Problems with repeater / DLNA

Report wireless and/or network connectivity problems in this forum.

Moderator: Moderators

Post Reply
phantomas
Posts: 1
Joined: Fri May 22, 2015 3:58 am

Problems with repeater / DLNA

Post by phantomas »

Hi, my problem is the second router as bridge. If I use the main router wifi everything is right (sometimes is not good for a hd streaming) but if I try to use a second router as bridge the NAS doesn't appear on tv. I've tried dd-wrt, stock and Gargoyle on my tp link tl-wr1043nd v1.x and it's not possible to get a successful transparent bridge. I want to connect my synology nas with my samsung tv over a bridge router.

synology x.x.1.2 ---wire--- main router x.x.1.1 )))wifi))) tv x.x.1.128 [OK]

synology x.x.1.2 ---wire--- main router x.x.1.1 )))wifi))) tl-wr1043nd x.x.1.5 )))wifi))) or ---wire--- tv x.x.1.128 [No NAS]

could you help me?

*****edit*****
I have to mention that this is the configuration on second router with gargoyle. There is a wifi signal but it doesn't works
:
Device Configuration
Configure Device As: Wireless Bridge/Repeater

Wireless Bridge/Repeater
Bridge IP: 192.168.1.5
subnet mask: 255.255.255.0
AP/Gateway IP: 192.168.1.1
Wan Ethernet Port: Disable
DNS Servers: Use Gateway As DNS Server

Connect Via Client Bridge
Repeater: Repeater Enabled:
Operation Mode: N+G+B
Channel width: 40mhz (2nd chan. below)
Transmit Power: MAx
SSID to Join: Casa (WPA2)
SSID to Broadcast: Gargoyle
Wireless Channel: 11
Encryption: WPA2 PSK

Post Reply