Best settings for gaming QoS+DSCP

Report issues relating to bandwith monitoring, bandwidth quotas or QoS in this forum.

Moderator: Moderators

-taz-
Posts: 44
Joined: Wed Oct 23, 2019 11:21 pm

Re: Best settings for gaming QoS+DSCP

Post by -taz- »

Be careful, you cannot use TOS with DSCP, choose to use DSCP or TOS, not both


My configuration worked?

VanCleef
Posts: 51
Joined: Tue Jul 09, 2019 9:01 am

Re: Best settings for gaming QoS+DSCP

Post by VanCleef »

I still prefer to prioritize only the udp ports and leave ack and tcp aside.

Using basically the same as before:

iptables -t mangle -N qos_in
iptables -t mangle -F qos_in

iptables -t mangle -A PREROUTING -i eth0.2 -j qos_in
iptables -t mangle -A INPUT -i eth0.2 -j qos_in
iptables -t mangle -A FORWARD -i eth0.2 -j qos_in


iptables -t mangle -A qos_in -j DSCP --set-dscp 0

iptables -t mangle -A qos_in -p icmp -j DSCP --set-dscp-class CS6

iptables -t mangle -A qos_in -d 192.168.1.142 -p udp --dport 1024:65535 -j DSCP --set-dscp-class CS6


iptables -t mangle -N qos_out
iptables -t mangle -F qos_out

iptables -t mangle -A OUTPUT -o eth0.2 -j qos_out
iptables -t mangle -A FORWARD -o eth0.2 -j qos_out
iptables -t mangle -A POSTROUTING -o eth0.2 -j qos_out

iptables -t mangle -A qos_out -p icmp -j DSCP --set-dscp-class CS6

iptables -t mangle -A qos_out -s 192.168.1.142 -p udp --sport 1024:65535 -j DSCP --set-dscp-class CS5

sometimes in search of perfection
We forget that when the connection is bad, the problem may be on other players' internet and not ours.
So I will try to keep my settings for now :D
TP-Link Archer C7 v2
Gargoyle: 1.10.0
Down: 38MB
Up: 6.5MB

-taz-
Posts: 44
Joined: Wed Oct 23, 2019 11:21 pm

Re: Best settings for gaming QoS+DSCP

Post by -taz- »

In my case, eth0.2 is not used. I recommend that you see if your rules are activated with iptables -t mangle -vnL. I suggest you use EF because it activates the "cough" delay minimization marks. and if the games are practically for use with udp but it is also important to have the TCP (flags) active and corrected for a good ping, and you can try icmp type 8.


remember that a connection starts with an ack / syn

VanCleef
Posts: 51
Joined: Tue Jul 09, 2019 9:01 am

Re: Best settings for gaming QoS+DSCP

Post by VanCleef »

I confused!

This is what I used before with openwrt and sqm

This is what I currently use:


iptables -t mangle -A PREROUTING -j DSCP --set-dscp 0


iptables -t mangle -A INPUT -p icmp --icmp-type 0 -j DSCP --set-dscp-class EF

iptables -t mangle -A OUTPUT -p icmp --icmp-type 8 -j DSCP --set-dscp-class EF

iptables -t mangle -A FORWARD -p icmp -j DSCP --set-dscp-class CS6


iptables -t mangle -A FORWARD -d 192.168.1.142 -p udp --sport 1024:65535 -j DSCP --set-dscp-class CS6

iptables -t mangle -A FORWARD -s 192.168.1.142 -p udp --dport 1024:65535 -j DSCP --set-dscp-class CS4


I also changed the direction of the ports in qos gargoyle, it makes more sense:

(download)
Source Port: 1024-65535, Destination: 192.168.1.142, Transport Protocol: UDP

(upload)
Source: 192.168.1.142, Destination Port: 1024-65535, Transport Protocol: UDP


Using the interface in the rule (eth0.2 in this case) is optional.

EF for me,from my ps4 to internet, sometimes causes packet loss.
I believe the misuse of EF on the internet (such as marking torrents as EF) should cause congestion and discard the package at some point.

That's why I like it to set the entry to zero, because many packets arrive marked as EF the wrong way.
TP-Link Archer C7 v2
Gargoyle: 1.10.0
Down: 38MB
Up: 6.5MB

-taz-
Posts: 44
Joined: Wed Oct 23, 2019 11:21 pm

Re: Best settings for gaming QoS+DSCP

Post by -taz- »

when I combined icmp type 0 with type 8 was that I started losing packages

VanCleef
Posts: 51
Joined: Tue Jul 09, 2019 9:01 am

Re: Best settings for gaming QoS+DSCP

Post by VanCleef »

how is your rule of icmp type?
TP-Link Archer C7 v2
Gargoyle: 1.10.0
Down: 38MB
Up: 6.5MB

jaz
Posts: 1
Joined: Sat Jan 04, 2020 1:28 pm

Re: Best settings for gaming QoS+DSCP

Post by jaz »

Hi, I'd like to ask if dscp it's supported by gargoyle v1.6.2

SG TCP/IP Analyzer results:
« TCP Analyzer Results »
Tested on: 2020.01.04 15:47
IP address: 200.32.xxx.xxx
Client OS/browser: Windows 8.1 (Firefox 71.0)

TCP options string: 020405b40103030801010402
MSS: 1460
MTU: 1500
TCP Window: 65536 (not multiple of MSS)
RWIN Scaling: 8 bits (2^8=256)
Unscaled RWIN : 256
Recommended RWINs: 64240, 128480, 256960, 513920, 1027840
BDP limit (200ms): 2621kbps (328KBytes/s)
BDP limit (500ms): 1049kbps (131KBytes/s)
MTU Discovery: ON
TTL: 114
Timestamps: OFF
SACKs: ON
IP ToS: 00000000 (0)

