gargoyle-ispy 2017-May-25 01:27.torrent

[ispyisail]

USE AT YOUR OWN RISK

WARNING: DO NOT PRESERVE SETTINGS

Now includes packages

Do not install on 4MB routers

gargoyle-ispy 2017-May-25 01:27.torrent
https://goo.gl/IdpGyg

magnet:?xt=urn:btih:694282dc73cffccb2d622a88535824dfab6474e9&dn=gargoyle-ispy%202017-May-25%2001_27.7z&tr=udp%3a%2f%2ftracker.openbittorrent.com%3a80&tr=udp%3a%2f%2fopen.demonii.com%3a1337&tr=udp%3a%2f%2ftracker.coppersurfer.tk%3a6969&tr=udp%3a%2f%2ftracker.leechers-paradise.org%3a6969

Routers
https://goo.gl/2lxSjg

package/plugin-gargoyle-i18n-German-DE/files/www/i18n/German-DE/login.js

Update regdb to latest

[mojolacerator]

Would this release have the new wireless drivers for the "WRT" series?

[apvm]

WRT1900AC V2, back to stock firmware and flashed this version. Re-enter all configuration, DHCP, pppoe, wifi and Mac address filtering. Everything works fine except I have to reboot modem to get internet working.

One question, can I load previous configuration setting files to this version. ie configuration back up file from 4/15 to 5/25?

By the way, Thank you very much for the hard work.

[Lantis]

No to the latest drivers.
They can't easily be back built anymore.

And yes you should be able to restore that config.

[quynhnt]

Flashed this release on Buffalo WZR-AG300NH & everything work fine but I cannot make transmission work as I config it as 1.9.1 release. Anw, thanks for your great effort.

[ektus]

Trying to upgrade my TP-Link Archer C5 running 1.9.X (Built 20170224-0007 git@c4cb5d5), preserving settings. There is no error message, and the router reboots, but afterwards the system reports the very same version. It's still running, transmission and all, but shouldn't it report a newer build date?

I'm running transmission on that router to download and host the gargoyle-ispy archives. In order to have space for this, I'm running in Extroot mode. Is this interfering with the update, or is there another problem?

Regards
Ektus.

[Lantis]

Can you try killing transmission first? Could be an out of memory issue

[ektus]

Can you try killing transmission first? Could be an out of memory issue

I'd say that's unlikely:
Memory Usage:42.5MB / 123.1MB (34.5%)
Swap Memory Usage:0MB / 1191.9MB (0%)

There's a 128GB USB stick attached, and lots of space free:

Code: Select all

df
Filesystem           1K-blocks      Used Available Use% Mounted on
rootfs               118878804   5790372 107026644   5% /
/dev/root                 6400      6400         0 100% /rom
tmpfs                    63040       656     62384   1% /tmp
/dev/sda1            118878804   5790372 107026644   5% /overlay
overlayfs:/overlay   118878804   5790372 107026644   5% /
tmpfs                      512         0       512   0% /dev

Here's the output of dmesg:

