I have 5G set to 80Mhz and Channel 36,
with spectrum analyzer i see networks
Channel 36-48 and 52-64.
But if i change to channel 52 i see nothing after minutes in spectrum analyzer.
Also i tried other channels and higher mhz.
Why i don`t see other networks if change channel and mhz?
Only 36 Channel and 80 Mhz i see all.
Has this somehow to be defined in wireless too if change my 5GHZ wifi? A+N+AC is set
Spectrum Analyser 5G WRT32X
Moderator: Moderators
Re: Spectrum Analyser 5G WRT32X
This is likely to be caused by DFS.
You can wait up to a minute for WiFi to start broadcasting, it may be broadcast with less power, or in extreme cases it will not broadcast at all.
https://netbeez.net/blog/dfs-channels-wifi/
https://en.wikipedia.org/wiki/List_of_W ... .11j)_WLAN
You can wait up to a minute for WiFi to start broadcasting, it may be broadcast with less power, or in extreme cases it will not broadcast at all.
https://netbeez.net/blog/dfs-channels-wifi/
https://en.wikipedia.org/wiki/List_of_W ... .11j)_WLAN
Turris Omnia with OpenWrt 21.02 - Tested
Linksys WRT3200ACM with Gargoyle 1.13.x
TL-WR1043ND v2 with Gargoyle 1.10.0
http://gargoyle.romanhk.cz custom builds by gargoyle users
Linksys WRT3200ACM with Gargoyle 1.13.x
TL-WR1043ND v2 with Gargoyle 1.10.0
http://gargoyle.romanhk.cz custom builds by gargoyle users
-
- Posts: 1
- Joined: Tue Sep 01, 2020 6:21 am
- Contact:
Re: Spectrum Analyser 5G WRT32X
Great. I am also stuck in this. Thank you very much.
I am a real estate agent in the Netherlands. I have a small family in Amsterdam.