Page 9 of 9

Re: Allow Channels 12,13,14 based on country (*MOD*)

Posted: Sun Dec 03, 2017 7:24 am
by aleks87
отсылал вот такие команды iw reg get
iw reg set RU
uci set wireless.radio0.country=RU
uci set wireless.radio1.country=RU
uci commit wireless
uci show wireless
iw reg get ставил страну россию так как нас 13 канал разрешен отсылаю команды делаю перезагрузку и все опять становить также страну не запоминает а ставит сша и все что делать кто подскажет????
sent here such commands iw reg get
iw reg set RU
uci set wireless.radio0.country = RU
uci set wireless.radio1.country = RU
uci lodge wireless
uci show wireless
iw reg get put the country to russia since we are allowed to send the channel 13 to the command and I restart it and everything again does not remember the country, but puts the United States and all that do who will tell ????

Re: Allow Channels 12,13,14 based on country (*MOD*)

Posted: Sun Dec 03, 2017 8:21 am
by Lantis
iw reg set does nothing.

What firmware version and router model?

Re: Allow Channels 12,13,14 based on country (*MOD*)

Posted: Sun Dec 03, 2017 8:49 am
by aleks87
TP-Link TL-MR3420 V2 прошивка Версия 1.10.0

Re: Allow Channels 12,13,14 based on country (*MOD*)

Posted: Sun Dec 03, 2017 3:45 pm
by Lantis
I think you are doing everything correctly.
However, due to the lack of flash space on your router, the config is not saving properly. This is very common with 4MB devices.

There is likely no fix available to you.

Re: Allow Channels 12,13,14 based on country (*MOD*)

Posted: Sat Apr 14, 2018 3:25 am
by Grg
Hello,

I try the following in webshell:

uci set wireless.radio0.country=HU
uci commit wireless


I get the following, but why phy#0 is remain in US?
(However i can select channel 12&13)

global
country HU: DFS-ETSI
(2402 - 2482 @ 40), (N/A, 20), (N/A)
(5170 - 5250 @ 80), (N/A, 20), (N/A), AUTO-BW
(5250 - 5330 @ 80), (N/A, 20), (0 ms), DFS, AUTO-BW
(5490 - 5710 @ 160), (N/A, 27), (0 ms), DFS
(57000 - 66000 @ 2160), (N/A, 40), (N/A)

phy#0
country US: DFS-FCC
(2402 - 2472 @ 40), (N/A, 30), (N/A)
(5170 - 5250 @ 80), (N/A, 23), (N/A), AUTO-BW
(5250 - 5330 @ 80), (N/A, 23), (0 ms), DFS, AUTO-BW
(5490 - 5730 @ 160), (N/A, 23), (0 ms), DFS
(5735 - 5835 @ 80), (N/A, 30), (N/A)
(57240 - 63720 @ 2160), (N/A, 40), (N/A)

global
country HU: DFS-ETSI
(2402 - 2482 @ 40), (N/A, 20), (N/A)
(5170 - 5250 @ 80), (N/A, 20), (N/A), AUTO-BW
(5250 - 5330 @ 80), (N/A, 20), (0 ms), DFS, AUTO-BW
(5490 - 5710 @ 160), (N/A, 27), (0 ms), DFS
(57000 - 66000 @ 2160), (N/A, 40), (N/A)

Success

Re: Allow Channels 12,13,14 based on country (*MOD*)

Posted: Sat Apr 14, 2018 7:18 pm
by Lantis
As long as global is fine I think it is no problem.
Big in iw that showed up a few versions ago.
Or indicates something else I don’t understand.