Code: Select all

root@Archer-Gargoyle:~# dmesg
[    0.000000] Linux version 3.18.45 (user@Linux) (gcc version 4.8.3 (OpenWrt/Linaro GCC 4.8-2014.04 r49389) ) #3 Fri Feb 24 17:12:25 NZDT 2017
[    0.000000] MyLoader: sysp=07236400, boardp=a2c08c00, parts=64f14006
[    0.000000] bootconsole [early0] enabled
[    0.000000] CPU0 revision is: 00019750 (MIPS 74Kc)
[    0.000000] SoC: Qualcomm Atheros QCA9558 ver 1 rev 0
[    0.000000] Determined physical RAM map:
[    0.000000]  memory: 08000000 @ 00000000 (usable)
[    0.000000] Initrd not found or empty - disabling initrd
[    0.000000] Zone ranges:
[    0.000000]   Normal   [mem 0x00000000-0x07ffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00000000-0x07ffffff]
[    0.000000] Initmem setup node 0 [mem 0x00000000-0x07ffffff]
[    0.000000] On node 0 totalpages: 32768
[    0.000000] free_area_init_node: node 0, pgdat 80369df0, node_mem_map 81000000
[    0.000000]   Normal zone: 256 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 32768 pages, LIFO batch:7
[    0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
[    0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
[    0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[    0.000000] pcpu-alloc: [0] 0
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 32512
[    0.000000] Kernel command line:  board=ARCHER-C5  console=ttyS0,115200 rootfstype=squashfs,jffs2 noinitrd
[    0.000000] PID hash table entries: 512 (order: -1, 2048 bytes)
[    0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
[    0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
[    0.000000] Writing ErrCtl register=00000000
[    0.000000] Readback ErrCtl register=00000000
[    0.000000] Memory: 125856K/131072K available (2537K kernel code, 144K rwdata, 540K rodata, 224K init, 188K bss, 5216K reserved)
[    0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] NR_IRQS:51
[    0.000000] Clocks: CPU:720.000MHz, DDR:600.000MHz, AHB:200.000MHz, Ref:40.000MHz
[    0.000000] Calibrating delay loop... 358.80 BogoMIPS (lpj=1794048)
[    0.060000] pid_max: default: 32768 minimum: 301
[    0.060000] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.070000] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.070000] NET: Registered protocol family 16
[    0.080000] MIPS: machine is TP-LINK Archer C5
[    0.080000] ar724x-pci ar724x-pci.0: PCIe link is down
[    0.090000] registering PCI controller with io_map_base unset
[    0.090000] registering PCI controller with io_map_base unset
[    0.540000] PCI host bridge to bus 0000:00
[    0.550000] pci_bus 0000:00: root bus resource [mem 0x10000000-0x11ffffff]
[    0.550000] pci_bus 0000:00: root bus resource [io  0x0000]
[    0.560000] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
[    0.560000] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 00
[    0.560000] PCI host bridge to bus 0000:01
[    0.570000] pci_bus 0000:01: root bus resource [mem 0x12000000-0x13ffffff]
[    0.570000] pci_bus 0000:01: root bus resource [io  0x0001]
[    0.580000] pci_bus 0000:01: No busn resource found for root bus, will use [bus 01-ff]
[    0.580000] pci 0000:01:00.0: [168c:003c] type 00 class 0x028000
[    0.580000] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x001fffff 64bit]
[    0.580000] pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref]
[    0.580000] pci 0000:01:00.0: supports D1 D2
[    0.580000] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
[    0.580000] pci 0000:01:00.0: BAR 0: assigned [mem 0x12000000-0x121fffff 64bit]
[    0.590000] pci 0000:01:00.0: BAR 6: assigned [mem 0x12200000-0x1220ffff pref]
[    0.590000] pci 0000:01:00.0: using irq 41 for pin 1
[    0.600000] Switched to clocksource MIPS
[    0.600000] NET: Registered protocol family 2
[    0.610000] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
[    0.610000] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
[    0.620000] TCP: Hash tables configured (established 1024 bind 1024)
[    0.630000] TCP: reno registered
[    0.630000] UDP hash table entries: 256 (order: 0, 4096 bytes)
[    0.640000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[    0.640000] NET: Registered protocol family 1
[    0.650000] PCI: CLS 0 bytes, default 32
[    0.650000] futex hash table entries: 256 (order: -1, 3072 bytes)
[    0.660000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.670000] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[    0.680000] msgmni has been set to 245
