TL-WR741ND client+ap very low speed

Report wireless and/or network connectivity problems in this forum.

Moderator: Moderators

Post Reply
kprkpr
Posts: 2
Joined: Sat Mar 14, 2015 7:44 am

TL-WR741ND client+ap very low speed

Post by kprkpr »

I have a TL-WR741ND V1.8 and I set-up a Client+AP connection to amplify other router
In the "host" router I have 6-7mbps more or less, and in the 741nd I have 1mbps
The router host and this arent much far away, It shows 40% signal

And I connect to wr741n with 3-4bars

Im using gargoyle 1.6.2

How can I solve it? I dont need 100% speed.. but 4mbps minimum would be great..XD

User avatar
DoesItMatter
Moderator
Posts: 1373
Joined: Thu May 21, 2009 3:56 pm

Re: TL-WR741ND client+ap very low speed

Post by DoesItMatter »

Whenever you use AP+Client or repeater mode, your effective
bandwidth is cut in 1/2 because of overhead.

If you are getting 6-7mbps, max you would achieve is probably 3mbps
and that is at OPTIMAL (highest signal)

As the signal quality lowers, the rate will lower as well.

Unless you can get your signal to 90-100% - you won't be able
to achieve your goal
:twisted: Soylent Green Is People! :twisted:
2x Asus RT-N16 = Asus 3.0.0.4.374.43 Merlin
2x Buffalo WZR-HP-G300NH V1 A0D0 = Gargoyle 1.9.x / LEDE 17.01.x
2x Engenius - ESR900 Stock 1.4.0 / OpenWRT Trunk 49400

kprkpr
Posts: 2
Joined: Sat Mar 14, 2015 7:44 am

Re: TL-WR741ND client+ap very low speed

Post by kprkpr »

But..signal of internet of speed connectiom router-router link? Router-router is 11-18mbps but net is 6mbps
And in wr741n speed of link is 30mbps+- and net is 1-1.5mbps depending of moment
There are no ways for have a decent net with that? :(

Sumer009
Posts: 2
Joined: Fri Apr 10, 2015 12:46 am

Re: TL-WR741ND client+ap very low speed

Post by Sumer009 »

There's no other work around then using oneother version ?

https://recipesny.com/2020/12/07/chefman-air-fryer-recipes/

Post Reply