Bleeding Edge (mvebu + AR71xx) gargoyle-ispy 2018-June-29 22:45

Want to share your OpenWrt / Gargoyle knowledge? Implemented a new feature? Let us know here.

Moderator: Moderators

ispyisail
Moderator
Posts: 4809
Joined: Mon Apr 06, 2009 3:15 am
Location: New Zealand

Bleeding Edge (mvebu + AR71xx) gargoyle-ispy 2018-June-29 22:45

Post by ispyisail »

USE AT YOUR OWN RISK

WARNING: DO NOT PRESERVE SETTINGS

Now includes packages

Do not install on 4MB routers

1.11.x

gargoyle-ispy 2018-June-29 22:45
https://goo.gl/9SvSU9

Routers
https://goo.gl/9JmMKs

ispyisail
Moderator
Posts: 4809
Joined: Mon Apr 06, 2009 3:15 am
Location: New Zealand

Re: Bleeding Edge (mvebu + AR71xx) gargoyle-ispy 2018-June-29 22:45

Post by ispyisail »

I have the same problem with my C7 with this build.

Only the default programs are being installed

Something to do with the build process?

Lantis
Moderator
Posts: 5521
Joined: Mon Jan 05, 2015 5:33 am
Location: Australia

Re: Bleeding Edge (mvebu + AR71xx) gargoyle-ispy 2018-June-29 22:45

Post by Lantis »

To clarify, what make command are you running?
http://lantisproject.com/downloads/gargoyle_ispyisail.php for the latest releases
Please be respectful when posting. I do this in my free time on a volunteer basis.

ispyisail
Moderator
Posts: 4809
Joined: Mon Apr 06, 2009 3:15 am
Location: New Zealand

Re: Bleeding Edge (mvebu + AR71xx) gargoyle-ispy 2018-June-29 22:45

Post by ispyisail »

Code: Select all

make FULL_BUILD=true ar71xx


Code: Select all

make FULL_BUILD=true mvebu

ispyisail
Moderator
Posts: 4809
Joined: Mon Apr 06, 2009 3:15 am
Location: New Zealand

Re: Bleeding Edge (mvebu + AR71xx) gargoyle-ispy 2018-June-29 22:45

Post by ispyisail »

I'm also using Ubuntu 16.04

What OS do you use?

Lantis
Moderator
Posts: 5521
Joined: Mon Jan 05, 2015 5:33 am
Location: Australia

Re: Bleeding Edge (mvebu + AR71xx) gargoyle-ispy 2018-June-29 22:45

Post by Lantis »

Ubuntu 18.04
There may be an issue with multi profile builds. I’ll try to investigate.
http://lantisproject.com/downloads/gargoyle_ispyisail.php for the latest releases
Please be respectful when posting. I do this in my free time on a volunteer basis.

n8b
Posts: 70
Joined: Wed Sep 16, 2015 1:20 pm
Location: Denmark

Re: Bleeding Edge (mvebu + AR71xx) gargoyle-ispy 2018-June-29 22:45

Post by n8b »

Thanks for the build! :D

On a tl-wdr4300 v1.6 the packages kmod-usb-net-cdc-ether and usb-modeswitch are missing so when I plug in a Huawei E3372 it is not recognized.

I only get:

Code: Select all

Fri Jun  1 21:11:18 2018 kern.info kernel: [  481.444080] usb 1-1.2: new high-speed USB device number 3 using ehci-platform


In latest 1.10.X build I get this when plugging in the E3372:

Code: Select all

Sat Mar 24 16:00:24 2018 kern.info kernel: [  613.460000] usb 1-1.2: new high-speed USB device number 5 using ehci-platform
Sat Mar 24 16:00:24 2018 kern.info kernel: [  613.600000] usb-storage 1-1.2:1.0: USB Mass Storage device detected
Sat Mar 24 16:00:24 2018 kern.info kernel: [  613.620000] scsi host2: usb-storage 1-1.2:1.0
Sat Mar 24 16:00:25 2018 kern.info kernel: [  614.240000] usb 1-1.2: USB disconnect, device number 5
Sat Mar 24 16:00:25 2018 kern.info kernel: [  614.740000] usb 1-1.2: new high-speed USB device number 6 using ehci-platform
Sat Mar 24 16:00:26 2018 kern.info kernel: [  615.030000] cdc_ether 1-1.2:1.0 eth1: register 'cdc_ether' at usb-ehci-platform-1.2, CDC Ethernet Device, 0c:5b:8f:27:9a:64
Sat Mar 24 16:00:26 2018 kern.info kernel: [  615.050000] usb-storage 1-1.2:1.2: USB Mass Storage device detected
Sat Mar 24 16:00:26 2018 kern.info kernel: [  615.060000] scsi host3: usb-storage 1-1.2:1.2
Sat Mar 24 16:00:27 2018 kern.notice kernel: [  616.060000] scsi 3:0:0:0: Direct-Access     HUAWEI   TF CARD Storage  2.31 PQ: 0 ANSI: 2
Sat Mar 24 16:00:27 2018 kern.notice kernel: [  616.070000] sd 3:0:0:0: [sda] Attached SCSI removable disk
Sat Mar 24 16:00:28 2018 daemon.err block: Unkown action change
Sat Mar 24 16:00:29 2018 daemon.err block: Unkown action change

and in 'Connect Via' I can select USB Modem (HiLink, RNDIS)

Lantis
Moderator
Posts: 5521
Joined: Mon Jan 05, 2015 5:33 am
Location: Australia

Re: Bleeding Edge (mvebu + AR71xx) gargoyle-ispy 2018-June-29 22:45

Post by Lantis »

I think i understand what is going wrong with the multi-profile builds. I'm testing now. I'll upload my images when it is done for people to test if they contain everything.
http://lantisproject.com/downloads/gargoyle_ispyisail.php for the latest releases
Please be respectful when posting. I do this in my free time on a volunteer basis.

Lantis
Moderator
Posts: 5521
Joined: Mon Jan 05, 2015 5:33 am
Location: Australia

Re: Bleeding Edge (mvebu + AR71xx) gargoyle-ispy 2018-June-29 22:45

Post by Lantis »

Please find my images here for testing:
http://lantisproject.com/gargoyle_custom/ar71xx-1.11.x/

These should now contain the correct packages (i have only tested on a WNDR3800 which is usb_large).

@ispy
https://github.com/ericpaulbishop/gargo ... eb6c109b53
I believe this is what fixed it.
However i also had to put an additional patch in the mix to stop the ar71xx builds from crashing, and i am surprised that you did not encounter it.
http://lantisproject.com/downloads/gargoyle_ispyisail.php for the latest releases
Please be respectful when posting. I do this in my free time on a volunteer basis.

Lantis
Moderator
Posts: 5521
Joined: Mon Jan 05, 2015 5:33 am
Location: Australia

Re: Bleeding Edge (mvebu + AR71xx) gargoyle-ispy 2018-June-29 22:45

Post by Lantis »

I want to know what routers people want to see supported in 1.11.x.
Which routers are we missing from the targets we already support that are popular and you want to see support for? This is relatively easy for me to add. If anyone sends a suggestion for a router with 4MB of flash i'll throw something at them. :lol:
ar71xx, brcm47xx, mvebu, ramips

Which targets are popular that aren't already supported and you think should be? This is harder for me to do as i can't test it. But there's some things worth doing as they are popular models.
ipq806x
http://lantisproject.com/downloads/gargoyle_ispyisail.php for the latest releases
Please be respectful when posting. I do this in my free time on a volunteer basis.

Post Reply