Router Firmware Requests

Suggest improvements and new features for Gargoyle.

Moderator: Moderators

Locked
Lantis
Moderator
Posts: 6735
Joined: Mon Jan 05, 2015 5:33 am
Location: Australia

Re: Router Firmware Requests

Post by Lantis »

EJM3 wrote:===================================================================
I have a couple of GL.iNet 6416A routers that I use as repeaters for my home net, I already have 1.7.1 installed on them. I'd be willing to slap a copy of 1.9.x onto one & give it a test drive, I'd even be sure to run most traffic through the new install to give it a workout; plus report any bugs back to you...

Thanks in advance


Router Model: GLI GL.iNet 6416A
Link to Openwrt wiki: https://wiki.openwrt.org/toh/gl-inet/gl-inet_64xx
Is it supported in Openwrt? Yes
Does it have >= 4MB of flash? Yes
Does it have >= 8MB of flash? Yes
Does it have USB support? Yes


Notes from Lantis:
Accepted
EJM3 has reported this firmware as stable.
You can find it here
http://lantisproject.com/downloads/gargoyle_ispyisail.php for the latest releases
Please be respectful when posting. I do this in my free time on a volunteer basis.

L0RDZ1C4
Posts: 4
Joined: Mon Feb 29, 2016 9:15 pm

Re: Router Firmware Requests

Post by L0RDZ1C4 »

Router Model: D-Link Dir-850L ac1200
Link to Openwrt wiki: ------------
Is it supported in Openwrt? I don't know
Does it have > 4MB of flash? Yes
Does it have > 8MB of flash? Yes
Does it have USB support? Yes

I need a help with my router, i wanna put a gargoyle firmware, but i don't know what is compatible. Can you help me?
Thanks



Notes from Lantis:
Rejected - No Openwrt Support

Lantis
Moderator
Posts: 6735
Joined: Mon Jan 05, 2015 5:33 am
Location: Australia

Re: Router Firmware Requests

Post by Lantis »

It isn't supported in Openwrt as far as I can tell.
Your first port of call would be to those guys.

If you go to the wikidevi site you can see that there has been some success with getting openwrt to run on similar chipsets so it may be possible in the future at some stage.

Until then however there is nothing I can do sorry.
http://lantisproject.com/downloads/gargoyle_ispyisail.php for the latest releases
Please be respectful when posting. I do this in my free time on a volunteer basis.

Adri
Posts: 46
Joined: Wed Jul 20, 2011 4:03 am

Re: Router Firmware Requests

Post by Adri »

Router Model: Linksys/Cisco WRT320N
Link to Openwrt wiki: https://wiki.openwrt.org/toh/linksys/wrt320n
Is it supported in Openwrt Chaos_Calmer Branch? Yes
Does it have >= 8MB of flash? Yes
Does it have USB support? No

Router is broadcom BCM4717A1 with 8MB flash.
Almost identical to E2000, except for flash partition layout and bootloader.



Notes from Lantis:
Accepted

tushal2
Posts: 1
Joined: Sat Mar 12, 2016 11:50 am

Re: Router Firmware Requests

Post by tushal2 »

Router Name: TP-Link
Model: 841N
Version: V11

Link to Openwrt wiki:https://wiki.openwrt.org/toh/tp-link/tl-wr841nd
Is it supported in Openwrt? Yes.
4MB Flash
32MB RAM
No USB Support

I want to install gargoyle firmware because of the bandwidth allocated option.



Notes from Lantis:
Rejected - Trunk support only

Lantis
Moderator
Posts: 6735
Joined: Mon Jan 05, 2015 5:33 am
Location: Australia

Re: Router Firmware Requests

Post by Lantis »

The 841n v11 is only supported in the latest trunk builds. If support is back ported to chaos calmer or gargoyle is moves forward you can request again and I'll reevaluate
Cheers .
http://lantisproject.com/downloads/gargoyle_ispyisail.php for the latest releases
Please be respectful when posting. I do this in my free time on a volunteer basis.

neatomos
Posts: 23
Joined: Fri May 08, 2009 4:44 pm

Re: Router Firmware Requests

Post by neatomos »

Kind of a longshot but here goes...

Router Model: Ubiquiti EdgeRouter Lite
Link to Openwrt wiki: https://wiki.openwrt.org/toh/ubiquiti/edgerouter.lite
Is it supported in Openwrt Chaos_Calmer Branch? Yes
Does it have >= 8MB of flash? Yes
Does it have USB support? Yes

https://forum.openwrt.org/viewtopic.php?id=49908

meazz1
Posts: 65
Joined: Mon Dec 07, 2015 4:40 pm
Location: Auburn, GA. USA

Re: Router Firmware Requests

Post by meazz1 »

I would appreciate if you look into making this firmware available for

Router Model: TP Link TL WR1043 v3.0
Link to Openwrt wiki: https://wiki.openwrt.org/toh/hwdata/tp- ... r1043nd_v3
Is it supported in Openwrt? Yes
Does it have >= 4MB of flash? Yes
Does it have >= 8MB of flash? Yes
Does it have USB support? Yes



Notes from Lantis:
Accepted

rt_rex
Posts: 44
Joined: Mon Aug 15, 2011 9:39 am

Re: Router Firmware Requests

Post by rt_rex »

Hi guys, is it possible to support this router too?
Thank you.

Router Model: Meraki MR12
Link to Openwrt wiki: https://wiki.openwrt.org/toh/meraki/mr12
Is it supported in Openwrt? Yes , since r45726 (CC trunk)
Does it have >= 4MB of flash? Yes 16MB
Does it have >= 8MB of flash? Yes 16MB
Does it have USB support? No


Notes from Lantis:
Accepted
WIFI Link @ 76 km

http://youtu.be/rrXanzlro78

NineIguanas
Posts: 7
Joined: Wed Apr 06, 2016 9:37 pm

Re: Router Firmware Requests

Post by NineIguanas »

TP Link TL WR1043 v3.0
+1 for above request! Would be much appreciated. This chassis is a great work horse with a good radio section - I install a few every week!

Apparently it's the same hardware as v2, just needs the "h/w identifier" code changed.

Router Model: TP Link TL WR1043 v3.0
Link to Openwrt wiki: https://wiki.openwrt.org/toh/hwdata/tp- ... r1043nd_v3
Is it supported in Openwrt? Yes
Does it have >= 4MB of flash? Yes
Does it have >= 8MB of flash? Yes
Does it have USB support? Yes



Notes from Lantis:
Accepted

Locked