 02, 2018 5:17 pm**

melquiferreira wrote:This version bricked my Archer C20 v1 router (flashed factory.bin from factory web interface)

Can someone help me?

Did you read the wiki for your device? Looks like there’s some pretty specific installation instructions.
https://openwrt.org/toh/tp-link/tp-link_archer_c20_1
https://git.openwrt.org/?p=openwrt/open ... e04b6ea676

Looks like you might now need to do a tftp recovery (hopefully that still works) otherwise you’ll need serial access to the device.

Posted: **Sat Nov 03, 2018 4:36 pm**

How can i install qos?I have a tplink wr 1043nd v3.
I added "http://www.gargoyle-router.com/packages ... x/default/"

But no QOS to install.

Posted: **Sat Nov 03, 2018 6:40 pm**

Knomax wrote:How can i install qos?I have a tplink wr 1043nd v3.
I added "http://www.gargoyle-router.com/packages ... x/default/"

But no QOS to install.

Packages are included in the above links and can be added as repositories to the Plugins page.

Code: Select all

http://lantisproject.com/gargoyle_1.11.x_rc2/ar71xx/usb

1.10.0 is not appropriate to add for 1.11.0

Posted: **Sun Nov 04, 2018 10:17 am**

Archer C7 V4
QoS plugin does not appear in Web menu on factory install
I have had to uninstall it and re-install using SCP , ssh and opkg,
Then it appeared on the Web menu @Firewall.
But it does not appear in System plugins menu
Thanks for a great job

Posted: **Sun Nov 04, 2018 3:57 pm**

Because it is not intended for “uninstall” if included from factory.
Please read the rest of the thread for the solution.

Posted: **Fri Nov 09, 2018 5:00 pm**

Lantis wrote:
melquiferreira wrote:This version bricked my Archer C20 v1 router (flashed factory.bin from factory web interface)

Can someone help me?
Did you read the wiki for your device? Looks like there’s some pretty specific installation instructions.
https://openwrt.org/toh/tp-link/tp-link_archer_c20_v1
https://git.openwrt.org/?p=openwrt/open ... e04b6ea676

Looks like you might now need to do a tftp recovery (hopefully that still works) otherwise you’ll need serial access to the device.

Can I install OpenWRT (file "ArcherC20V1_tp_recovery.bin") and after, install Gargoyle (file "gargoyle_1.11.x-ramips-mt7620-tplink_c20-v1-squashfs-sysupgrade.bin") ?

Gargoyle Forum

[BROKEN] Gargoyle 1.11.0 Release Candidate 2

Re: Gargoyle 1.11.0 Release Candidate 2

Re: Gargoyle 1.11.0 Release Candidate 2

Re: Gargoyle 1.11.0 Release Candidate 2

Re: Gargoyle 1.11.0 Release Candidate 2

Re: Gargoyle 1.11.0 Release Candidate 2

Re: Gargoyle 1.11.0 Release Candidate 2

Re: Gargoyle 1.11.0 Release Candidate 2

Re: Gargoyle 1.11.0 Release Candidate 2

Re: Gargoyle 1.11.0 Release Candidate 2

Re: Gargoyle 1.11.0 Release Candidate 2