[    0.680000] io scheduler noop registered
[    0.690000] io scheduler deadline registered (default)
[    0.690000] Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled
[    0.700000] console [ttyS0] disabled
[    0.720000] serial8250.0: ttyS0 at MMIO 0x18020000 (irq = 11, base_baud = 2500000) is a 16550A
[    0.730000] console [ttyS0] enabled
[    0.740000] bootconsole [early0] disabled
[    0.750000] m25p80 spi0.0: found w25q128, expected m25p80
[    0.760000] m25p80 spi0.0: w25q128 (16384 Kbytes)
[    0.760000] 5 tp-link partitions found on MTD device spi0.0
[    0.770000] Creating 5 MTD partitions on "spi0.0":
[    0.770000] 0x000000000000-0x000000020000 : "u-boot"
[    0.780000] 0x000000020000-0x00000013bd44 : "kernel"
[    0.780000] 0x00000013bd44-0x000000ff0000 : "rootfs"
[    0.790000] mtd: device 2 (rootfs) set to be root filesystem
[    0.790000] 1 squashfs-split partitions found on MTD device rootfs
[    0.800000] 0x000000780000-0x000000ff0000 : "rootfs_data"
[    0.810000] 0x000000ff0000-0x000001000000 : "art"
[    0.810000] 0x000000020000-0x000000ff0000 : "firmware"
[    0.840000] switch0: Atheros AR8327 rev. 4 switch registered on ag71xx-mdio.0
[    0.930000] libphy: ag71xx_mdio: probed
[    1.530000] ag71xx ag71xx.0: connected to PHY at ag71xx-mdio.0:00 [uid=004dd034, driver=Atheros AR8216/AR8236/AR8316]
[    1.540000] eth0: Atheros AG71xx at 0xb9000000, irq 4, mode:RGMII
[    2.130000] eth1: Atheros AG71xx at 0xba000000, irq 5, mode:SGMII
[    2.130000] TCP: cubic registered
[    2.140000] NET: Registered protocol family 17
[    2.140000] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
[    2.150000] Bridge firewalling registered
[    2.160000] 8021q: 802.1Q VLAN Support v1.8
[    2.170000] VFS: Mounted root (squashfs filesystem) readonly on device 31:2.
[    2.180000] Freeing unused kernel memory: 224K (80388000 - 803c0000)
[    3.370000] init: Console is alive
[    3.380000] init: - watchdog -
[    5.870000] usbcore: registered new interface driver usbfs
[    5.880000] usbcore: registered new interface driver hub
[    5.880000] usbcore: registered new device driver usb
[    5.920000] SCSI subsystem initialized
[    5.930000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    5.930000] ehci-platform: EHCI generic platform driver
[    5.940000] ehci-platform ehci-platform.0: EHCI Host Controller
[    5.950000] ehci-platform ehci-platform.0: new USB bus registered, assigned bus number 1
[    5.960000] ehci-platform ehci-platform.0: TX-TX IDP fix enabled
[    5.960000] ehci-platform ehci-platform.0: irq 48, io mem 0x1b000000
[    5.990000] ehci-platform ehci-platform.0: USB 2.0 started, EHCI 1.00
[    5.990000] hub 1-0:1.0: USB hub found
[    6.000000] hub 1-0:1.0: 1 port detected
[    6.000000] ehci-platform ehci-platform.1: EHCI Host Controller
[    6.010000] ehci-platform ehci-platform.1: new USB bus registered, assigned bus number 2
[    6.020000] ehci-platform ehci-platform.1: TX-TX IDP fix enabled
[    6.020000] ehci-platform ehci-platform.1: irq 49, io mem 0x1b400000
[    6.050000] ehci-platform ehci-platform.1: USB 2.0 started, EHCI 1.00
[    6.050000] hub 2-0:1.0: USB hub found
[    6.060000] hub 2-0:1.0: 1 port detected
[    6.060000] usbcore: registered new interface driver usb-storage
[    6.380000] usb 2-1: new high-speed USB device number 2 using ehci-platform
[    6.390000] init: - preinit -
[    6.620000] usb-storage 2-1:1.0: USB Mass Storage device detected
[    6.620000] scsi host0: usb-storage 2-1:1.0
[    7.370000] eth1: link up (1000Mbps/Full duplex)
[    7.390000] random: procd urandom read with 12 bits of entropy available
[    7.630000] scsi 0:0:0:0: Direct-Access     SanDisk  Cruzer Blade     1.27 PQ: 0 ANSI: 6
[    7.640000] sd 0:0:0:0: [sda] 244260864 512-byte logical blocks: (125 GB/116 GiB)
[    7.650000] sd 0:0:0:0: [sda] Write Protect is off
[    7.650000] sd 0:0:0:0: [sda] Mode Sense: 43 00 00 00
[    7.650000] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[    7.670000]  sda: sda1 sda2
[    7.680000] sd 0:0:0:0: [sda] Attached SCSI removable disk
[   10.630000] mount_root: loading kmods from internal overlay
[   11.080000] jffs2: notice: (426) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
[   11.090000] block: attempting to load /tmp/jffs_cfg/upper/etc/config/fstab
[   15.000000] EXT4-fs (sda1): recovery complete
[   15.000000] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts:
