Next bleeding edge testers wanted

Want to share your OpenWrt / Gargoyle knowledge? Implemented a new feature? Let us know here.

Moderator: Moderators

User avatar
labou
Posts: 15
Joined: Mon Feb 05, 2018 6:55 pm
Contact:

Re: Next bleeding edge testers wanted

Post by labou »

I upgraded on Archer C7 v2 with no problem using the factory-us.bin without preserving settings. I haven't run into any problems yet, but I'll post an update on anything that might come up. Thanks!
TP-Link Archer C7 v2
Linksys WRT1200AC

n8b
Posts: 70
Joined: Wed Sep 16, 2015 1:20 pm
Location: Denmark

Re: Next bleeding edge testers wanted

Post by n8b »

Plugin page:
plugin sources are called %n_base, %n_management and so on.
Earlier it was chaos_calmer_base but you moved on ;)

Packages kmod-usb-net-cdc-ether and usb-modeswitch are missing so when I plug in a Huawei E3372 it is not recognized.


When enabling and saving a quota I get iptables error:

Code: Select all

Thu Mar 29 21:25:50 2018 daemon.err insmod: module is already loaded - sch_prio
Thu Mar 29 21:25:50 2018 daemon.err insmod: module is already loaded - sch_tbf
Thu Mar 29 21:25:50 2018 daemon.err insmod: module is already loaded - cls_fw
Thu Mar 29 21:25:50 2018 kern.info kernel: [72137.228158] IMQ driver unloaded successfully.
Thu Mar 29 21:25:50 2018 kern.warn kernel: [72137.263617] imq: unknown parameter 'hook_chains' ignored
Thu Mar 29 21:25:50 2018 kern.warn kernel: [72137.269134] imq: unknown parameter 'hook_tables' ignored
Thu Mar 29 21:25:50 2018 kern.info kernel: [72137.276044]       Hooked IMQ after mangle on PREROUTING
Thu Mar 29 21:25:50 2018 kern.info kernel: [72137.280980]       Hooked IMQ after nat on POSTROUTING
Thu Mar 29 21:25:50 2018 kern.info kernel: [72137.285668] IMQ driver loaded successfully. (numdevs = 1, numqueues = 1, imq_dev_accurate_stats = 1)
Thu Mar 29 21:25:50 2018 kern.info kernel: [72137.294979]       Hooking IMQ before NAT on PREROUTING.
Thu Mar 29 21:25:50 2018 kern.info kernel: [72137.299852]       Hooking IMQ after NAT on POSTROUTING.
Thu Mar 29 21:25:50 2018 daemon.err uhttpd[1513]: iptables v1.6.2: unknown option "--todev"
Thu Mar 29 21:25:50 2018 daemon.err uhttpd[1513]: Try `iptables -h' or 'iptables --help' for more information.
Without quota I get 54 / 54 Mbit in speedtest.
With below qouta I get 54 / 2 Mbit in speedtest (Download is not throttled as expected)

Max Upload: Unlimited
Max Download: Unlimited
Max Total Up+Down: 0.1 MBytes
Quota Resets: Every Day
Reset Hour: 00:00
Quota Is Active: Always
When Exceeded: Throttle Bandwith
Upload Limit: 200 kBytes/s
Download Limit: 400 kBytes/s

With same quota on my main router (wrt1200ac on 1.10.X) I get 3.1 / 1.8 Mbit in speedtest. (Both UL and DL are throttled)

Thanks!

n8b
Posts: 70
Joined: Wed Sep 16, 2015 1:20 pm
Location: Denmark

Re: Next bleeding edge testers wanted

Post by n8b »

Flashed from this build back to latest (20180324) 1.10.X build without issues.
I have re-tested my findings now on 1.10.X:

On 1.10.X I also see the DDNS error right after boot and also these when making changes on Connection | Basic:
daemon.err uhttpd[1489]: uci: Entry not found
daemon.err uhttpd[1489]: uci: Invalid argument
daemon.err uhttpd[1489]: ls: /sys/bus/mdio_bus/drivers/Marvell*/0:*: No such file or directory

So these errors in system log is not unique to this first 1.11.X build.

(Quota, backup and Huawei E3372 works OK in 1.10.X but not in 1.11.X)

phgerin
Posts: 130
Joined: Sun Dec 21, 2014 2:03 pm

Re: Next bleeding edge testers wanted

Post by phgerin »

miniupnpd reports wrong external address for bandwidth monitoring (should reports local lan address 192.168.1.1)

User avatar
labou
Posts: 15
Joined: Mon Feb 05, 2018 6:55 pm
Contact:

Re: Next bleeding edge testers wanted

Post by labou »

I'm running into an issue when connected to the 2.4 GHz band on the Archer C7 v2. When connected to it I get regular timeouts when pinging the router (nearly 60/40 reply/timeouts) and my download speeds which are usually around 3.8 MB/s get limited to around 300 kB/s.

