Page 1 of 4

1.11.x gargoyle-ispy 2018-July-12 06:01

Posted: Wed Jul 11, 2018 3:19 pm
by ispyisail
USE AT YOUR OWN RISK

WARNING: DO NOT PRESERVE SETTINGS

Now includes packages

Do not install on 4MB routers

1.11.x

1.11.x gargoyle-ispy 2018-July-12 06:01
http://bit.ly/2Jea1Eu

magnet:?xt=urn:btih:8dcc686908a6189302885272424f0fc6f99482c8&dn=gargoyle-ispy%202018-July-12%2006_01.7z&tr=udp%3a%2f%2ftracker.openbittorrent.com%3a80&tr=udp%3a%2f%2fopen.demonii.com%3a1337&tr=udp%3a%2f%2ftracker.coppersurfer.tk%3a6969&tr=udp%3a%2f%2ftracker.leechers-paradise.org%3a6969&tr=udp%3a%2f%2ftracker.coppersurfer.tk%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.open-internet.nl%3a6969%2fannounce&tr=udp%3a%2f%2fallesanddro.de%3a1337%2fannounce&tr=udp%3a%2f%2f9.rarbg.to%3a2710%2fannounce


http://bit.ly/2L5CyO7

Code: Select all

Add Archer C7 v5 to ar71xx.ath10k_large
Clean build folder and fix multiprofile builds 
Additional ar71xx oversized image crash prevention
Add missing sha1sum to mvebu. Fixes smbpasswd problem
Handle busy wifi resource when scanning 
Set default SSID to 'Gargoyle'
Update mvebu strings and tempinfo
Update ca-certificates and provide ca-bundle 
Bump to Openwrt 18.06-rc1

Re: latest 1.11.x

Posted: Thu Jul 12, 2018 1:09 am
by ispyisail
Just tested on my C7 v2.

Basic tests and all working so far so go.

All packages installed this time.

Thanks Lantis- Looking good

Re: 1.11.x gargoyle-ispy 2018-July-12 06:01

Posted: Thu Jul 12, 2018 1:19 am
by ispyisail
This is interesting
Image

Re: 1.11.x gargoyle-ispy 2018-July-12 06:01

Posted: Thu Jul 12, 2018 2:00 am
by Lantis
Yah, the IPV6 modules are still being compiled into the build.
I need to figure out how to safely remove them without breaking anything. I think this is an oversight from Eric during the migration activities.

Re: 1.11.x gargoyle-ispy 2018-July-12 06:01

Posted: Thu Jul 12, 2018 11:45 am
by ektus
Wouldn't it be better to leave them in and enable Gargoyle to use V6? I've got V6 available, but can't make use of it due to Gargoyle being my main router.

Just a thought, don't know if it would even be possible or how much work would be involved. Low priority, anyway.


Regards
Ektus.

Re: 1.11.x gargoyle-ispy 2018-July-12 06:01

Posted: Thu Jul 12, 2018 2:11 pm
by n8b
I cannot test as tl-wdr4300 is no longer part of the build :?

Re: 1.11.x gargoyle-ispy 2018-July-12 06:01

Posted: Thu Jul 12, 2018 3:36 pm
by ispyisail
n8b wrote:I cannot test as tl-wdr4300 is no longer part of the build :?
I have a tl-wdr4300 in a production network :(

I'm thinking of replacing as its getting long in the tooth.

Re: 1.11.x gargoyle-ispy 2018-July-12 06:01

Posted: Thu Jul 12, 2018 3:39 pm
by ispyisail
I've now put this build in a production network (my home) and its working fantastic.

The network is snappy and fast

Enabled QOS (default with 8.8.8.8)

TOR seams to work as expected

USB thumb drives works as expected

OpenVPN works as expected

Just works so far

Re: 1.11.x gargoyle-ispy 2018-July-12 06:01

Posted: Thu Jul 12, 2018 4:54 pm
by Lantis
The bandwidth monitoring, qos, quotas, most of the GUI etc etc etc would need massive overhauls to support ipv6. It isn’t just flicking a switch unfortunately.

The wdr4300 image isn’t producing because it is too big.
It might come back when ipv6 components are removed.

Re: 1.11.x gargoyle-ispy 2018-July-12 06:01

Posted: Thu Jul 12, 2018 4:56 pm
by edu
n8b wrote:I cannot test as tl-wdr4300 is no longer part of the build :?
Uh Oh? EoL to my beloved 4300? C'mon ispy!