[   15.020000] mount_root: switched to extroot
[   15.070000] eth1: link down
[   15.080000] procd: - early -
[   15.090000] procd: - watchdog -
[   15.830000] procd: - ubus -
[   16.840000] procd: - init -
[   18.150000] RPC: Registered named UNIX socket transport module.
[   18.150000] RPC: Registered udp transport module.
[   18.160000] RPC: Registered tcp transport module.
[   18.160000] RPC: Registered tcp NFSv4.1 backchannel transport module.
[   18.180000] tun: Universal TUN/TAP device driver, 1.6
[   18.190000] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[   18.200000] gre: GRE over IPv4 demultiplexor driver
[   18.200000] ip_gre: GRE over IPv4 tunneling driver
[   18.230000] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[   18.250000] nf_conntrack version 0.5.0 (1970 buckets, 7880 max)
[   18.260000]  Hooked IMQ after mangle on PREROUTING
[   18.270000]  Hooked IMQ after nat on POSTROUTING
[   18.270000] IMQ driver loaded successfully. (numdevs = 2, numqueues = 1, imq_dev_accurate_stats = 1)
[   18.280000]  Hooking IMQ before NAT on PREROUTING.
[   18.290000]  Hooking IMQ after NAT on POSTROUTING.
[   18.290000] Netfilter messages via NETLINK v0.30.
[   18.300000] ip_set: protocol 6
[   18.330000] Loading modules backported from Linux version v4.4-rc5-1913-gc8fdf68
[   18.340000] Backport generated by backports.git backports-20151218-0-g2f58d9d
[   18.440000] PCI: Enabling device 0000:01:00.0 (0000 -> 0002)
[   18.440000] ath10k_pci 0000:01:00.0: pci irq legacy interrupts 0 irq_mode 0 reset_mode 0
[   18.660000] random: nonblocking pool is initialized
[   18.800000] ath10k_pci 0000:01:00.0: qca988x hw2.0 target 0x4100016c chip_id 0x043202ff sub 0000:0000
[   18.810000] ath10k_pci 0000:01:00.0: kconfig debug 0 debugfs 1 tracing 0 dfs 1 testmode 1
[   18.820000] ath10k_pci 0000:01:00.0: firmware ver 10.2.4.97 api 5 features no-p2p crc32 f91e34f2
[   18.870000] ath10k_pci 0000:01:00.0: Direct firmware load for ath10k/QCA988X/hw2.0/board-2.bin failed with error -2
[   18.880000] ath10k_pci 0000:01:00.0: Falling back to user helper
[   21.860000] Adding 1220604k swap on /dev/sda2.  Priority:-1 extents:1 across:1220604k
[   22.900000] Adding 1220604k swap on /dev/sda2.  Priority:-1 extents:1 across:1220604k
[   23.940000] Adding 1220604k swap on /dev/sda2.  Priority:-1 extents:1 across:1220604k
[   24.560000] firmware ath10k!QCA988X!hw2.0!board-2.bin: firmware_loading_store: map pages failed
[   24.590000] ath10k_pci 0000:01:00.0: board_file api 1 bmi_id N/A crc32 bebc7c08
[   25.650000] ath10k_pci 0000:01:00.0: htt-ver 2.1 wmi-op 5 htt-op 2 cal file max-sta 128 raw 0 hwcrypto 1
[   25.760000] ath: EEPROM regdomain: 0x0
[   25.760000] ath: EEPROM indicates default country code should be used
[   25.760000] ath: doing EEPROM country->regdmn map search
[   25.760000] ath: country maps to regdmn code: 0x3a
[   25.760000] ath: Country alpha2 being used: US
[   25.760000] ath: Regpair used: 0x3a
[   25.780000] u32 classifier
[   25.780000]     input device check on
[   25.790000]     Actions configured
[   25.800000] Mirror/redirect action on
[   25.860000] fuse init (API version 7.23)
[   25.900000] usbcore: registered new interface driver cdc_acm
[   25.900000] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[   25.910000] usbcore: registered new interface driver cdc_wdm
[   25.960000] Ebtables v2.0 registered
[   25.960000] ip_tables: (C) 2000-2006 Netfilter Core Team
[   26.060000] usbcore: registered new interface driver ums-alauda
[   26.070000] usbcore: registered new interface driver ums-cypress
[   26.080000] usbcore: registered new interface driver ums-datafab
[   26.100000] usbcore: registered new interface driver ums-freecom
[   26.100000] usbcore: registered new interface driver ums-isd200
[   26.110000] usbcore: registered new interface driver ums-jumpshot
[   26.120000] usbcore: registered new interface driver ums-karma
[   26.130000] usbcore: registered new interface driver ums-sddr09
[   26.140000] usbcore: registered new interface driver ums-sddr55
[   26.150000] usbcore: registered new interface driver ums-usbat
[   26.160000] usbcore: registered new interface driver usblp
[   26.180000] usbcore: registered new interface driver usbserial
[   26.190000] usbcore: registered new interface driver usbserial_generic
[   26.190000] usbserial: USB Serial support registered for generic
[   26.250000] xt_time: kernel timezone is -0000
