Hi!
I have a TP-LINK TL-WR842ND with Gargoyle installed, but before I had Gargoyle I used OpenWrt with luci and I saw a nice feature within to show the current cpu load by flashing a selected led like heart beat.
Is it possible to make this feature in Gargoyle with the bandwith usage?
Bandwith usage heartbeat
Moderator: Moderators
-
DoesItMatter
- Moderator
- Posts: 1373
- Joined: Thu May 21, 2009 3:56 pm
Re: Bandwith usage heartbeat
http://wiki.openwrt.org/doc/uci/system#heartbeat
Looks like you have to add it on your own compiled images
and the kernel module for hearbeat is only for cpu usage
You would have to program your own module to make it trigger
for bandwidth usage.
Unfortunately not as simple as just adding it into your compile.
Looks like you have to add it on your own compiled images
and the kernel module for hearbeat is only for cpu usage
You would have to program your own module to make it trigger
for bandwidth usage.
Unfortunately not as simple as just adding it into your compile.
Soylent Green Is People! 2x Asus RT-N16 = Asus 3.0.0.4.374.43 Merlin
2x Buffalo WZR-HP-G300NH V1 A0D0 = Gargoyle 1.9.x / LEDE 17.01.x
2x Engenius - ESR900 Stock 1.4.0 / OpenWRT Trunk 49400