Router Firmware Requests

Suggest improvements and new features for Gargoyle.

Moderator: Moderators

Locked
Lantis
Moderator
Posts: 6735
Joined: Mon Jan 05, 2015 5:33 am
Location: Australia

Re: Router Firmware Requests

Post by Lantis »

scrmtrey wrote:What about asus rt-ac55u? I think hardware is supported but no firmware was build for it. (I think it has similair cpu if not the same like other router which got firmware image)

I would be really happy to run gargoyle on this router. (Would be perfect router overall)
I can't find any openwrt support at all. That wiki page is just a generic copy paste.
http://lantisproject.com/downloads/gargoyle_ispyisail.php for the latest releases
Please be respectful when posting. I do this in my free time on a volunteer basis.

scrmtrey
Posts: 102
Joined: Wed May 14, 2014 2:25 am

Re: Router Firmware Requests

Post by scrmtrey »

Like netgear r6100 and it is supported by openwrt. So the driver is ath9k and ath10k for 5ghz (like archer c7 v2).
wdr3600 v1.5 @ Latest ispyisail build

Lantis
Moderator
Posts: 6735
Joined: Mon Jan 05, 2015 5:33 am
Location: Australia

Re: Router Firmware Requests

Post by Lantis »

Unless it is supported I can't help you sorry.
http://lantisproject.com/downloads/gargoyle_ispyisail.php for the latest releases
Please be respectful when posting. I do this in my free time on a volunteer basis.

asdfffdsa
Posts: 3
Joined: Wed Jun 22, 2016 11:02 am

Re: Router Firmware Requests

Post by asdfffdsa »

I'm a little confused--are these images tested? I would like to use the WR842NDv2 image. Has anyone tried it?
Last edited by asdfffdsa on Wed Jun 29, 2016 1:04 pm, edited 1 time in total.

Lantis
Moderator
Posts: 6735
Joined: Mon Jan 05, 2015 5:33 am
Location: Australia

Re: Router Firmware Requests

Post by Lantis »

By 1-2 users in general.
http://lantisproject.com/downloads/gargoyle_ispyisail.php for the latest releases
Please be respectful when posting. I do this in my free time on a volunteer basis.

eaglef00t
Posts: 1
Joined: Wed Jun 29, 2016 12:37 pm

Re: Router Firmware Requests

Post by eaglef00t »

Router Model: Netgear R6300v2
Link to Openwrt wiki: https://wiki.openwrt.org/toh/netgear/netgear_r6300_v2
Is it supported in Openwrt? Yes
Does it have > 4MB of flash? Yes
Does it have > 8MB of flash? Yes
Does it have USB support? Yes
Last edited by eaglef00t on Wed Jul 13, 2016 11:09 am, edited 1 time in total.

KuriKai
Posts: 3
Joined: Sun May 05, 2013 11:03 pm

Re: Router Firmware Requests

Post by KuriKai »

I would be grateful if it could be built for this

Router Model: DIR-600 B2
Link to Openwrt wiki: https://wiki.openwrt.org/toh/d-link/dir-300revb
Is it supported in Openwrt Chaos_Calmer Branch? Yes
Does it have >= 8MB of flash? Yes (32MiB)
Does it have USB support? No

Regards,
KuriKai




Notes from Lantis:
Rejected - 4MB flash

Lantis
Moderator
Posts: 6735
Joined: Mon Jan 05, 2015 5:33 am
Location: Australia

Re: Router Firmware Requests

Post by Lantis »

KuriKai wrote:I would be grateful if it could be built for this

Router Model: DIR-600 B2
Link to Openwrt wiki: https://wiki.openwrt.org/toh/d-link/dir-300revb
Is it supported in Openwrt Chaos_Calmer Branch? Yes
Does it have >= 8MB of flash? Yes (32MiB)
Does it have USB support? No

Regards,
KuriKai
Sorry not possible.
Someone has reversed the numbers on that page.
It has 32MB of RAM, but only 4MB of flash. This is below the minimum requirement for gargoyle.
Apologies.
http://lantisproject.com/downloads/gargoyle_ispyisail.php for the latest releases
Please be respectful when posting. I do this in my free time on a volunteer basis.

bizonUa
Posts: 5
Joined: Thu Jul 21, 2016 6:19 am

Re: Router Firmware Requests

Post by bizonUa »

Router Model: D-Link DAP-1350
Link to Openwrt wiki: https://wiki.openwrt.org/toh/d-link/dap-1350
Is it supported in Openwrt Chaos_Calmer Branch? Yes
Does it have >= 8MB of flash? Yes
Does it have USB support? Yes

P.S. On my dap-1350 openwrt-15.05-ramips-rt305x-dap-1350WW-squashfs-factory.bin install and work well, but I love Gargoyle.

Thank You!!!

dragonmax
Posts: 7
Joined: Sun Jul 31, 2016 10:26 pm

Re: Router Firmware Requests

Post by dragonmax »

Firmware for wt3020 4MB Flash(Please upload ASAP)
MT7620n
It doesn't have usb port.
it is supported by openwrt
https://downloads.openwrt.org/latest/ra ... pgrade.bin
Thanks
:ugeek:

Locked