Page 7 of 8
Re: gargoyle-ispy 2017-January-12 02:59.torrent
Posted: Tue Jan 17, 2017 11:11 am
by lilunxm12
Lantis wrote:lilunxm12 wrote:The "close and apply changes" button on QoS mini window doesn't work for me. The window won't close and the change wasn't saved either. Tested with Archer C7 V2, firefox 50.1, latest stable edge.
Edit: the "close and discard changes" button works as intended, just "close and apply changes" button is broken.
I can't replicate this behaviour. Works fine on my end.
Anyone else seeing this issue?
I digged it a little more and found that only the edit button for "QoS (Upload) -- Service Classes" is broken.
QoS (Upload) -- Classification Rules -OK
QoS (Download) -- Classification Rules -OK
QoS (Download) -- Service Classes - OK
Re: gargoyle-ispy 2017-January-12 02:59.torrent
Posted: Tue Jan 17, 2017 3:54 pm
by Lantis
Ok can confirm issue.
Will investigate.
Re: gargoyle-ispy 2017-January-12 02:59.torrent
Posted: Tue Jan 17, 2017 7:40 pm
by mojolacerator
Anybody with a WRT3200ACM:
The next ispyisail release will be totally functional.
Many thanks @ Gargoyle developers !!!
The best software on the best hardware !!!!!!!!!
Re: gargoyle-ispy 2017-January-12 02:59.torrent
Posted: Wed Jan 18, 2017 2:28 am
by Lantis
lilunxm12 wrote:Lantis wrote:lilunxm12 wrote:The "close and apply changes" button on QoS mini window doesn't work for me. The window won't close and the change wasn't saved either. Tested with Archer C7 V2, firefox 50.1, latest stable edge.
Edit: the "close and discard changes" button works as intended, just "close and apply changes" button is broken.
I can't replicate this behaviour. Works fine on my end.
Anyone else seeing this issue?
I digged it a little more and found that only the edit button for "QoS (Upload) -- Service Classes" is broken.
QoS (Upload) -- Classification Rules -OK
QoS (Download) -- Classification Rules -OK
QoS (Download) -- Service Classes - OK
Thanks for narrowing it down.
Fixed in the next version:
https://github.com/ericpaulbishop/gargoyle/pull/594
Re: gargoyle-ispy 2017-January-12 02:59.torrent
Posted: Wed Jan 18, 2017 9:41 am
by tapper
Hi my wrt1900ac is dropping 2.4 connections with this build. It happened in a old build but hasn't happened for a wile now. It's just one Asus laptop that does it. I can work around it by running my 2.4 ghz network from my c7 setup as a dumb AP. Does this build have the latest drivers for the wrt1xx routers?
Re: gargoyle-ispy 2017-January-12 02:59.torrent
Posted: Wed Jan 18, 2017 12:10 pm
by tapper
Hi in the GUI it says2.4GHz Operation Mode: B+G+N
In my etc/config/wireless it says
option type 'mac80211'
option hwmode '11g'
Is this rite?
Should it be option hwmode '11n'?
Re: gargoyle-ispy 2017-January-12 02:59.torrent
Posted: Wed Jan 18, 2017 3:52 pm
by Lantis
11g is correct.
Yes it has the latest drivers.
When you had trouble with this laptop last time you never tested turning 802.11n off completely.
Re: gargoyle-ispy 2017-January-12 02:59.torrent
Posted: Wed Jan 18, 2017 4:00 pm
by tapper
Lantis wrote:11g is correct.
Yes it has the latest drivers.
When you had trouble with this laptop last time you never tested turning 802.11n off completely.
Good point will test that out thanks.
Re: gargoyle-ispy 2017-January-12 02:59.torrent
Posted: Wed Jan 18, 2017 6:23 pm
by tapper
So I swiched to 11g on my wrt1900ac and both my cromecasts don't streem proper but the lap top works lol
Re: gargoyle-ispy 2017-January-12 02:59.torrent
Posted: Sat Jan 21, 2017 4:14 am
by porkypete
I have 1.9.x (jan12) on C7 v.2.0
When rebooting with "Reboot Now" the PPoE connection is not established. I have to re-enter the password and save to establish connection.
the auto-reboot (currently set to daily) has no problems re-establishing the link.
I believe I had this issue in 1.9.1 too, but didn't make the connection back then....