Once I switch to the 5 GHz band everything is more or less okay again except every 10 minutes or so I'll lose connection to the router and the internet (although not the wifi). The timeouts will last about 30 seconds then it'll be back to normal. That all seems to happen more often when I'm downloading something.

Here are the log results if it is of any use

https://pastebin.com/0dwbPZ9D
TP-Link Archer C7 v2
Linksys WRT1200AC

Lantis
Moderator
Posts: 6735
Joined: Mon Jan 05, 2015 5:33 am
Location: Australia

Re: Next bleeding edge testers wanted

Post by Lantis »

phgerin wrote:miniupnpd reports wrong external address for bandwidth monitoring (should reports local lan address 192.168.1.1)
Can you please provide more detail? I could not replicate this.
How are you testing it.
http://lantisproject.com/downloads/gargoyle_ispyisail.php for the latest releases
Please be respectful when posting. I do this in my free time on a volunteer basis.

phgerin
Posts: 130
Joined: Sun Dec 21, 2014 2:03 pm

Re: Next bleeding edge testers wanted

Post by phgerin »

Lantis wrote:
phgerin wrote:miniupnpd reports wrong external address for bandwidth monitoring (should reports local lan address 192.168.1.1)
Can you please provide more detail? I could not replicate this.
How are you testing it.

I use Peakhour (https://peakhourapp.com) software on Mac to monitor my routers.
It used to work with LEDE and previous Gargoyle builds.
But it doesnt work with this build. The software see the router and its external IP address.

Edit: I checked with another software on Windows (networx) and it seems to work.

francisuk1989
Posts: 30
Joined: Thu Sep 24, 2015 4:46 am
Location: United Kingdom
Contact:

Re: Next bleeding edge testers wanted

Post by francisuk1989 »

phgerin wrote:Upgraded wdr3600 from LEDE to Gargoyle using the factory image, did not preserve settings.
Everything is working great for now, testing.

Unable to add snmpd via command line:

root@Gargoyle:~# opkg update
Downloading package list for %n_routing source...
Package list for %n_routing downloaded successfully.
root@Gargoyle:~# opkg install snmpd
ERROR: No package named snmpd found, try updating your package lists

Edit: Thanks once again !
is not in the repos :? https://downloads.openwrt.org/snapshots ... /packages/ if you get the time, you could ask here and report any bugs or features https://bugs.openwrt.org

Also with your wdr3600 do you get the 2.4GHz channels from 1-13 (if your European of course?) seem like v1.10.0 im only getting 1-11 :roll:
TP-Link TL-WDR3600 v1.5 (ar71xx)
EE Brightbox 1/Arcadyan AR7516 (BCM63xx)
MK RB750r2 - OpenWrt Snapshot ar71xx
D-Link DIR-615 D2 - OpenWrt (ramips/rt305x)
AWS Region Latency Checker # http://awsspeedtest.xvf.dk

phgerin
Posts: 130
Joined: Sun Dec 21, 2014 2:03 pm

Re: Next bleeding edge testers wanted

Post by phgerin »

francisuk1989 wrote: Also with your wdr3600 do you get the 2.4GHz channels from 1-13 (if your European of course?) seem like v1.10.0 im only getting 1-11 :roll:
Yes, only channels 1 to 11.

Edit: after turning off and on the Wifi, the router entered a reboot loop.
Last edited by phgerin on Sat Mar 31, 2018 11:18 am, edited 1 time in total.

francisuk1989
Posts: 30
Joined: Thu Sep 24, 2015 4:46 am
Location: United Kingdom
Contact:

Re: Next bleeding edge testers wanted

Post by francisuk1989 »

phgerin wrote:
francisuk1989 wrote: Also with your wdr3600 do you get the 2.4GHz channels from 1-13 (if your European of course?) seem like v1.10.0 im only getting 1-11 :roll:
Yes, only channels 1 to 11.
@Lantis could we get a fix for this?
As i believe america uses 1-11, and the rest are using 1-13

5GHz band i no idea but from my own ISP modem combo i can see channels 36,40,44,48,52,56,60,64,100,104,108,112,116,132,136,140 @ 20 / 40 / 80MHz
TP-Link TL-WDR3600 v1.5 (ar71xx)
EE Brightbox 1/Arcadyan AR7516 (BCM63xx)
MK RB750r2 - OpenWrt Snapshot ar71xx
D-Link DIR-615 D2 - OpenWrt (ramips/rt305x)
AWS Region Latency Checker # http://awsspeedtest.xvf.dk

Post Reply