Auralic/UDP Multcast
Posted: Sun Mar 06, 2016 6:07 am
Hello,
I have purchased an Auralic Mini to use as a music steamer and am attempting to connect it to a Gargoylr router (TP-Link TL-WR1043N/ND v1 with 1.8,.1). During install I get a message from the Auralic control app that implies the modem/router needs to support USP/multicast SSHP. I have raised it with Auralic but have not had any luck.
I think the problem may be resolved by this: https://wiki.openwrt.org/doc/howto/udp_multicast. But is there a simple/complete explanation for a non network person about what's going on and what needs to be done. Would I be better off raising it at the OpenWRT.org?
As a last (expensive) resort can I simply (ethernet) connect a modem known to work with the Auralic box as a client of the Gargoyle router and take it from there?
Rgds
Tim
I have purchased an Auralic Mini to use as a music steamer and am attempting to connect it to a Gargoylr router (TP-Link TL-WR1043N/ND v1 with 1.8,.1). During install I get a message from the Auralic control app that implies the modem/router needs to support USP/multicast SSHP. I have raised it with Auralic but have not had any luck.
I think the problem may be resolved by this: https://wiki.openwrt.org/doc/howto/udp_multicast. But is there a simple/complete explanation for a non network person about what's going on and what needs to be done. Would I be better off raising it at the OpenWRT.org?
As a last (expensive) resort can I simply (ethernet) connect a modem known to work with the Auralic box as a client of the Gargoyle router and take it from there?
Rgds
Tim