[   26.260000] usbcore: registered new interface driver cdc_ether
[   26.270000] usbcore: registered new interface driver cdc_ncm
[   26.280000] usbcore: registered new interface driver huawei_cdc_ncm
[   26.310000] PPP generic driver version 2.4.2
[   26.320000] PPP MPPE Compression module registered
[   26.320000] NET: Registered protocol family 24
[   26.330000] PPTP driver version 0.8.5
[   26.340000] usbcore: registered new interface driver qmi_wwan
[   26.350000] usbcore: registered new interface driver rndis_host
[   26.360000] usbcore: registered new interface driver sierra
[   26.360000] usbserial: USB Serial support registered for Sierra USB modem
[   26.370000] usbcore: registered new interface driver sierra_net
[   26.400000] ath: EEPROM regdomain: 0x0
[   26.400000] ath: EEPROM indicates default country code should be used
[   26.400000] ath: doing EEPROM country->regdmn map search
[   26.400000] ath: country maps to regdmn code: 0x3a
[   26.400000] ath: Country alpha2 being used: US
[   26.400000] ath: Regpair used: 0x3a
[   26.420000] ieee80211 phy1: Selected rate control algorithm 'minstrel_ht'
[   26.420000] ieee80211 phy1: Atheros AR9550 Rev:0 mem=0xb8100000, irq=47
[   26.430000] usbcore: registered new interface driver cdc_mbim
[   26.440000] usbcore: registered new interface driver option
[   26.450000] usbserial: USB Serial support registered for GSM modem (1-port)
[   26.460000] usbcore: registered new interface driver qcserial
[   26.470000] usbserial: USB Serial support registered for Qualcomm USB modem
[   35.270000] eth1: link up (1000Mbps/Full duplex)
[   35.310000] device eth1 entered promiscuous mode
[   35.420000] br-lan: port 1(eth1) entered forwarding state
[   35.420000] br-lan: port 1(eth1) entered forwarding state
[   37.420000] br-lan: port 1(eth1) entered forwarding state
[   37.560000] eth0: link up (1000Mbps/Full duplex)
[   39.670000] Atheros AR8216/AR8236/AR8316 ag71xx-mdio.0:00: Port 2 is up
[   39.670000] Atheros AR8216/AR8236/AR8316 ag71xx-mdio.0:00: Port 3 is up
[   39.680000] Atheros AR8216/AR8236/AR8316 ag71xx-mdio.0:00: Port 4 is up
[   41.180000] device wlan1-1 entered promiscuous mode
[   41.190000] br-lan: port 2(wlan1-1) entered forwarding state
[   41.200000] br-lan: port 2(wlan1-1) entered forwarding state
[   41.200000] br-lan: port 2(wlan1-1) entered disabled state
[   41.230000] device wlan0 entered promiscuous mode
[   42.570000] br-lan: port 3(wlan0) entered forwarding state
[   42.570000] br-lan: port 3(wlan0) entered forwarding state
[   43.010000] device wlan1 entered promiscuous mode
[   43.840000] wlan1: authenticate with e8:37:7a:3a:11:30
[   43.860000] wlan1: send auth to e8:37:7a:3a:11:30 (try 1/3)
[   43.870000] wlan1: authenticated
[   43.890000] wlan1: associate with e8:37:7a:3a:11:30 (try 1/3)
[   43.890000] wlan1: RX AssocResp from e8:37:7a:3a:11:30 (capab=0x411 status=0 aid=1)
[   43.900000] wlan1: associated
[   43.950000] br-wan: port 1(wlan1) entered forwarding state
[   43.950000] br-wan: port 1(wlan1) entered forwarding state
[   44.400000] br-lan: port 2(wlan1-1) entered forwarding state
[   44.410000] br-lan: port 2(wlan1-1) entered forwarding state
[   44.570000] br-lan: port 3(wlan0) entered forwarding state
[   45.370000] nf_conntrack: automatic helper assignment is deprecated and it will be removed soon. Use the iptables CT target to attach helpers instead.
[   45.950000] br-wan: port 1(wlan1) entered forwarding state
[   46.410000] br-lan: port 2(wlan1-1) entered forwarding state
[   84.290000] ipt_bandwidth: timezone shift of 120 minutes detected, adjusting
[   84.300000]                old minutes west=0, new minutes west=-120

Is there a way to obtain a log of the upgrade attempt?

Regards
Ektus.

[ektus]

Can you try killing transmission first? Could be an out of memory issue

Looks more like a problem with extroot.

I've been able to update to the build from June 14th, 2017 by following these steps:

1) Log in with SSH, issue reboot command (shutdown is missing)
2) Wait unil the LEDs go dark, unplug the USB stick
3) Boot the router from the internal drive
4) Update to the latest version, preserving settings.
5) Reboot. Plug the stick back in and reboot again.

It now reports "1.9.X (Built 20170613-1957 git@7cf7ad1)" and seems to be running normally.

Trying to flash the May 25 build with extroot active and June 14th running once again proved unsuccessful.

Regards
Ektus.