Gargoyle Forum

USE AT YOUR OWN RISK

WARNING: DO NOT PRESERVE SETTINGS

Do not install on 4MB routers

gargoyle-ispy 2017-January-19 10:47.torrent
https://goo.gl/vNPwr8

magnet:?xt=urn:btih:41d94e9ad20c4bb3669fa4ec3e1b0ed7b960c4f3&dn=gargoyle-ispy%202017-January-19%2010_47.7z&tr=udp%3a%2f%2ftracker.openbittorrent.com%3a80&tr=udp%3a%2f%2fopen.demonii.com%3a1337&tr=udp%3a%2f%2ftracker.coppersurfer.tk%3a6969&tr=udp%3a%2f%2ftracker.leechers-paradise.org%3a6969


Routers
https://goo.gl/96FvUS


Changes see
https://github.com/ericpaulbishop/gargo ... its/master

Fix adding new service class on QoS Upload overflowing table

cache_basic_vars.sh: fix channel's parsing for VHT160

Apply formatting to extroot div

Fix disk_format and extroot not showing in some cases

i18n/Polish: fix BOM for time.js

Unfortuantely this fix hasn't been merged yet
https://github.com/ericpaulbishop/gargoyle/pull/594

Flashed the factory.bin on a new TP-Link Archer C7 V2. No file rename, no tricks, just upload from the TP-Link GUI. Now to configure all the needed settings (mainly DHCP table)...

GUI glitch: The "Edit Static DHCP" popup window is too small.


I did enter a list of 10 devices, but when trying to save and apply the changes, there's only an error message
Looks like that is a result of the DHCP range preset being faulty, the last field in the "End DHCP range" entries reads "NaN".

Worked Great, and Awfull ... Thanks to Developers. +++1
but New interface has lake of themes.
Theme like LuCi opewrt Menu style will make it beautiful..
Can We Apply Horchata or Demantoid themes over it.That looks beautiful.
Or Any way to use older interface,
Or making New/Old interface As plugin Optional

Looking good so far on wndrmacv2.

Might this be a good time to add support in the UI for WAN DNS when configured for Static IP? It is not as if it's optional, you will find it in other firmware such as DD-WRT, and the workaround is obscure at best.

viewtopic.php?f=8&t=8852

ektus wrote:GUI glitch: The "Edit Static DHCP" popup window is too small.

Will fix

I did enter a list of 10 devices, but when trying to save and apply the changes, there's only an error message

Code: Select all

There is an error in End
Changes could not be applied

Looks like that is a result of the DHCP range preset being faulty, the last field in the "End DHCP range" entries reads "NaN".

This should work by default. That's a config corruption.
I'll double check it, but it hasn't changed in a long time.

sajjadhalai wrote:Worked Great, and Awfull ... Thanks to Developers. +++1
but New interface has lake of themes.
Theme like LuCi opewrt Menu style will make it beautiful..
Can We Apply Horchata or Demantoid themes over it.That looks beautiful.
Or Any way to use older interface,
Or making New/Old interface As plugin Optional

Old interface is gone. Not to return.

Old themes will be migrated slowly.
Dark-One is currently the only converted one, but none of the packages are updated yet.

You could apply the theme manually with copy paste.

rseiler wrote:Looking good so far on wndrmacv2.

Might this be a good time to add support in the UI for WAN DNS when configured for Static IP? It is not as if it's optional, you will find it in other firmware such as DD-WRT, and the workaround is obscure at best.

viewtopic.php?f=8&t=8852

I'll try and look into it

Lantis wrote:

ektus wrote: Looks like that is a result of the DHCP range preset being faulty, the last field in the "End DHCP range" entries reads "NaN".

This should work by default. That's a config corruption.
I'll double check it, but it hasn't changed in a long time.

IIRC the "NaN" was there from the beginning. I did connect the router to the 192.168.0.x network, installed Gargoyle (coming from stock), connected it to the 192.168.1.x network, changed password and IPs (both local and WAN to static), moved the router back to the 192.168.0.x network and went from there to add the DHCP list. It's working good now. Main reason was to be able to monitor bandwith usage, which works great. Will watch stability, but for the past couple hours there have been no faults.

Regards
Ektus.