alx0101 wrote:1.9.X (Built 20160103-1917 git@5b7c763)
Model:TP-Link TL-WR1043N/ND v2
Still fails in wireless bridge-repeater.
Works for a few minutes ..sometimes slow to access the router...then eventually clients lose network access completely.
Also, plugins..could not install LOG READ...click install but after some whirrring...still not installed.
EDIT: it installed after a reboot. Also back in Gateway wireless..works fine as before (just not bridge)
Hi alx0101 what is your mane Router?
I use wifi bridge in my house all the time. I will explain how i have mine setup.
I have my mane AP setup downstairs it's a wdr3600 here is it's mane page:
Gargoyle
Router
Management
Utility
Device Name: Tapper'sAP
Status
Device Name:
Tapper'sAP
Gargoyle Version:
1.9.X (Built 20160103-1917 git@5b7c763)
Model:
TP-Link TL-WDR3600 v1
Device Configuration:
Gateway
Memory Usage:
21.5MB / 123.1MB (17.4%)
Connections:
209/16384
CPU Load Averages:
0.00 / 0.01 / 0.05 (1/5/15 minutes)
Uptime:
0 days, 19 hours, 28 minutes
Current Date & Time:
01/10/16 19:34 GMT
WAN IP Address:
xx.xx.xx.xxx
WAN Netmask:
255.255.240.0
WAN MAC Address:
E8:DE:27:xx:xx:C5
WAN Gateway IP:
86.xx.xx.1
WAN DNS Server(s):
208.67.220.220
208.67.222.222
LAN IP Address:
192.168.1.1
LAN Netmask:
255.255.255.0
LAN MAC Address:
E8:DE:xx:xx:D5:C5
Port
Status
LAN1
1Gbps
LAN2
-
LAN3
-
LAN4
1Gbps
Wireless Mode:
Access Point (AP)
Wireless MAC Address:
E8:DE:27:xx:xx:C6
2.4 GHz Access Point SSID:
tapper's net
5GHz Access Point SSID:
tapper's net
QoS Upload:
Enabled
QoS Download:
Enabled
Now for the wifibridge:
Gargoyle
Router
Management
Utility
Status
Device Name:
Gargoyle
Gargoyle Version:
1.9.X (Built 20151228-2140 git@b93d5e4)
Model:
WD My Net N750
Device Configuration:
Wireless Bridge/Repeater
Memory Usage:
19MB / 123.1MB (15.4%)
Connections:
30/4096
CPU Load Averages:
0.00 / 0.01 / 0.05 (1/5/15 minutes)
Uptime:
0 days, 9 hours, 17 minutes
Current Date & Time:
01/10/16 7:38 PM GMT
Bridge IP Address:
192.168.1.3
Bridge Netmask:
255.255.255.0
Bridge MAC Address:
00:90:A9:xx:xx:88
LAN Gateway IP:
192.168.1.1
Connected via:
Client Bridge
Bridge SSID:
tapper's net
QoS Upload:
Disabled
QoS Download:
Disabled
and here is my 32nd wifi bridge:
Gargoyle
Router
Management
Utility
Status
Device Name:
Tapper's Bridge2
Gargoyle Version:
1.6.2
Model:
TP-Link TL-WR1043N/ND v2
Device Configuration:
Wireless Bridge/Repeater
Memory Usage:
15.3MB / 60.2MB (25.4%)
Connections:
34/16384
CPU Load Averages:
0.07 / 0.05 / 0.05 (1/5/15 minutes)
Uptime:
0 days, 7 hours, 29 minutes
Current Date & Time:
01/10/16 7:40 PM GMT
Bridge IP Address:
192.168.1.2
Bridge Netmask:
255.255.255.0
Bridge MAC Address:
xx:xx:00:51:0A:EF
LAN Gateway IP:
192.168.1.1
Connected via:
Client Bridge
Bridge SSID:
tapper's net
QoS Upload:
Disabled
QoS Download:
Disabled