I'm currently using these settings and changed ports for battlefield 4:

iptables -t mangle -A POSTROUTING -j DSCP --set-dscp-class CS0

iptables -t mangle -A POSTROUTING -p icmp -j DSCP --set-dscp-class EF

iptables -t mangle -A POSTROUTING -p udp --match multiport --sport 3659,14000:14016,22990:23006,25200:25300 -j DSCP --set-dscp-class EF

iptables -t mangle -A POSTROUTING -p udp --match multiport --dport 3659,14000:14016,22990:23006,25200:25300 -j DSCP --set-dscp-class EF

Saved these changes and /etc/init.d/firewall restart without issues but I don't know if it's working

-taz-
Posts: 44
Joined: Wed Oct 23, 2019 11:21 pm

Re: Best settings for gaming QoS+DSCP

Post by -taz- »

the page is showing only the cs0 rule when you start using udp you will use the dscp EF you can watch by running iptables -t mangle -vnL

-taz-
Posts: 44
Joined: Wed Oct 23, 2019 11:21 pm

Re: Best settings for gaming QoS+DSCP

Post by -taz- »

Hi

I am currently using this

There are micro cuts, so to speak, sometimes my bullets do not register, but it is already very rare.

Other than that, I don't touch anything else on the router.

Recommended:
MTU Default DO NOT use QOS GARGOYLE.
I use DHCP to reserve the range of IP addresses to other devices and my separate IP, so my IP has priority with the DSCP EF. With these rules I could see transmissions without failures while saturating the network with other devices
Image

iptables -t mangle -N qos_plus_up
iptables -t mangle -A PREROUTING -j qos_plus_up
iptables -t mangle -A INPUT -i pppoe-wan -j qos_plus_up
iptables -t mangle -A FORWARD -i pppoe-wan -j qos_plus_up

iptables -t mangle -A qos_plus_up -p tcp -m tcp --tcp-flags PSH PSH -j MARK --set-mark 0x2
iptables -t mangle -A qos_plus_up -p tcp -m tcp --tcp-flags ACK ACK -j MARK --set-mark 0x2
iptables -t mangle -A qos_plus_up -p tcp -m tcp --tcp-flags SYN SYN -j MARK --set-mark 0x2
iptables -t mangle -A qos_plus_up -p tcp -m tcp --tcp-flags RST RST -j MARK --set-mark 0x2
iptables -t mangle -A qos_plus_up -p tcp -m tcp --tcp-flags FIN FIN -j MARK --set-mark 0x2
iptables -t mangle -A qos_plus_up -d 192.168.1.124 -j MARK --set-mark 0x2
iptables -t mangle -A qos_plus_up -p icmp --icmp-type 8 -j MARK --set-mark 0x2 -s 192.168.1.124
iptables -t mangle -A qos_plus_up -s 192.168.1.124 -j DSCP --set-dscp-class EF/101110
iptables -t mangle -A qos_plus_up -d 192.168.1.124 -j DSCP --set-dscp-class EF/101110
iptables -t mangle -A qos_plus_up -s 192.168.1.8/29 -j DSCP --set-dscp-class CS1
iptables -t mangle -A qos_plus_up -j CONNMARK --restore-mark
iptables -t mangle -A qos_plus_up -p udp -m connbytes --connbytes 0:700 --connbytes-dir both --connbytes-mode avgpkt -j DSCP --set-dscp-class EF/101110

iptables -t mangle -N qos_plus_down
iptables -t mangle -A POSTROUTING -o pppoe-wan -j qos_plus_down

iptables -t mangle -A qos_plus_down -p tcp -m tcp --tcp-flags PSH PSH -j MARK --set-mark 0x200
iptables -t mangle -A qos_plus_down -p tcp -m tcp --tcp-flags ACK ACK -j MARK --set-mark 0x200
iptables -t mangle -A qos_plus_down -p tcp -m tcp --tcp-flags SYN SYN -j MARK --set-mark 0x200
iptables -t mangle -A qos_plus_down -p tcp -m tcp --tcp-flags RST RST -j MARK --set-mark 0x200
iptables -t mangle -A qos_plus_down -p tcp -m tcp --tcp-flags FIN FIN -j MARK --set-mark 0x200
iptables -t mangle -A qos_plus_down -s 192.168.1.124 -j MARK --set-mark 0x200
iptables -t mangle -A qos_plus_down -p icmp --icmp-type 8 -j MARK --set-mark 0x200 -s 192.168.1.124
iptables -t mangle -A qos_plus_down -s 192.168.1.124 -j DSCP --set-dscp-class EF/101110
iptables -t mangle -A qos_plus_down -s 192.168.1.8/29 -j DSCP --set-dscp-class CS1
iptables -t mangle -A qos_plus_down -j CONNMARK --save-mark



iptables -t mangle -A POSTROUTING -p icmp --icmp-type 8 -s 192.168.1.124 -j RETURN
iptables -t mangle -A PREROUTING -p icmp --icmp-type 8 -s 192.168.1.124 -j RETURN
iptables -t mangle -A FORWARD -p icmp --icmp-type 8 -s 192.168.1.124 -j RETURN

VanCleef
Posts: 51
Joined: Tue Jul 09, 2019 9:01 am

Re: Best settings for gaming QoS+DSCP

Post by VanCleef »

Hey Taz

what the marks do?
such as:

MARK --set-mark 0x2

MARK --set-mark 0x200
TP-Link Archer C7 v2
Gargoyle: 1.10.0
Down: 38MB
Up: 6.5MB

Post Reply